+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: Ignition switch with vacuum switch into w202 (/showthread.php?tid=7580)
Ignition switch with vacuum switch into w202 - addi.bigg - 01-17-2017
Fellas,
I'm keep searching but couldn't find a reliable source for ignition switch that contains vacuum switch, and bolt-on into a w202 c250TD (no immobiliser).
I've heard here that 2.0D 55kw is bolt-on but I couldn't find one here.
Anyone could make a comparison of W124/W190 2.0D ignition switch vs. w202 2.5TD, so I could have a proof whether I can buy confidently any of those with 2.0D
Thanks!
Ádám
RE: Ignition switch with vacuum switch into w202 - Petar - 01-17-2017
You don't need it, use a vacuum solenoid wired into the ignition to shut down the engine. Worked reliably for me for years on my W123 (It was gas engined before, and I was too lazy to swap the ignition switch)
RE: Ignition switch with vacuum switch into w202 - maxypriest - 01-18-2017
I have the same set up as Petar - works perfectly.
RE: Ignition switch with vacuum switch into w202 - Sultzi - 01-21-2017
Did same thing than Petar (also in 123 old gasoline converted to om606). Just took one solenoid from 124 and used that to kill the engine, simple and works like a glove.