STD
Where can i get a ext Manifold???!!!! - Printable Version

+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: Where can i get a ext Manifold???!!!! (/showthread.php?tid=5250)



Where can i get a ext Manifold???!!!! - pmj4147 - 01-12-2014

I'm using 602

and installed 7.5mm last month.


i'm planning for T67 25G turbo from ebay,
but i need manifold first!!

Where can i get a 5cyl manifold???
(Has to be realllllyyyy strong)


RE: Where can i get a ext Manifold???!!!! - hansebanger77 - 01-12-2014

(01-12-2014, 12:50 PM)pmj4147 I'm using 602

and installed 7.5mm last month.


i'm planning for T67 25G turbo from ebay,
but i need manifold first!!

Where can i get a 5cyl manifold???
(Has to be realllllyyyy strong)

KKD make good ones


RE: Where can i get a ext Manifold???!!!! - F.R.A.S - 01-13-2014

It's not as easy as just buying an exhaust manifold. It has to fit in your chassis and so on. I'm bias in this matter due to the fact that I work at the place that makes the best stuff around. But just place an order to anyone that don't sell shiny polished shit and you'll be good to go.

   


RE: Where can i get a ext Manifold???!!!! - Booster - 01-13-2014

(01-13-2014, 03:50 AM)F.R.A.S It's not as easy as just buying an exhaust manifold. It has to fit in your chassis and so on. I'm bias in this matter due to the fact that I work at the place that makes the best stuff around. But just place an order to anyone that don't sell shiny polished shit and you'll be good to go.

What about om605 in a w202 hx35 flange??

Do you make them? How much? Kkd seems to be a tad expensive to me?


RE: Where can i get a ext Manifold???!!!! - F.R.A.S - 01-13-2014

No problem at all. I work at F-tune Performance, some of our work are on the facebook site.

Cost depends on many criteria, layout, coating, WG, and so on. But send me a message and we can talk more privately.

(01-13-2014, 05:20 AM)Booster What about om605 in a w202 hx35 flange??

Do you make them? How much? Kkd seems to be a tad expensive to me?