+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: OM617 oil feed (/showthread.php?tid=7694)
OM617 oil feed - cjcosta - 04-11-2017
Can someone tell me the size of tread of turbo oil feed for OM617a (block side)
Best Regards,
Carlos
RE: OM617 oil feed - R-3350 - 04-15-2017
its an m14 by 1.5 banjo i believe. I replaced mine a while ago with a flex line to my new turbo. its around 40-48 inches from the stock fitting on the filter housing to the turbo FYI if you are going to use a flex line.