+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: Low Budget OM602 build (/showthread.php?tid=8463)
Low Budget OM602 build - orion - 07-07-2021
Hello,
I try to build an OM602 n/a with an OM605 6mm EDC and DSL1. Now I am looking for a turbo, I use the triangular outlet manifold from 290TD W210. First intention was to work with a 606 turbo but now a saw the He221w. The goal is round about 200Hp. What kind of turbine housing is the better choice for my setup, the 7 or the 5.5?
Nozzles are rebuild and changed to 150bar, new headgasket and bearings are in the engine. External oilcooler and LLK is planed.
RE: Low Budget OM602 build - nastala - 07-08-2021
(07-07-2021, 11:53 PM)orion Hello,
I try to build an OM602 n/a with an OM605 6mm EDC and DSL1. Now I am looking for a turbo, I use the triangular outlet manifold from 290TD W210. First intention was to work with a 606 turbo but now a saw the He221w. The goal is round about 200Hp. What kind of turbine housing is the better choice for my setup, the 7 or the 5.5?
Nozzles are rebuild and changed to 150bar, new headgasket and bearings are in the engine. External oilcooler and LLK is planed.
5.5cm^2 is small from what I've seen. On my OM617A with the stock (for now, going dieselmeken later) pump and an intercooler, 7cm^2 is the move. You can really notice the difference at higher RPM.