Dose anyone have trans bell housing measurements for a 617
Dose anyone have trans bell housing measurements for a 617
Im mating a r380 Land rover trans to a 617.
any help is greatly appreciated
![[Image: img1231808006712-1.jpg]](http://i459.photobucket.com/albums/qq320/cannonballsdl/img1231808006712-1.jpg)
![[Image: img1231724701604-1-1.jpg]](http://i459.photobucket.com/albums/qq320/cannonballsdl/img1231724701604-1-1.jpg)
![[Image: img1231603208122.jpg]](http://i459.photobucket.com/albums/qq320/cannonballsdl/img1231603208122.jpg)
cannonballSDL
02-15-2011, 12:41 AM #1im looking for raw measurements (+/- .04'') or a cad file for a adapter plate im building.
Im mating a r380 Land rover trans to a 617.
any help is greatly appreciated
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
As in depth? Or bolt pattern? I have a spare trans and a adapter plate that I can measur out for you.
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
1990 Power Ram 50 V6 SOHC 24V 6g72
I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.
What format do you want? I've got a CMM scan off of a 617, all holes, including the starter and locating lip.
1990 Power Ram 50 V6 SOHC 24V 6g72
I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.
(02-15-2011, 01:11 AM)dieselboy As in depth? Or bolt pattern? I have a spare trans and a adapter plate that I can measur out for you.Yes please
(02-15-2011, 09:19 AM)300D50 What format do you want? I've got a CMM scan off of a 617, all holes, including the starter and locating lip.
my machine shop told me a TIFF file will be the best but anything you send well be workable. My email is Stefan@eurodesignmk.com
Huge thanks guys!
cannonballSDL
02-15-2011, 11:16 AM #4(02-15-2011, 01:11 AM)dieselboy As in depth? Or bolt pattern? I have a spare trans and a adapter plate that I can measur out for you.Yes please
(02-15-2011, 09:19 AM)300D50 What format do you want? I've got a CMM scan off of a 617, all holes, including the starter and locating lip.
my machine shop told me a TIFF file will be the best but anything you send well be workable. My email is Stefan@eurodesignmk.com
Huge thanks guys!
EDIT:
Just found them, I never probed the bell housing bolt pattern, just the engine pattern and starter location.
Would you still need those?
1990 Power Ram 50 V6 SOHC 24V 6g72
I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.
I'll dig them out, they're in either DXF or STEP format, raw scans.
EDIT:
Just found them, I never probed the bell housing bolt pattern, just the engine pattern and starter location.
Would you still need those?
1990 Power Ram 50 V6 SOHC 24V 6g72
I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.
How did you scan it? and if i gave the R380 bell housing to you could you scan that?
cannonballSDL
02-15-2011, 02:35 PM #6please!
How did you scan it? and if i gave the R380 bell housing to you could you scan that?
EDIT:
Here you are.
I take no responsibility for any problems that might arise, but it should be good.
It's raw data, and will need to be processed before it's usable.
1990 Power Ram 50 V6 SOHC 24V 6g72
I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.
I'll throw them up on my site in a few, and drop the link in here.
EDIT:
Here you are.
I take no responsibility for any problems that might arise, but it should be good.
It's raw data, and will need to be processed before it's usable.
1990 Power Ram 50 V6 SOHC 24V 6g72
I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.
2 Guest(s)
2 Guest(s)