+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Maintenance (https://www.superturbodiesel.com/std/forumdisplay.php?fid=22)
+--- Forum: General (https://www.superturbodiesel.com/std/forumdisplay.php?fid=4)
+--- Thread: 617 N/A cylinder head vs Turbo cylinder head (/showthread.php?tid=939)
617 N/A cylinder head vs Turbo cylinder head - DeliveryValve - 12-11-2009
I know on the turbo motors the valves are different from the N/A. But what other things are different just on the bare head?
Is it possible to use a N/A bare cylinder head on a turbo motor?
Anybody done a side by side comparison?
.
RE: 617 N/A cylinder head vs Turbo cylinder head - ForcedInduction - 12-12-2009
The casting is the same. The cam, exhaust valves and tappets are different. The prechambers and glowplugs depend on the years.
RE: 617 N/A cylinder head vs Turbo cylinder head - plurkje - 07-12-2010
Prechamber diameter is different
It will fit, but you'll loose some horses. Bad idea.