Feeler: 617 exhaust flanges - Printable Version +- STD (https://www.superturbodiesel.com/std) +-- Forum: Other (https://www.superturbodiesel.com/std/forumdisplay.php?fid=19) +--- Forum: FS / WTB / Buying guides (https://www.superturbodiesel.com/std/forumdisplay.php?fid=8) +--- Thread: Feeler: 617 exhaust flanges (/showthread.php?tid=5156) |
Feeler: 617 exhaust flanges - Simpler=Better - 12-10-2013 Alright kids, who here would be interested in buying a 1/2" thick mild steel exhaust flange set for the 617? Option 1: ~$100 Flange set, 1.25" bores. Make your own stud standoffs from pipe. Option 2: ~$100 Flange set, 1.5" bores with flattened edges. Would required grinding and getting creative to get stud supports in there. Option 3: ~$150 Flange set, 1.25" bores, with 10x stamped 90* tight-radius weld-els included. Option 4: ~$150 Flange set, 1.5" bores, with 10x stamped 90* tight-radius weld-els included. These are 1.25" bores, the red shading is a standard gasket These are 1.5" bores, the red shading is a standard gasket |