+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: Should I put HX40 and 7.5mm for everyday use? (/showthread.php?tid=6622)
Should I put HX40 and 7.5mm for everyday use? - deviance - 07-09-2015
Hey guys!
My engine is now om606 7mm and KKK K27 It spool about 3500-4000 with only 1.3 bar (no smoke after that).
Should i put HX40 and 7.5mm for everyday use or that's too big for it? 4000+ spool?
Thank You!
RE: Should I put HX40 and 7.5mm for everyday use? - TurboTim - 07-09-2015
Powerband will be 4500 and up. The power will be good but it is a compromise of losing low end. I have a 300SDL and pull a trailer a lot and I am having to rev the hell out of it to get any usable power going up hills or I am just rolling coal.
RE: Should I put HX40 and 7.5mm for everyday use? - deviance - 07-10-2015
maybe hard to overtake cars?
RE: Should I put HX40 and 7.5mm for everyday use? - erx - 07-10-2015
I have om606 with 7,5mm diselmeken pump and hx40 with 16 housing. For everyday use it's not perfect but it's driveable. I have 1 bar boost at 3000rpm and 3bar at 4000rpm, it comes alive from 3500rpm. For everyday use I recommend smaller turbo because you really have to let rpm up to make it pull.
RE: Should I put HX40 and 7.5mm for everyday use? - Booster - 07-10-2015
(07-10-2015, 06:21 AM)deviance maybe hard to overtake cars?
Not If your in the right Gear
RE: Should I put HX40 and 7.5mm for everyday use? - deviance - 07-13-2015
Thanks for the answers!
@erx: What manifold do you have?