Electric Fuel pump
Electric Fuel pump
max. pressure not specified.
Tom
Attached Files
10-03-2010, 06:14 AM
#102
(10-03-2010, 12:50 AM)muuris It doesn't have banjos like the old ones, but crappy plastic pieces with o-rings and a holy spirit holding the things together.
G@s engines make over 60psi with those types of connections.
ForcedInduction
10-03-2010, 06:14 AM
#102
(10-03-2010, 12:50 AM)muuris It doesn't have banjos like the old ones, but crappy plastic pieces with o-rings and a holy spirit holding the things together.
G@s engines make over 60psi with those types of connections.
10-03-2010, 10:03 AM
#103
(10-03-2010, 06:14 AM)ForcedInduction G@s engines make over 60psi with those types of connections.And on many OM605/6 the filter housings have been changed to old style ones due to leaking with under 15psi. I changed all the o-rings in mine but it still wasn't very convincing.
Anyone experimented how a g@sser high pressure fuel pump works with diesel in the winter?
This post was last modified: 10-03-2010, 10:05 AM by muuris.
Thanks tomnik, that's great! Seems pressures are a bit on the low side on mine, although I didn't test whilst in neutral, but while driving.
(10-03-2010, 06:14 AM)ForcedInduction G@s engines make over 60psi with those types of connections.And on many OM605/6 the filter housings have been changed to old style ones due to leaking with under 15psi. I changed all the o-rings in mine but it still wasn't very convincing.
Anyone experimented how a g@sser high pressure fuel pump works with diesel in the winter?
10-03-2010, 01:33 PM
#104
1990 Power Ram 50 V6 SOHC 24V 6g72
I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.
I'll be running an OEM Mitsubishi pump in my truck, it's already in the tank so why not use it? I'll be using the oem fpr as well, so we shall see...
1990 Power Ram 50 V6 SOHC 24V 6g72
I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.
10-03-2010, 02:03 PM
#105
(10-03-2010, 10:03 AM)muuris Thanks tomnik, that's great! Seems pressures are a bit on the low side on mine, although I didn't test whilst in neutral, but while driving.
(10-03-2010, 06:14 AM)ForcedInduction G@s engines make over 60psi with those types of connections.And on many OM605/6 the filter housings have been changed to old style ones due to leaking with under 15psi. I changed all the o-rings in mine but it still wasn't very convincing.
Anyone experimented how a g@sser high pressure fuel pump works with diesel in the winter?
It has not been below 70 degrees for me to test with...
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
10-03-2010, 02:03 PM #105(10-03-2010, 10:03 AM)muuris Thanks tomnik, that's great! Seems pressures are a bit on the low side on mine, although I didn't test whilst in neutral, but while driving.
(10-03-2010, 06:14 AM)ForcedInduction G@s engines make over 60psi with those types of connections.And on many OM605/6 the filter housings have been changed to old style ones due to leaking with under 15psi. I changed all the o-rings in mine but it still wasn't very convincing.
Anyone experimented how a g@sser high pressure fuel pump works with diesel in the winter?
It has not been below 70 degrees for me to test with...
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
10-03-2010, 03:09 PM
#106
(10-03-2010, 02:03 PM)Captain America It has not been below 70 degrees for me to test with...
Put them in the freezer.
ForcedInduction
10-03-2010, 03:09 PM
#106
(10-03-2010, 02:03 PM)Captain America It has not been below 70 degrees for me to test with...
Put them in the freezer.
10-03-2010, 04:39 PM
#107
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
10-03-2010, 04:39 PM #107I don't have access to a freezer where the fuel pump test stand is at my work. I doubt the girls inside would like a bucket of diesel in the fridge... haha
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
10-05-2010, 06:33 AM
#109
(10-04-2010, 03:18 AM)98taco3 anyone ever messed with an airdog system?
There is no benefit besides the electric pump. The stock filter system already deaerates the fuel and adding a water separator would cost about $15+filter.
http://www.superturbodiesel.com/std/chea...-1648.html
Electric pumps used on Powerstrokes can be had for around $75-100.
This post was last modified: 10-05-2010, 06:34 AM by ForcedInduction.
ForcedInduction
10-05-2010, 06:33 AM
#109
(10-04-2010, 03:18 AM)98taco3 anyone ever messed with an airdog system?
There is no benefit besides the electric pump. The stock filter system already deaerates the fuel and adding a water separator would cost about $15+filter.
http://www.superturbodiesel.com/std/chea...-1648.html
Electric pumps used on Powerstrokes can be had for around $75-100.
11-12-2010, 12:32 AM
#110
I would like to utilize the stock tank...thinking an inline pump and regulator is the answer.
The fuel system is one of the items that need to be addressed, before I can drive my fj40 home
Could you guys recommend a good in-line unit for my toyota fj40/om617 conversion?
I would like to utilize the stock tank...thinking an inline pump and regulator is the answer.
The fuel system is one of the items that need to be addressed, before I can drive my fj40 home
11-13-2010, 09:15 AM
#111
When I asked him about which lift pump he was running, he said that he wasn't running one...
I mentioned that the 300D came with an in-tank pump from the factory.
He has been running his without one for over a year, with apparently no adverse affects.
thought I would share the video of a happy jeep owner
YouTube - om617 in an 83 jeep scrambler
I met a guy yesterday who installed an om617 into an 83 jeep scrambler.
When I asked him about which lift pump he was running, he said that he wasn't running one...
I mentioned that the 300D came with an in-tank pump from the factory.
He has been running his without one for over a year, with apparently no adverse affects.
thought I would share the video of a happy jeep owner
YouTube - om617 in an 83 jeep scrambler
11-13-2010, 09:56 AM
#112
(11-13-2010, 09:15 AM)mr_manny I mentioned that the 300D came with an in-tank pump from the factory.
No there isn't. He is probably just using the g@sser's in-tank pump.
ForcedInduction
11-13-2010, 09:56 AM
#112
(11-13-2010, 09:15 AM)mr_manny I mentioned that the 300D came with an in-tank pump from the factory.
No there isn't. He is probably just using the g@sser's in-tank pump.
11-13-2010, 10:46 AM
#113
(11-13-2010, 09:56 AM)ForcedInduction(11-13-2010, 09:15 AM)mr_manny I mentioned that the 300D came with an in-tank pump from the factory.
No there isn't. He is probably just using the g@sser's in-tank pump.
sorry, but I was under the impression that in-tank pumps were factory
thanks for the education
(11-13-2010, 09:56 AM)ForcedInduction(11-13-2010, 09:15 AM)mr_manny I mentioned that the 300D came with an in-tank pump from the factory.
No there isn't. He is probably just using the g@sser's in-tank pump.
sorry, but I was under the impression that in-tank pumps were factory
thanks for the education
11-15-2010, 06:52 PM
#114
(11-13-2010, 09:56 AM)ForcedInduction(11-13-2010, 09:15 AM)mr_manny I mentioned that the 300D came with an in-tank pump from the factory.
No there isn't. He is probably just using the g@sser's in-tank pump.
The 83 Jeep that mr_manny was speaking of doesn't have an in tank pump stock.They were still using block mounted mechanical pumps,unless it was converted to FI before going diesel.
1990 Mercury Blue Max Cougar 3.8L with Automatic
Future OM617 Super Turbo Diesel Conversion with T56 6 Speed Manual
(11-13-2010, 09:56 AM)ForcedInduction(11-13-2010, 09:15 AM)mr_manny I mentioned that the 300D came with an in-tank pump from the factory.
No there isn't. He is probably just using the g@sser's in-tank pump.
The 83 Jeep that mr_manny was speaking of doesn't have an in tank pump stock.They were still using block mounted mechanical pumps,unless it was converted to FI before going diesel.
1990 Mercury Blue Max Cougar 3.8L with Automatic
Future OM617 Super Turbo Diesel Conversion with T56 6 Speed Manual
11-18-2010, 12:59 PM
#115
This post was last modified: 11-18-2010, 05:04 PM by rdirtycar.
1983 light ivory/palomino 300d turbo
Does anyone know how many GPH the MW pump can flow back through the return outlet at idle? I'm worried a big electric fuel pump will make overpressurization if the fuel can't get through the IP quick enough. I guess since the inlet is the same size as the outlet, overpressurization can only happen in the line before the pump so it doesn't matter. Am I wrong here?
1983 light ivory/palomino 300d turbo
11-18-2010, 09:17 PM
#117
(11-18-2010, 05:04 PM)muuris I tested with a g@sser pump, no pressure regulators other than the banjo. M-pump. Max pressure I got in any situation was a bit less than 30psi (before filter).
do you have 30 psi going uphill full throttle?
1983 light ivory/palomino 300d turbo
11-18-2010, 10:29 PM
#118
(11-15-2010, 06:52 PM)ben2go The 83 Jeep that mr_manny was speaking of doesn't have an in tank pump stock.They were still using block mounted mechanical pumps,unless it was converted to FI before going diesel.
correct, 83 jeep/om617 does not have an electric pump.
Toyota fj40 Landcruiser with a Mercedes om617 3.0L turbo diesel
(11-15-2010, 06:52 PM)ben2go The 83 Jeep that mr_manny was speaking of doesn't have an in tank pump stock.They were still using block mounted mechanical pumps,unless it was converted to FI before going diesel.
correct, 83 jeep/om617 does not have an electric pump.
Toyota fj40 Landcruiser with a Mercedes om617 3.0L turbo diesel
11-19-2010, 04:54 AM
#119
(11-18-2010, 09:17 PM)rdirtycar do you have 30 psi going uphill full throttle?
No. As it was a basic gasser high pressure pump, it wasn't enough for tuned M pump. When floored, pressure was less than 10psi at under 3500. Very low at 6000.
Now I have a different pump, have to re-install the pressure gauge to get the new readings.
(11-18-2010, 09:17 PM)rdirtycar do you have 30 psi going uphill full throttle?
No. As it was a basic gasser high pressure pump, it wasn't enough for tuned M pump. When floored, pressure was less than 10psi at under 3500. Very low at 6000.
Now I have a different pump, have to re-install the pressure gauge to get the new readings.
12-03-2010, 04:45 AM
#121
(11-19-2010, 12:27 PM)rdirtycar It's cool talking with people so far away. I'm going to get rid of the banjos and use straight metric to AN adapters in and out of the IP. Should be plenty for the 45 GPH or so at 30psi I think I have.
I'd like to see the pictures when you're done and hear what you think of the mod.
"Molly" Jan. '84 black/tan 300d 180k miles, two owner car
Silberpfeil
12-03-2010, 04:45 AM #121(11-19-2010, 12:27 PM)rdirtycar It's cool talking with people so far away. I'm going to get rid of the banjos and use straight metric to AN adapters in and out of the IP. Should be plenty for the 45 GPH or so at 30psi I think I have.
I'd like to see the pictures when you're done and hear what you think of the mod.
"Molly" Jan. '84 black/tan 300d 180k miles, two owner car
12-03-2010, 05:06 PM
#123
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
12-03-2010, 05:06 PM #123Yes hurry the hell up with that! I wanna see and know what fittings you ended up using
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
04-27-2017, 10:18 PM
#124
asking as I'm putting a 606.692 in a 1994 Toyota truck that currently has a ~50psi intank fuel pump for a gas FI engine. ideally i'd just be hooking up lines and not having to drop the fuel tank to remove the intank pump + buy new components.
This post was last modified: 04-27-2017, 10:22 PM by X Double Dot.
X Double Dot
04-27-2017, 10:18 PM #1247 years...this is a record revival attempt for me. Did anyone ever try running with a gas fuel injection electric intank pump (~typically rated around 50psi for the FI gas application) on their 606/5? Curious to know if the regulator system on the mercedes could handle it, and if so, did you get rid of the on engine mercedes lift pump? Additionally I was curious if anyone knew how the gas pump did during the winter months with the thicker diesel fuel.
asking as I'm putting a 606.692 in a 1994 Toyota truck that currently has a ~50psi intank fuel pump for a gas FI engine. ideally i'd just be hooking up lines and not having to drop the fuel tank to remove the intank pump + buy new components.
04-29-2017, 12:11 PM
#126
I have the 1.5 bar pressure release outlet banjo barrote mentioned, instead of the stock 0.5 bar one, dam sure works, every fuel fitting started leaking and I can't push in the priming button on my filter housing now (Bosch/CAV). That's with the standard lift pump, with stiffer spring & rebuild with Viton O-rings.
I got a Bosch 044 in the post and the internet people and my mates say the 1.5 bar banjo mentioned above will not flow enough to reduce the 4-5 bar from the 044 down to 1.5 bar, as this banjo bolt only has about a 4mm hole in the middle which the spring loaded ball acts upon.
So I bought one of those eBay rising rate fuel pressure regulators which I intend to fit downstream of the IP, and adjust down the IP gallery pressure to 1.5 bar reference pressure. ( I am copying 'erx' build thread on this forum's design, see his thread.
Ideally I would gauge pressure the IP inlet feed fitting and confirm the 1.5 bar banjo does not bleed sufficient fuel to regulate the 044 but I've already bought the FPR..
The above post possibly doesn't help you at at all but may make for interesting reading if nothing else..
Well I suppose to summarise, fit an eBay FPR and you can use the stock vehicles in tank pump..
Beers, HH
This post was last modified: 04-29-2017, 12:13 PM by Hario'.
Installed:
OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. [/i]
Impressive ancient post excavation lol.
I have the 1.5 bar pressure release outlet banjo barrote mentioned, instead of the stock 0.5 bar one, dam sure works, every fuel fitting started leaking and I can't push in the priming button on my filter housing now (Bosch/CAV). That's with the standard lift pump, with stiffer spring & rebuild with Viton O-rings.
I got a Bosch 044 in the post and the internet people and my mates say the 1.5 bar banjo mentioned above will not flow enough to reduce the 4-5 bar from the 044 down to 1.5 bar, as this banjo bolt only has about a 4mm hole in the middle which the spring loaded ball acts upon.
So I bought one of those eBay rising rate fuel pressure regulators which I intend to fit downstream of the IP, and adjust down the IP gallery pressure to 1.5 bar reference pressure. ( I am copying 'erx' build thread on this forum's design, see his thread.
Ideally I would gauge pressure the IP inlet feed fitting and confirm the 1.5 bar banjo does not bleed sufficient fuel to regulate the 044 but I've already bought the FPR..
The above post possibly doesn't help you at at all but may make for interesting reading if nothing else..
Well I suppose to summarise, fit an eBay FPR and you can use the stock vehicles in tank pump..
Beers, HH
Installed:
OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. [/i]
05-04-2017, 07:46 AM
#127
X Double Dot
05-04-2017, 07:46 AM #127thanks for the replies guys. i'm looking at this style http://fuelab.com/products/performance/f...regulator/. it's only up to 0.8 bar, but my guess is that is better than the vacuum the lift pump is currently working with. that said I don't claim to be an expert on these fuel systems. Is there a reason people have mentioned this 1.5 bar? is that for people going with big turbos/pumps?
05-04-2017, 04:45 PM
#129
(05-04-2017, 09:47 AM)barrote That is only necessary if u have a superpump.
With stock pumps is only placebo efect....
haha good to know. thanks for the info,
X Double Dot
05-04-2017, 04:45 PM #129(05-04-2017, 09:47 AM)barrote That is only necessary if u have a superpump.
With stock pumps is only placebo efect....
haha good to know. thanks for the info,
![[Image: 208104.png]](http://badges.fuelly.com/images/sig-us/208104.png)
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Users browsing this thread:
2 Guest(s)
2 Guest(s)