+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: Exhaust Flanges for 603 motor (/showthread.php?tid=5905)
Exhaust Flanges for 603 motor - TurboTim - 10-08-2014
Does anyone know where to get exhaust manifold Flanges for a 603 engine? Looking to build a new turbo manifold.
RE: Exhaust Flanges for 603 motor - Simpler=Better - 10-08-2014
What's your timeframe? I can probably get some made up in a couple weeks if there is interest
RE: Exhaust Flanges for 603 motor - TurboTim - 10-08-2014
Yeah much more then a couple of weeks and I may get impatent. I can have my normal guy make them but he can only do 1/4 inch at this point.
RE: Exhaust Flanges for 603 motor - raysorenson - 10-08-2014
I'm interested. I've got a 602 and a 603 I'd like to build headers for. How thick?
RE: Exhaust Flanges for 603 motor - RustyLugNut - 10-08-2014
I can provide the required flanges if you can send me accurate profiles of the gasket area. I can mill up to 5/8 inch in thickness if needed.
Rusty
RE: Exhaust Flanges for 603 motor - TurboTim - 10-09-2014
Would an exhaust manifold gasket work? What kinda cost and time are you thinking?
RE: Exhaust Flanges for 603 motor - RustyLugNut - 10-09-2014
(10-09-2014, 07:07 AM)TurboTim Would an exhaust manifold gasket work? What kinda cost and time are you thinking?
6 cylinder flanges cost about 150 USD (Cummins). It would take roughly a week to slip it into the work flow and ship it out. If we could get several pieces made, it would reduce the individual costs somewhat.
A manifold gasket would be ideal.
Rusty
RE: Exhaust Flanges for 603 motor - TurboTim - 10-09-2014
Lets do it. What do you need from me? Can I get your number?
RE: Exhaust Flanges for 603 motor - raysorenson - 10-09-2014
And I need 1 for a 602 and one for a 603. 5 cyl discount? =).
I see other OM603 flanges use a 40.5mm port diameter.
RE: Exhaust Flanges for 603 motor - raysorenson - 10-09-2014
You can get flanges from Sweden for 450 Krona. ~65 USD. Shipping might suck. You want to go in on a buy TurboTim? Anyone else?
http://shop.klracing.se/sv/artiklar/flansar-och-packningar/topplocksflans-10-mm/mercedes-300d-12v-hel-10mm.html
RE: Exhaust Flanges for 603 motor - Duncansport - 10-10-2014
(10-09-2014, 03:34 PM)raysorenson You can get flanges from Sweden for 450 Krona. ~65 USD. Shipping might suck. You want to go in on a buy TurboTim? Anyone else?
http://shop.klracing.se/sv/artiklar/flansar-och-packningar/topplocksflans-10-mm/mercedes-300d-12v-hel-10mm.html
+1 on this, ive bought two OM605 flanges from them. Part was at my shop in about 1 week.
RE: Exhaust Flanges for 603 motor - RustyLugNut - 10-10-2014
(10-09-2014, 12:58 PM)TurboTim Lets do it. What do you need from me? Can I get your number?
I'll send you a PM with contact information.
Raysorenson. If you want to get in on this, we can oblige the 5 cylinder 602.
Price is dependent on specifications of course. If you just want the 9-10 mm flange, that does reduce the costs.
Rusty.
RE: Exhaust Flanges for 603 motor - raysorenson - 10-11-2014
I'm going to see how it pans out with KL racing. Thank you and simpler for the offer to make these.
RE: Exhaust Flanges for 603 motor - mbz123 - 10-16-2014
(10-10-2014, 07:42 AM)Duncansport +1 on this, ive bought two OM605 flanges from them. Part was at my shop in about 1 week.
Mind commenting on the actual shipping charges? Looking for a total to your doorstep.
(10-10-2014, 10:17 AM)RustyLugNut Price is dependent on specifications of course. If you just want the 9-10 mm flange, that does reduce the costs.
Rusty.
I'd be in for a couple 603 flanges. If we can get enough momentum here, it would best the alternatives mentioned + s&h. Care to break down some price points for us?
10mm mild steel @ X(qty)=$Y
Not sure if thicker is necessary, is it? Different material? A sub hundred dollar piece would ROCK
Have a gasket to contribute to the cause, too.
MBZ123
RE: Exhaust Flanges for 603 motor - Duncansport - 10-16-2014
(10-16-2014, 04:00 AM)mbz123(10-10-2014, 07:42 AM)Duncansport +1 on this, ive bought two OM605 flanges from them. Part was at my shop in about 1 week.
Mind commenting on the actual shipping charges? Looking for a total to your doorstep.
(10-10-2014, 10:17 AM)RustyLugNut Price is dependent on specifications of course. If you just want the 9-10 mm flange, that does reduce the costs.
Rusty.
I'd be in for a couple 603 flanges. If we can get enough momentum here, it would best the alternatives mentioned + s&h. Care to break down some price points for us?
10mm mild steel @ X(qty)=$Y
Not sure if thicker is necessary, is it? Different material? A sub hundred dollar piece would ROCK
Have a gasket to contribute to the cause, too.
MBZ123
$154.00 shipped to my shop
RE: Exhaust Flanges for 603 motor - mbz123 - 10-17-2014
(10-16-2014, 07:24 AM)Duncansport(10-16-2014, 04:00 AM)mbz123(10-10-2014, 07:42 AM)Duncansport +1 on this, ive bought two OM605 flanges from them. Part was at my shop in about 1 week.
Mind commenting on the actual shipping charges? Looking for a total to your doorstep.
(10-10-2014, 10:17 AM)RustyLugNut Price is dependent on specifications of course. If you just want the 9-10 mm flange, that does reduce the costs.
Rusty.
I'd be in for a couple 603 flanges. If we can get enough momentum here, it would best the alternatives mentioned + s&h. Care to break down some price points for us?
10mm mild steel @ X(qty)=$Y
Not sure if thicker is necessary, is it? Different material? A sub hundred dollar piece would ROCK
Have a gasket to contribute to the cause, too.
MBZ123
$154.00 shipped to my shop
TY
I'm thinking quanities could be belted out once/twice a year and offered at almost half that amount. Just what a diy'er on the cheap needs.
MBZ123
RE: Exhaust Flanges for 603 motor - Duncansport - 10-17-2014
i think most will need 2-3 flanges when attempting their own header/manifolds
RE: Exhaust Flanges for 603 motor - raysorenson - 10-17-2014
(10-17-2014, 11:38 AM)Duncansport i think most will need 2-3 flanges when attempting their own header/manifolds
Haha. That's the last part you weld too. After pricing all the stuff and considering the time involved, Fred's headers are starting to look reasonably priced.
RE: Exhaust Flanges for 603 motor - yatzee - 10-17-2014
I'd be in for a flange for an om606 also
RE: Exhaust Flanges for 603 motor - RustyLugNut - 10-21-2014
(10-17-2014, 10:50 AM)mbz123(10-16-2014, 07:24 AM)Duncansport(10-16-2014, 04:00 AM)mbz123 Mind commenting on the actual shipping charges? Looking for a total to your doorstep.
I'd be in for a couple 603 flanges. If we can get enough momentum here, it would best the alternatives mentioned + s&h. Care to break down some price points for us?
10mm mild steel @ X(qty)=$Y
Not sure if thicker is necessary, is it? Different material? A sub hundred dollar piece would ROCK
Have a gasket to contribute to the cause, too.
MBZ123
$154.00 shipped to my shop
TY
I'm thinking quanities could be belted out once/twice a year and offered at almost half that amount. Just what a diy'er on the cheap needs.
MBZ123
I think this is a good idea. I will look into a 3/8 inch flange in mild steel and a batch run. That should bring the prices down under 100 USD for forum members. I will do the 603 engine first as there seems to be more interest at this time. I will look into other engines as we move forward.
Rusty
RE: Exhaust Flanges for 603 motor - TurboTim - 10-21-2014
I got a 606 gasket and the 603 gasket should be here today and I will send them off to you right away.
RE: Exhaust Flanges for 603 motor - F.R.A.S - 10-21-2014
Here...
http://www.superturbodiesel.com/std/Thread-Bolt-patterns-flanges-mounts-etc
...you have the om606 flange posted by me. Also fits 605 and 604.
Missed a couple of numbers while doing it, but that's commented on and I wrote it in a post further down.