+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: Excess oil in boost circuit (/showthread.php?tid=8451)
Excess oil in boost circuit - 50harleyrider - 03-06-2021
Is this just something I should live with as long as there is little oil consumption? I suspect either too much pressure in the turbo oil supply, or blowby. I have retained the oe w210 breather tube which dumps into the turbo compressor inlet. I don't particularly like that and thought maybe dump the blowby into a high end Provent or equal separator. Any thoughts or suggestions? I do have a short 3/4" drain from the turbo so backup shouldn't be a problem. I also thought maybe the recent rebuilt by Dutch Auto om648 Garrett turbo I'm now running requires less oil then the 606 oe KKK.