Throttle linkage hung up on exhaust manifold

STD Tuning Engine Throttle linkage hung up on exhaust manifold

Throttle linkage hung up on exhaust manifold

Throttle linkage hung up on exhaust manifold

View a Printable Version

0 Vote(s) - 0 Average

kamel

Naturally-aspirated SUCKS

176

10-03-2008, 12:15 AM #1

Got the turbo into the '78, but now I've run into a little problem. The throttle/transmission pressure adjuster on the passenger side of the engine will not move because the exhaust manifold is in the way. Any ideas?

'78 300D, OM617.912: 4spd manual, TB03 at 10PSI, 26*BTDC, DV's turned, HVAC, emissions system removed, e-fan, short ram, 3" downpipe to straight exhaust, W126 Bendix brakes, MR2 Spyder seats. 2890lbs

kamel

10-03-2008, 12:15 AM #1

Got the turbo into the '78, but now I've run into a little problem. The throttle/transmission pressure adjuster on the passenger side of the engine will not move because the exhaust manifold is in the way. Any ideas?

'78 300D, OM617.912: 4spd manual, TB03 at 10PSI, 26*BTDC, DV's turned, HVAC, emissions system removed, e-fan, short ram, 3" downpipe to straight exhaust, W126 Bendix brakes, MR2 Spyder seats. 2890lbs

~~ForcedInduction~~

Banned

3,628

10-03-2008, 04:04 AM #2

You could always rig a bowden cable to work in place of the linkage.

ForcedInduction

10-03-2008, 04:04 AM #2

You could always rig a bowden cable to work in place of the linkage.

View a Printable Version

0 Vote(s) - 0 Average

Users browsing this thread:
2 Guest(s)

Users browsing this thread:
2 Guest(s)