+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Other (https://www.superturbodiesel.com/std/forumdisplay.php?fid=19)
+--- Forum: Projects (https://www.superturbodiesel.com/std/forumdisplay.php?fid=14)
+--- Thread: OM606 in a F250 (/showthread.php?tid=5862)
OM606 in a F250 - maxypriest - 09-24-2014
[url=http://www.youtube.com/watch?v=vMHZRw78XZ0]
My good freind Luke Dale in the UK has put a OM606 in a F250 – progress so far.
Personally I think this is the absolute dogs bollocks.
Max
RE: OM606 in a F250 - Hario' - 09-24-2014
sweet, which 722 controller is he using?
RE: OM606 in a F250 - Gforce - 09-24-2014
from olefeyer here on the forum
RE: OM606 in a F250 - Grecy - 09-24-2014
Very, very cool.
29 mpg (I assume UK gallons) is around 24-25 US mpg, or ~10L/100km.
Impressive for such a big pcikup.
-Dan
RE: OM606 in a F250 - buzzboy - 09-24-2014
It's surprising to see an LHD F250 in the UK. Fantastic swap though. I'd probably put a longer shifter on there, but it looks like a great truck.
RE: OM606 in a F250 - diesel2fast4u - 09-25-2014
coolest F250 I have seen
RE: OM606 in a F250 - mo1971fordcrew - 09-25-2014
Wow, that's bad azz!
RE: OM606 in a F250 - Duncansport - 09-26-2014
Very cool project! Looks to be well done too.
Though whats with the shifting/acceleration runs from outside the car? Something doesnt seem right there.. More tuning for the .6 controller?
RE: OM606 in a F250 - Edian727 - 09-26-2014
How well does that tow? It is very cool.
RE: OM606 in a F250 - Simpler=Better - 09-26-2014
(09-24-2014, 04:41 PM)Grecy Very, very cool.
29 mpg (I assume UK gallons) is around 24-25 US mpg, or ~10L/100km.
Impressive for such a big pcikup.
-Dan
This is what I get with a 3600# 2.5L N/A gasser
RE: OM606 in a F250 - pryantcc - 09-30-2014
Very nice!
RE: OM606 in a F250 - Mark_M - 10-05-2014
Nice truck
How does he get that past uk emission tests?
RE: OM606 in a F250 - Tito - 10-05-2014
Blocking rack travel with the stop lever. I've you're using a dieselmeken pump it's just turning the screws. Then take it for a drive full load and max rpm and that'll clean the exhaust. This always worked for me.
RE: OM606 in a F250 - EDH_Performance - 10-09-2014
Very nice truck! Have he had it on the dyno?
I don`t think that hx35 will produce 500hp as the hx40 is empty at around 450hp @ 3 bars..
This would be a killer with a compound setup!