+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Body Mods (https://www.superturbodiesel.com/std/forumdisplay.php?fid=21)
+--- Thread: Skid Plate (/showthread.php?tid=671)
Skid Plate - garage - 09-11-2009
Is there any sources for skid plates for our cars?
OEM? Aftermarket?
Im sure its possible to fab one up from sctrach, but before that point?
Look at this skidplate http://www.youtube.com/watch?v=RMA5cQwn3nI
I know its a gasser and its Carlsson.
But that skid looks sweet.
RE: Skid Plate - aaa - 09-11-2009
There's a factory skid plate, I see one every once in a blue moon at the JY.
RE: Skid Plate - garage - 09-11-2009
Really now?!
Thats good news.
Does anyone have some photos? Or somwhere where you can order a replacement?
Was it on a w123?or what?
RE: Skid Plate - ForcedInduction - 09-11-2009
Yes, every W123 has the bolt holes for the factory skid plate.
RE: Skid Plate - garage - 09-11-2009
(09-11-2009, 08:05 PM)ForcedInduction Yes, every W123 has the bolt holes for the factory skid plate. When I get home tonight i'll post pictures.
Thatd be great forced!
Any pics of the actual skid plate somwhere?
RE: Skid Plate - ForcedInduction - 09-11-2009
I have pictures of one somebody installed.
If you call the Classic Center they may be able to find one.
RE: Skid Plate - garage - 09-11-2009
(09-11-2009, 09:57 PM)ForcedInduction I have pictures of one somebody installed.
If you call the Classic Center they may be able to find one.
Forced, i would love drooling over some pics, if you wouldnt mind posting them? por favor?
What is the Classic Center wich you speak of?
RE: Skid Plate - ForcedInduction - 09-11-2009
http://www.mbusa.com/mercedes/#/servPrtsOverview/
RE: Skid Plate - garage - 09-12-2009
Soo i tried looking around for one on the web, but cant really seem to find any pics. Id be be thankful to see one, and mayybe start buying a gallon of diesel with every fill up
RE: Skid Plate - garage - 09-18-2009
So forced how bout them pictures man?
Any chance?
RE: Skid Plate - DeliveryValve - 09-18-2009
Here are some links to pictures of the skid plate
http://www.peachparts.com/shopforum/showthread.php?t=160706
http://www.peachparts.com/shopforum/showthread.php?t=226796
RE: Skid Plate - kamel - 09-19-2009
Sure wish I had one when last time I was jumpin.
RE: Skid Plate - garage - 09-19-2009
(09-18-2009, 05:30 PM)DeliveryValve Here are some links to pictures of the skid plate
http://www.peachparts.com/shopforum/showthread.php?t=160706
http://www.peachparts.com/shopforum/showthread.php?t=226796
Thanks Delivery, now that i know what im looking for, i jus needa keep an eye out.
(09-19-2009, 12:32 AM)kamel Sure wish I had one when last time I was jumpin.
Kamel! So whats the deal man, do you rallyX that w123 machine of yours or what?
I read your in SoCalish area? Im in the same area.
I would love to get involved in rally with my car man!
RE: Skid Plate - ElsBenz - 10-26-2009
http://www.worldimpex.com/parts/mercedes-benz-protection-p_693945.html
Try this out.
It refences the part # in the skid plate post.
RE: Skid Plate - winmutt - 10-27-2009
If that is the right part that is a good enough price where I might get one.
RE: Skid Plate - SurfRodder - 10-27-2009
(10-27-2009, 08:29 AM)winmutt If that is the right part that is a good enough price where I might get one.
The price is good, but unless youre close enough to their shop (looks like MD) youre gonna have to pay ~60 bux to ship, min...
RE: Skid Plate - ElsBenz - 11-03-2009
I ordered 2 of them to ship to Wisconsin and the shipping was only $11.00.
They came in and they are the correct Mercedes OEM skid plate.
RE: Skid Plate - winmutt - 11-03-2009
OOoOOOOoOOOoOOOO
Christmas list check!
RE: Skid Plate - DeliveryValve - 11-03-2009
(11-03-2009, 08:00 AM)ElsBenz I ordered 2 of them to ship to Wisconsin and the shipping was only $11.00.
....
I got a quote of 60 bucks to go to California a couple of weeks ago.
RE: Skid Plate - ForcedInduction - 11-03-2009
(11-03-2009, 04:44 PM)DeliveryValve I got a quote of 60 bucks to go to California a couple of weeks ago.
Thats probably because California is a lot further from Maryland than Wisconsin.
RE: Skid Plate - DeliveryValve - 11-03-2009
(11-03-2009, 04:52 PM)ForcedInduction ...
Thats probably because California is a lot further from Maryland than Wisconsin.
You don't say!
In any event it is still a good deal for added protection. Only if they offered the radiator protector cheap.
.
RE: Skid Plate - ForcedInduction - 04-08-2010
My $5 find. I'll install it on the 240 along with a new lower pan on the next oil change.
It looks runny because I steamed it and covered it with rubberized undercoating.
RE: Skid Plate - aaa - 04-08-2010
Where's the rear half?
RE: Skid Plate - ForcedInduction - 04-08-2010
There is no other part.
RE: Skid Plate - aaa - 04-08-2010
Mine has two pieces to it. Maybe I should photograph it... it isn't all nice and steamed looking though.
RE: Skid Plate - JB3 - 04-08-2010
what a stroke of luck, nice find! Can you take a profile picture of it for those of us who might try and make one based on these pics?
the nice thing about the skid plate in the initial video is that it also protects the radiator mount, unlike the factory skid plate which looks like it only protects the oil pan. My radiator was cracked from just such an impact right under the bumper, I wonder if your can just add to the factory plate going forwards to provide the protection?
heres a pic of the damage that destroyed my radiator, notice how all it really did was deform that support between the two radiator grommets, but it was enough the stress the plastic bottom and cause it the leak at the stress points.
RE: Skid Plate - ForcedInduction - 04-15-2010
Interesting. That would explain the nutserts on the front of the pan but there was no second part on the vehicle I removed this from. Please post a picture of that front pan, I've never seen anything but the single main pan installed.
RE: Skid Plate - Sour Diesel - 04-18-2010
I would just build one, or have a local fab shop do it for you.
Use the factory mounting points. But make sure you attach it to the bumper bolts. Do this any way you have to. In the video the car had a piece of square stock connecting the two bumper brackets.
You notice that the skid plate is molded for strength. Use at least 3/16 aluminum.
Think about a rear diff cover and something for the rear control arms, ect.
I would study up on how to fab a prerunner or a rally racer.
Try driving on some forest roads with your diesel like that rally car. You might find out that your car has all the power it needs!
BTW any one broke a w123 control arm off yet. Looks weak, like it would tear out of the body of you hit a ditch or small rocks? Any ideas on this.
RE: Skid Plate - JB3 - 04-18-2010
tore a tie rod off, have never heard of anyone having any issues with the lower control arm, unless of course you were jumping.
The tie rod is way more exposed, and can hook rocks or curbs as I discovered.
Altogether though, the suspension is pretty robust, and fairly high off the ground, what with all of these things in service as taxis still.
RE: Skid Plate - garage - 04-18-2010
(04-18-2010, 11:09 AM)Sour Diesel I would just build one, or have a local fab shop do it for you.
Use the factory mounting points. But make sure you attach it to the bumper bolts. Do this any way you have to. In the video the car had a piece of square stock connecting the two bumper brackets.
You notice that the skid plate is molded for strength. Use at least 3/16 aluminum.
Think about a rear diff cover and something for the rear control arms, ect.
I would study up on how to fab a prerunner or a rally racer.
Try driving on some forest roads with your diesel like that rally car. You might find out that your car has all the power it needs!
BTW any one broke a w123 control arm off yet. Looks weak, like it would tear out of the body of you hit a ditch or small rocks? Any ideas on this.
Actually ive just been looking into getting one fabbed up for the 240D just purchased, one that protects the oil pan using factory placement, and connecting up to the radiator and on through to protect the bottom of the bumper, like the video hopefully.
I always catch myself reading up on prerunner fabrication, and looking at how to apply different aspects to these cars for better "performance".
Today was my 2nd time out running my benz in some dirtroads, today was actually pretty ballsy out there, some pretty ruff stuff.
and this car soaked up everything i gave it.
Im actually really interested in finding a rallyX event to compete in.
Is that a carbon fiber hood?
Or is it just painted black?
RE: Skid Plate - ForcedInduction - 05-25-2010
Is this what you're talking about?
RE: Skid Plate - GREASY_BEAST - 05-28-2010
This is the full factory skid plate
![[Image: Skid1.jpg]](http://i301.photobucket.com/albums/nn62/greasy300tdturbo/Skid1.jpg)