+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: turbo oil feed (/showthread.php?tid=5829)
turbo oil feed - bjarni97 - 09-07-2014
When you guys turbo a non turbo om 603. Where do you get a clean oil feed.
Is the oil at the oil pressure sensor pre filter or post filter.
RE: turbo oil feed - baldur - 09-07-2014
There's a port on the back of the cylinder head that takes a banjo bolt, 18x1.5mm if I recall correctly.
You can also fit a tee inline with the oil pressure switch on the oil filter housing.
RE: turbo oil feed - Max - 09-07-2014
Om60- 1/ 2 / 3 have a Port at the back of the Cylinderhead.
Size is M10 x 1
I use it for Oiltemperature at my Turbo-OM602
RE: turbo oil feed - bjarni97 - 09-09-2014
Thank you.
