+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Other (https://www.superturbodiesel.com/std/forumdisplay.php?fid=19)
+--- Forum: FS / WTB / Buying guides (https://www.superturbodiesel.com/std/forumdisplay.php?fid=8)
+--- Thread: For Sale Feeler OM613 & 648 & stand alone (/showthread.php?tid=7698)
For Sale Feeler OM613 & 648 & stand alone - diesel2fast4u - 04-14-2017
Hi all,
Due to my company moving to another location I have no time whatsoever to finish a project I started for minimum 2 Years
That is why I decided to see if there is any interest for :
- 1 Complete OM613 6-inline CDI without starter engine
I bought this engine for 2400 euro, seller told me that it had 240.000 km, the standard turbo is dead.
The intake manifold from this engine has been cut down to make a custom air intake.
Block is bare right now on an engine stand but I have all the accessories
- 1 Complete OM648 6-inline CDI without starter engine
I bought this engine for 2200 euro, seller told me that it had 180.000 km, no turbo
The intake manifold from this engine has been cut down to make a custom air intake.
Block is bare right now on an engine stand but I have all the accessories
- 2 400CDI CP3 injection pumps, 800 euro
- 2 High pressure feed line from CDI 3.0 AMG to connect the CP3 to the fuel rail
- The injectors from the 613 have been upgraded with AMG nozzles, 360 euro
- 1 complete Stand alone Injection system with induction injector driver and wiring from skynam.com
complete with air temperature sender, coolant temp sender, USB interface cable for programming, Lambda sender and the injector driver program. I paid 4000 euro
So I have 9760 euro into this project.
I am open for serious offers but please no lowballers
Raf