+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Drivetrain (https://www.superturbodiesel.com/std/forumdisplay.php?fid=9)
+--- Thread: 722.6 driveshaft flange size. (/showthread.php?tid=7100)
722.6 driveshaft flange size. - -Mackan- - 03-16-2016
Hello.
Im installing a 722.6 gearbox in my s124.
But the flange on the 722.6 is to big in diameter.
I read that there are 3 different size flanges for the 722.6?
90, 100 & 110mm.
Wich car came with the 90mm one?
RE: 722.6 driveshaft flange size. - whipplem104 - 03-16-2016
You can find 90mm ones on some c classes. I think slk as well. I would look it up in the EPC, probably more cars out there. Small engine stuff like a c220 or c230.
RE: 722.6 driveshaft flange size. - -Mackan- - 03-17-2016
(03-16-2016, 10:35 PM)whipplem104 You can find 90mm ones on some c classes. I think slk as well. I would look it up in the EPC, probably more cars out there. Small engine stuff like a c220 or c230.
Thx for your reply!
I dont have EPC available
I think the w203 220cdi has the 100mm.
Any one mind looking in to the epc to check for the 90mm one?
Maby the 99-00 year w202 220cdi?
RE: 722.6 driveshaft flange size. - -Mackan- - 03-19-2016
Well i solwed my problem by using the forward part of the driveshaft from a w124 TDT. That allowed me to use a 110mm kardan and that fits the 722.6 from 320cdi