+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: HELP! (/showthread.php?tid=8232)
HELP! - Om606STD - 05-03-2019
Hello
Can you please guide me to a good garage near Hamburg with experience in om606 superturbodiesle on my 1998 G class 300? I contacted Stern Garage but they seem busy.
Thanks a lot
RE: HELP! - AlanMcR - 05-03-2019
I'm definitely too far away for hands-on help. Perhaps you could explain what is needed?
Also, did this start out as a G300 w/ OM606a, or something else? I'm curious about what modifications were made.
RE: HELP! - Om606STD - 05-04-2019
(05-03-2019, 11:43 PM)AlanMcR I'm definitely too far away for hands-on help. Perhaps you could explain what is needed?hello
Also, did this start out as a G300 w/ OM606a, or something else? I'm curious about what modifications
Can you recommend a professional MB garage with experience in om606 superturbodiesle near Hamburg. I tried Stern Garage but they are busy. My car is 1998 G class 300 td, om606, 8mm myna pump, Garrett ec1 turbo. I want to do is the following at a professional garage not too far from Hamburg:
1. Install a new torque converter that I purchased
2. Optimize superturbodiesle tune (no ECU .. only mechanical)
3. Perform overall inspection and major service on the car
4. Install a few underbody protection parts I got from G-Raid.
Thank you