STD Tuning Engine Intercoolers

Intercoolers

Intercoolers

 
  • 0 Vote(s) - 0 Average
 
BenE67
Unregistered

15
04-05-2010, 10:21 PM #1
Experts;

I have already bought an European exhaust manifold and a Holset HE341Ve for my 1987 300D turbo. The next on my list is an intercooler. I have read a lot about different kinds. Some recommend a thin one (1.25" think) blocking the radiator. Some recommend a small but thick one (4") hanging low and blocking a small part of the radiator. What is your recommendations?

ben

PS: attached picture is the kind of set up I am going for, off course the exhaust manifold will be different.
PPS: do HE341Ve and HE351Ve use the same elbow?
This post was last modified: 04-05-2010, 10:25 PM by BenE67.
Attached Files
Image(s)
   
BenE67
04-05-2010, 10:21 PM #1

Experts;

I have already bought an European exhaust manifold and a Holset HE341Ve for my 1987 300D turbo. The next on my list is an intercooler. I have read a lot about different kinds. Some recommend a thin one (1.25" think) blocking the radiator. Some recommend a small but thick one (4") hanging low and blocking a small part of the radiator. What is your recommendations?

ben

PS: attached picture is the kind of set up I am going for, off course the exhaust manifold will be different.
PPS: do HE341Ve and HE351Ve use the same elbow?

Attached Files
Image(s)
   

ForcedInduction
Banned

3,628
04-05-2010, 10:53 PM #2
The thicker the intercooler the less efficient it will be. The ambient air heats as it passes through the core, by the time it reaches the back of a thick core it can't absorb much more heat and part of the engine air remains hot.
A large thin intercooler is much better than a stubby thick one.

Here is a chart from a TDI that compares a thick aftermarket side mount intercooler to a thin front mount intercooler.
   

341 and 351 vgt turbos are very different. They have little in common other than the same oil/drain ports and a 4" air mouth.
This post was last modified: 04-05-2010, 10:59 PM by ForcedInduction.
ForcedInduction
04-05-2010, 10:53 PM #2

The thicker the intercooler the less efficient it will be. The ambient air heats as it passes through the core, by the time it reaches the back of a thick core it can't absorb much more heat and part of the engine air remains hot.
A large thin intercooler is much better than a stubby thick one.

Here is a chart from a TDI that compares a thick aftermarket side mount intercooler to a thin front mount intercooler.
   

341 and 351 vgt turbos are very different. They have little in common other than the same oil/drain ports and a 4" air mouth.

BenE67
Unregistered

15
04-05-2010, 11:21 PM #3
So, would you say that going with a 1.25" thick FMIC blocking the whole radiator would have no/little effect on radiator cooling the engine?
BenE67
04-05-2010, 11:21 PM #3

So, would you say that going with a 1.25" thick FMIC blocking the whole radiator would have no/little effect on radiator cooling the engine?

ForcedInduction
Banned

3,628
04-05-2010, 11:29 PM #4
Yep. An intercooler will put less heat into the radiator air than the A/C condenser would.
ForcedInduction
04-05-2010, 11:29 PM #4

Yep. An intercooler will put less heat into the radiator air than the A/C condenser would.

BenE67
Unregistered

15
04-05-2010, 11:31 PM #5
Thanks, as always informative and helpful.
BenE67
04-05-2010, 11:31 PM #5

Thanks, as always informative and helpful.

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 4 Guest(s)
Users browsing this thread:
 4 Guest(s)