+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: 606 Turbo flange gasket number (/showthread.php?tid=7911)
606 Turbo flange gasket number - Nick S - 11-19-2017
I've tried searching on the site but no luck. Could someone please give me the standard triangular turbo flange gasket number for a OM606. Hard to find in Australia as we did not get this motor here
Thanks
Nick
RE: 606 Turbo flange gasket number - barrote - 11-20-2017
Same as 605... don't know number... if in real problem use aluminium sheet gasket...
RE: 606 Turbo flange gasket number - Nick S - 11-20-2017
Thanks but I need the MB part number if possible
Nick
RE: 606 Turbo flange gasket number - Tobulus - 11-20-2017
From factory there is no gasket
RE: 606 Turbo flange gasket number - Mr.Emo - 11-20-2017
Yeah. I don't think there is a gasket there. :o
Just took mine apart only to find no gasket. I wad just as confused as you. But if you manage to find one please post it here.
If it's needed or not that is another question.
RE: 606 Turbo flange gasket number - Nick S - 11-20-2017
Thanks guys, seems strange that there is no gasket between the flange and turbo inlet
Nick
RE: 606 Turbo flange gasket number - AlanMcR - 11-20-2017
As stated above, the factory didn't use a gasket. Both of my OM606's leak a tiny amount of soot there. I have decided to ignore it. If you want a gasket, use a sheet of ductile copper. Copper has a thermal expansion coefficient that is closer to iron than aluminum.
RE: 606 Turbo flange gasket number - Nick S - 11-20-2017
Thanks again everyone - no gasket it is
Nick