Turbo Rebuild/ Gasket/O- Ring replacement and cleaning
Turbo Rebuild/ Gasket/O- Ring replacement and cleaning
i rebuild the turbo yesterday which was easy except for the PITA removal part and the damn 30 year old bolts.
after removal i completely degreased the entire mid and lower engine parts and cleaned of all oil and other contaminants. It took much of the entire day and i finally finished up at 12 at night including the reinstall of turbo.
And it was very worth it... NO MORE OIL LEAKS... and Alot less smoke... all bolts threadlocked and tightened to speck plus all new o-rings and gaskets installed and other miscellaneous parts from mercedes source.... finshing the diesel purge today and the car will be like new.
i can here the turbo now with the cold air intake and it is awesome
:
W116Lorinser
08-04-2010, 04:40 PM #1the car was leaking oil slightly from the turbo area and from the drain tube gasket seal at the bottom.
i rebuild the turbo yesterday which was easy except for the PITA removal part and the damn 30 year old bolts.
after removal i completely degreased the entire mid and lower engine parts and cleaned of all oil and other contaminants. It took much of the entire day and i finally finished up at 12 at night including the reinstall of turbo.
And it was very worth it... NO MORE OIL LEAKS... and Alot less smoke... all bolts threadlocked and tightened to speck plus all new o-rings and gaskets installed and other miscellaneous parts from mercedes source.... finshing the diesel purge today and the car will be like new.
i can here the turbo now with the cold air intake and it is awesome:
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
08-04-2010, 09:21 PM #2Glad to hear it all worked out! Feel's nice to fix something and see actual results!
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
W116Lorinser
08-04-2010, 10:11 PM #3yea it was pretty awesome.. the whole time i felt like i would mess something up and the turbo would fall apart upon boost lol... but after taking it apart and reinstalling it twice, it came out 100%
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
08-05-2010, 10:35 AM #4haha. sweet!
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
1 Guest(s)
1 Guest(s)