+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: OM606/648 OIL PAN GASKET (/showthread.php?tid=8299)
OM606/648 OIL PAN GASKET - 50harleyrider - 01-14-2020
Does anyone have insight into the best way to seal these pans? I have a 648 rear sump pan on my 606 swap and pan is leaking. I haven't had any luck sourcing a pan gasket so I assume there must be a sealing technique i'm not aware of. I have a tube of Elring Dirko Grey which I assume is a high end European RTV but want to apply it correctly and torque the pan bolts correctly.
RE: OM606/648 OIL PAN GASKET - frans-c - 01-15-2020
Surely you can get one at a dealership? They're not too expensive. I've tried the RTV route - unless the two mating surfaces are bone-dry (good luck with that - oil keeps draining down the engine block), it's going to leak. Had to re-do it with the proper metal gasket.
RE: OM606/648 OIL PAN GASKET - 50harleyrider - 01-15-2020
Do you have a part number? I am using a 648 pan on a 606
RE: OM606/648 OIL PAN GASKET - frans-c - 01-16-2020
A6060140022 or A6480140022, but they both look the same to me.