STD
What are those (603) AMG engine mounts from? - Printable Version

+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: What are those (603) AMG engine mounts from? (/showthread.php?tid=5059)

What are those (603) AMG engine mounts from? - DiseaselWeasel - 11-01-2013

Hi!

Removed from spare 603.960 engine. Noticed the bigger heat shield for the hydro mount and thought this would be a good addition to the Coupé. And then... AMwhatthehell!?

[Image: amg_motorhalter_1.jpg]

[Image: amg_motorhalter_2.jpg]

G-wagon??

Thanks!

RE: What are those (603) AMG engine mounts from? - raysorenson - 11-01-2013

http://www.mbpartsworld.com/p/Mercedes__300-CE-34-AMG/ENGINE-SUPPORT/8215617/6032234604.html

RE: What are those (603) AMG engine mounts from? - AlanMcR - 11-04-2013

(11-01-2013, 04:12 AM)DiseaselWeasel Hi!

Removed from spare 603.960 engine. Noticed the bigger heat shield for the hydro mount and thought this would be a good addition to the Coupé. And then... AMwhatthehell!?

[Image: amg_motorhalter_2.jpg]

G-wagon??

Thanks!

That would be an AMG part not a G part. The 603 was used on the G, but that arm wouldn't fit onto a W463 motor mount. The W463 motor mounts are a very strange breed. What isn't shown in the picture below is a u-shaped clamp that locks the circular part to the frame. This prevents the motor from leaving the vehicle no matter how badly the rubber is damaged.

[Image: W463EngineMount.jpg]