STD
om606 w123 project - Printable Version

+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Other (https://www.superturbodiesel.com/std/forumdisplay.php?fid=19)
+--- Forum: Projects (https://www.superturbodiesel.com/std/forumdisplay.php?fid=14)
+--- Thread: om606 w123 project (/showthread.php?tid=6980)

om606 w123 project - brianom606 - 01-14-2016

[Image: 20160114_164351_zpsxgjldyt1.jpg]

RE: om606 w123 project - brianom606 - 01-14-2016

[Image: 20160114_164445_zpsinsh5ueq.jpg]

RE: om606 w123 project - brianom606 - 01-14-2016

[Image: 20160114_164413_zpsydpl1n2h.jpg]

RE: om606 w123 project - brianom606 - 01-14-2016

[Image: 20160114_164424_zpspkiixesv.jpg]

RE: om606 w123 project - brianom606 - 01-14-2016

I also licked up a 1999 e300td with 120k miles on the engine

[Image: FB_IMG_1452812465892_zpsw1zwrmla.jpg]

RE: om606 w123 project - brianom606 - 01-14-2016

The plan is to fit the engine with eletronic ip from the 606 with a chipped ecu and a bigger turbo also plan on useing the auto gearbox with a controller of some sort

RE: om606 w123 project - SurfRodder - 01-16-2016

For engine control check out this:
http://www.superturbodiesel.com/std/showthread.php?tid=6975

and tranny:
http://www.superturbodiesel.com/std/showthread.php?tid=3701

both of these should help out with wiring and control significantly...

I think the w126 OM603 mounts should also work nicely for this conversion. I have a set I got a few years back (new) on ebay when I was considering installing a 603 in my w123. I have not yet attempted that project, but I have heard the engine mount points on w123 and w126 are really close, something like 1/2" plate spacer close. I'll look thru my old notes to see if I have part numbers available.

edit:
Left bracket: 6032230604
http://www.ebay.com/itm/Mercedes-Benz-OM603-W126-Engine-Support-Bracket-LEFT-6032230604-/201408120615?hash=item2ee4dc0727:g:qa0AAOSwu4BVzvJ3&vxp=mtr#ht_386wt_955
right bracket: 6032230704
http://www.ebay.com/itm/Mercedes-Benz-OM603-W126-Engine-Support-Bracket-RIGHT-6032230704-/201408123273?hash=item2ee4dc1189:g:3CUAAOSw9N1VzvWP&vxp=mtr#ht_454wt_955

RE: om606 w123 project - soltysrsz - 01-17-2016

If you want use om603 w126 motor mount you need to made this spacer :

https://goo.gl/photos/PwfynkRQdnRiDfps8
https://goo.gl/photos/dJwYynemGEVmvDfS7

I have enough clearance to mount original fan Wink, you can move engine more to back, but you need to cut oil pan:

https://goo.gl/photos/27SEXVgihzcJLBGXA

RE: om606 w123 project - brianom606 - 01-17-2016

(01-16-2016, 11:47 PM)SurfRodder For engine control check out this:
http://www.superturbodiesel.com/std/showthread.php?tid=6975

and tranny:
http://www.superturbodiesel.com/std/showthread.php?tid=3701

both of these should help out with wiring and control significantly...

I think the w126 OM603 mounts should also work nicely for this conversion.  I have a set I got a few years back (new) on ebay when I was considering installing a 603 in my w123.  I have not yet attempted that project, but I have heard the engine mount points on w123 and w126 are really close, something like 1/2" plate spacer close.  I'll look thru my old notes to see if I have part numbers available.

edit:
Left bracket: 6032230604
http://www.ebay.com/itm/Mercedes-Benz-OM603-W126-Engine-Support-Bracket-LEFT-6032230604-/201408120615?hash=item2ee4dc0727:g:qa0AAOSwu4BVzvJ3&vxp=mtr#ht_386wt_955
right bracket: 6032230704
http://www.ebay.com/itm/Mercedes-Benz-OM603-W126-Engine-Support-Bracket-RIGHT-6032230704-/201408123273?hash=item2ee4dc1189:g:3CUAAOSw9N1VzvWP&vxp=mtr#ht_454wt_955


Thank you that helps alot i was not sure weather it was petrol or diesel mounts i needed go use .... 
Im going to  be testing a ecu with a chip a lad here in ireland made to run the engine ... and i will have to buy a gearbox controller or get a c220 cdi 6 speed

RE: om606 w123 project - brianom606 - 01-17-2016

(01-17-2016, 02:18 AM)soltysrsz If you want use om603 w126 motor mount you need to made this spacer :

https://goo.gl/photos/PwfynkRQdnRiDfps8
https://goo.gl/photos/dJwYynemGEVmvDfS7

I have enough clearance to mount original fan Wink, you can move engine more to back, but you need to cut oil pan:

https://goo.gl/photos/27SEXVgihzcJLBGXA

Have u any pictures of your conversion ?

RE: om606 w123 project - soltysrsz - 01-17-2016

here you got my pictures:
https://photos.google.com/share/AF1QipNgUSawVXxQmiy4cIuie6soSRPrINgq7Rp33jNfyBCdRs9olmAPMxpzQKubvhY2Og?key=Ulh0RHd1X0Z3eVpzNVFkOURlbEgwa0RyZFRsc1VB

RE: om606 w123 project - brianom606 - 01-17-2016

Cool alot of work in them