+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Other (https://www.superturbodiesel.com/std/forumdisplay.php?fid=19)
+--- Forum: FS / WTB / Buying guides (https://www.superturbodiesel.com/std/forumdisplay.php?fid=8)
+--- Thread: 6 speed manual trans x2 (/showthread.php?tid=6749)
6 speed manual trans x2 - Dieselsec - 09-18-2015
I have 2 6 speed manual boxes one from a w203 220cdi and the other from a 230 kompressor w210.
The w203 box is perfect and is currently behind my 606 superturbo.
The w210 box I had behind the 606 superturbo but it was hard to get 2nd when changing down so I swapped in the w203 box.
I've now decided to go to automatic trans so no longer have use for these.
Comes with gear shifter mechanisms x2 and flywheel and clutch (the dual mass set up) x1.
Incidentally, the box from the w203 is a bit bigger and longer than the w210 box. I presume because it has beefier internals. Both fit the om606 bellhousing though.
Located in Ireland but I will put on pallet and ship through Europe.
Anyone interested in these?
RE: 6 speed manual trans x2 - barrote - 09-18-2015
that will depend on price... the gasser forguet it is small cause has week internals , but the diesel one what part number has
716. what
may be interested...
RE: 6 speed manual trans x2 - Dieselsec - 09-19-2015
I'll have a look at it when I take the box out. Where is the part number stamped on these?
RE: 6 speed manual trans x2 - barrote - 09-19-2015
god question , is printed in the side , somewhere but is printed .