+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: OM613/OM648 (GT2359V) down pipe?? (/showthread.php?tid=8267)
OM613/OM648 (GT2359V) down pipe?? - jav1 - 09-03-2019
I have a Garret turbo from a OM613 that I need to build a down pipe for. Does anyone know the spec on the Turbo's output flange? Is it a standard 3" v-clamp or something Mercedes proprietary?
RE: OM613/OM648 (GT2359V) down pipe?? - baldur - 09-03-2019
It's a Mercedes thing with a bell mouthed pipe. I don't remember the pipe diameter, think it was 64mm. Normally it has a stupid clip to hold it in place but the clip always breaks. There is a bolted clamp that replaces the clip, part number A2034900441
RE: OM613/OM648 (GT2359V) down pipe?? - dcm - 09-03-2019
The flange is the same on a 606 300TD, fits upto the 2359v the same if that's easier to source.
RE: OM613/OM648 (GT2359V) down pipe?? - jav1 - 09-03-2019
Thanks-
I modified my OM606 downpipe to work with my gt2056 so I don't have my original to mod. but I need to go to the bigger (gt2359) turbo and I need to build a new down pipe. Does anyone have a 606 down pipe they would sell?