+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: Om605 pump on om602 (/showthread.php?tid=6223)
Om605 pump on om602 - k2igukast - 02-10-2015
Is it possible to install an om605 turbo fuel pump on a om602? I am aware, that its fuel flow is partially controlled electronically. Should I install it together with the electrical parts?
RE: Om605 pump on om602 - baldur - 02-10-2015
Yes if you have all the electronics to control it, it will drop right in. Note that the 605 has an engine speed sensor on the flywheel which you must fit or duplicate.
RE: Om605 pump on om602 - k2igukast - 03-02-2015
What hp expected full loaded om605 pump on om602? I dont need ECU, right?
RE: Om605 pump on om602 - barrote - 03-02-2015
funny , how do u imagine to control a EDC pump without a ECU
RE: Om605 pump on om602 - k2igukast - 03-03-2015
Oh fuck, my bad.
RE: Om605 pump on om602 - baldur - 03-03-2015
(03-02-2015, 04:07 PM)barrote funny , how do u imagine to control a EDC pump without a ECU
Easy, just rig up a throttle lever to the rack. It won't be possible to idle but it'll drive fine otherwise.
RE: Om605 pump on om602 - Petar - 03-03-2015
(03-03-2015, 02:57 PM)baldur(03-02-2015, 04:07 PM)barrote funny , how do u imagine to control a EDC pump without a ECU
Easy, just rig up a throttle lever to the rack. It won't be possible to idle but it'll drive fine otherwise.
No rev limiter either lol
Seriously take the pump from your 602 engine and the 605 pump and have a shop swap the elements and adjust the pump.
RE: Om605 pump on om602 - barrote - 03-03-2015
(03-03-2015, 03:21 PM)Petar(03-03-2015, 02:57 PM)baldur(03-02-2015, 04:07 PM)barrote funny , how do u imagine to control a EDC pump without a ECU
Easy, just rig up a throttle lever to the rack. It won't be possible to idle but it'll drive fine otherwise.
No rev limiter either lol
Seriously take the pump from your 602 engine and the 605 pump and have a shop swap the elements and adjust the pump.
very nice idea u boys gave me, next saturday i will hook a string pushing the rack forward, and conected to the full pedal.
i´ll cal it the "afterburner"
good luck though.