+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: 606 valve stem seals (/showthread.php?tid=7592)
606 valve stem seals - polarisrmk - 01-23-2017
99 606 turbo does anyone know if the intake and exhaust valves stem seals are different or the same? I am getting mixed information some places say they are different but The epc says they are all the same seal. I would get factory ones but would cost $300 just for valve stem seals.
RE: 606 valve stem seals - barrote - 01-24-2017
They are the same. 6mm seal for a 10mm seat. U can use any in the us market that has that rating.
RE: 606 valve stem seals - polarisrmk - 01-24-2017
(01-24-2017, 06:30 AM)barrote They are the same. 6mm seal for a 10mm seat. U can use any in the us market that has that rating.
THANKS!
RE: 606 valve stem seals - AlanMcR - 01-24-2017
Some of the early NA models had different size valve stems (intake vs. exhaust). On the turbo, they made the stems all the same size.
RE: 606 valve stem seals - barrote - 01-25-2017
Right its 7mm intead of 6 . Good point.
Sorry .