STD
S10 Air Dam - Printable Version

+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Body Mods (https://www.superturbodiesel.com/std/forumdisplay.php?fid=21)
+--- Thread: S10 Air Dam (/showthread.php?tid=5342)



S10 Air Dam - Tmadia - 02-14-2014

So I ordered an ABS air dam for my brother's '94 S10 Blazer and since he hasn't picked it up I installed it on my '85. It is a 3 or 4 inches too narrow, but if you spread the ends apart it will fit reasonable well. I kinda like it.

Super easy to install. It has a flange around the top and I just used some self tappers into the bottom of the bumper.

Now I just need to cut a coil or two and it will look pretty good.


RE: S10 Air Dam - MFSuper90 - 02-16-2014

I kinda like it as well!


RE: S10 Air Dam - john - 03-18-2014

Americans Tongue


RE: S10 Air Dam - raysorenson - 03-18-2014

Europeans:
[Image: jq3hw7.jpg]


RE: S10 Air Dam - swampmonkey - 03-21-2014

that air-dam doesnt look to bad to be honest, the rims, do you have spacers on those?
Smile

and that ugly w210 is from Russia, kinda unfair to compare us europeans to Russians Tongue
especially after the last weeks of news regarding Ukraine Tongue


RE: S10 Air Dam - raysorenson - 03-21-2014

You're right. Low blow. At least I didn't go Japanese

[Image: your-guide-to-the-japanese-car-culture-54990_1.jpg]


RE: S10 Air Dam - MFSuper90 - 03-22-2014

Lmao, never paid attention to any Japanese cars.
But those, my friend, are hilarious!


RE: S10 Air Dam - Druk - 03-22-2014

Nice! And such an unobtrusive oil cooler. Dodgy


RE: S10 Air Dam - Tmadia - 03-23-2014

Yes, I used 6mm spacers front and rear.

I finally got my lift installed in my back yard and am swapping the tranny, which was flaring badly in 3rd and 4th.



(03-21-2014, 06:43 PM)swampmonkey that air-dam doesnt look to bad to be honest, the rims, do you have spacers on those?
Smile

and that ugly w210 is from Russia, kinda unfair to compare us europeans to Russians Tongue
especially after the last weeks of news regarding Ukraine Tongue



RE: S10 Air Dam - DeliveryValve - 03-23-2014

(03-23-2014, 11:19 AM)Tmadia Yes, I used 6mm spacers front and rear.

I finally got my lift installed in my back yard and am swapping the tranny, which was flaring badly in 3rd and 4th.


I need a lift in my back yard also! But how do you keep the weather elements and airborne dust off it?


RE: S10 Air Dam - Tmadia - 03-23-2014

(03-23-2014, 02:26 PM)DeliveryValve
(03-23-2014, 11:19 AM)Tmadia Yes, I used 6mm spacers front and rear.

I finally got my lift installed in my back yard and am swapping the tranny, which was flaring badly in 3rd and 4th.


I need a lift in my back yard also! But how do you keep the weather elements and airborne dust off it?

You don't. It will weather and not last as long as an indoor lift, but with the Chinese lifts being so cheap, $1600 delivered, I figured it would be worth it.

Even if it only last 5 years I feel it will be a very worthwhile investment.


RE: S10 Air Dam - JB3 - 03-24-2014

Looks pretty darn good! I wonder if an early dodge dakota air dam would work even better?

The are a little wider than the S10.


RE: S10 Air Dam - Purplecomputer - 03-25-2014

it that a bmw 2002 trunk lid i see in the background???


RE: S10 Air Dam - willbhere4u - 03-25-2014

If I had an old Corona or Celica beater I would do this in a heart beat with star exhaust along with chop the top off


RE: S10 Air Dam - Tmadia - 03-25-2014

(03-25-2014, 12:07 PM)Purplecomputer it that a bmw 2002 trunk lid i see in the background???

Good eye! It is indeed. My '69 2002 is my daily.