My STD engine. 250-300hp 603, $3.5k - Printable Version +- STD (https://www.superturbodiesel.com/std) +-- Forum: Other (https://www.superturbodiesel.com/std/forumdisplay.php?fid=19) +--- Forum: FS / WTB / Buying guides (https://www.superturbodiesel.com/std/forumdisplay.php?fid=8) +--- Thread: My STD engine. 250-300hp 603, $3.5k (/showthread.php?tid=6384) |
My STD engine. 250-300hp 603, $3.5k - winmutt - 03-27-2015 Engine is still in car. Moving into 606 realm and need to fund my sickness. #14 head runs 80C year round, I have seen it up to 90C at 3rd gear WOT ~18psi doing some hill climbing in the appalachians. I've been runnign this car as my DD now for almost 3years, it is solid as a rock (no chevy jokes). One of the cylinders is a bit low on compression, it runs a little rough in winter until it warms up before I get to the end of the driveway. We saw single digits this winter and last and it always starts on first glow. IP is a Diesel Mekken 125cc pump with normal ALDA adjustment, the ALDA not only controls smoke but max HP. Euro manifold with HX30W. Will consider some offers but the pump is worth $1500 alone. Intake manifold is modified to take 3" intercooler piping from the drivers side. This was made for a manual trans, I have no idea what it would take to get it working with an automatic again. RE: My STD engine. 250-300hp 603, $3.5k - yatzee - 04-16-2015 strangely temping to just directly swap this into my W126... would you consider an om606 as a partial trade? RE: My STD engine. 250-300hp 603, $3.5k - winmutt - 04-16-2015 Turbo? RE: My STD engine. 250-300hp 603, $3.5k - yatzee - 04-16-2015 yup. Made this post a few days ago about it: http://www.superturbodiesel.com/std/showthread.php?tid=6443 RE: My STD engine. 250-300hp 603, $3.5k - winmutt - 04-19-2015 Yes but that is very far away etc. |