Cheap digital oscilloscope. - Printable Version +- STD (https://www.superturbodiesel.com/std) +-- Forum: Other (https://www.superturbodiesel.com/std/forumdisplay.php?fid=19) +--- Forum: Open (https://www.superturbodiesel.com/std/forumdisplay.php?fid=13) +--- Thread: Cheap digital oscilloscope. (/showthread.php?tid=776) |
Cheap digital oscilloscope. - winmutt - 10-20-2009 I found this puppy for cheap : http://www.seeedstudio.com/depot/digital-storage-oscilloscope-with-panels-p-514.html $50 made by JYE tech. RE: Cheap digital oscilloscope. - E300TSC - 11-04-2009 Wow, that's nice! I've been thinking I should get something to diagnose and trace the various signals coming fromthe ECU onthe car... I ordered the kit from these people: www.nkcelectronics.com Same stuff and prices just not the $40 to ship that little thing from China! RE: Cheap digital oscilloscope. - winmutt - 11-05-2009 Premade? Got a direct link? RE: Cheap digital oscilloscope. - E300TSC - 11-05-2009 I bought the kit for $35 + $4 for shipping. Kit - http://www.nkcelectronics.com/digital-storage-oscilloscope-diy-kit.html Built - http://www.nkcelectronics.com/digital-storage-oscilloscope-very-low-cost.html RE: Cheap digital oscilloscope. - E300TSC - 11-09-2009 Someday... This pile of parts will be a complete oscilloscope... RE: Cheap digital oscilloscope. - 300SD81 - 11-09-2009 (11-09-2009, 08:33 PM)E300TSC Someday... haha, you have the FUN part already done for you! All the SMDs are pre-soldered... I'll solder that stuff together for free if anyone wants to pay shipping both ways, although if you want me to do it, get the one without the SMDs soldered.. RE: Cheap digital oscilloscope. - E300TSC - 11-12-2009 Well... Sad to say that as perfectly as I followed the Chinese instructions and as carefully as I placed and soldered every connection and every component, it will not boot up... There are several release notes but sometimes the language is like a double negative and it's hard to figure out what they're saying... I did notice that some of the components were getting kind of warm so maybe one of the capacitors that I was supposed to reverse got reversed twice. Bummer... RE: Cheap digital oscilloscope. - winmutt - 11-12-2009 Now you know why I wanted to buy it preassembled. U email tech support yet? RE: Cheap digital oscilloscope. - winmutt - 12-07-2009 I got mine in the mail this weekend. Rand duct tape around the sides to seal up the places where fingers might go and it works pretty good. The sensor input plug (RCA) is wiggly or something so it doesnt work 100% but when it does it certainly does the job. As I mentioned in the vnt controller thread, my arduino was outputting PWM at 7.1ms.. RE: Cheap digital oscilloscope. - E300TSC - 04-19-2010 Fixed mine. Improved the solder joints connecting the diaplay board to the main board and it's good to go now. RE: Cheap digital oscilloscope. - winmutt - 03-24-2011 Doubt this will be as cheap but god is it sexy! http://iteadstudio.com/copied/ds203-mini-dso-dso-quad-start-production-now/ RE: Cheap digital oscilloscope. - stan - 03-24-2011 you realize if you want a small cheap slow scope you could just get a dso nano and have it working on arrival |