+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: Thoughts about om605 with om602 2,9 crank (/showthread.php?tid=6873)
Thoughts about om605 with om602 2,9 crank - EvoPeter - 11-12-2015
Whats your thoughts about stroking a om605 with a crank from a om602 2,9?
I read somewhere that it would make it a 2,7L.
Good or Bad?
RE: Thoughts about om605 with om602 2,9 crank - barrote - 11-12-2015
Hy ,
i´m doing a similar thing,
it does work , however u need diff tipe rod, the piston stick out 2.5 mm , is too much and then u have to balange the set ...
but it does not give u 2.7lts, the 2.9 crank is 91.3mm stroke .