cam timing offset woodruff keys
cam timing offset woodruff keys
http://www.peachparts.com/shopforum/show...p?t=177638
http://www.peachparts.com/Wikka/OM617CamWoodruffKey
http://www.peachparts.com/Wikka/OM617TimingChainStretch
4 keys listed here
http://www.peachparts.com/shopforum/show...p?t=274085
I adjusted the valves when I first got the car and again just recently. Both times the intake valves had no gap and the exhaust were for the most part just fine.
If the chain is significantly stretched then all the valves will be opening to late, right? Does the way the valves were out of spec seem like normal behavior or is that some kind of evidence?
What should I do? Order some keys and then do that 2mm test? Or do the test and then try and pick a key if one is needed at all?
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
I have been looking at these threads.
http://www.peachparts.com/shopforum/show...p?t=177638
http://www.peachparts.com/Wikka/OM617CamWoodruffKey
http://www.peachparts.com/Wikka/OM617TimingChainStretch
4 keys listed here
http://www.peachparts.com/shopforum/show...p?t=274085
I adjusted the valves when I first got the car and again just recently. Both times the intake valves had no gap and the exhaust were for the most part just fine.
If the chain is significantly stretched then all the valves will be opening to late, right? Does the way the valves were out of spec seem like normal behavior or is that some kind of evidence?
What should I do? Order some keys and then do that 2mm test? Or do the test and then try and pick a key if one is needed at all?
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
ForcedInduction
03-03-2011, 06:27 PM
#3
Don't forget that you need to adjust injection timing to get the full benefits.
"You did not mention how long went in between."
probably less than the 10,000 between the two jobs. Maybe like 7-8000.
I guess I'll do the measurement procedure first then order the key. Looks like the keys are $20 each.
forced-
"Don't forget that you need to adjust injection timing to get the full benefits."
after the adjustment which way will the injection need to go? earlier as well? Or just need to measure.
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
winmutt-
"You did not mention how long went in between."
probably less than the 10,000 between the two jobs. Maybe like 7-8000.
I guess I'll do the measurement procedure first then order the key. Looks like the keys are $20 each.
forced-
"Don't forget that you need to adjust injection timing to get the full benefits."
after the adjustment which way will the injection need to go? earlier as well? Or just need to measure.
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
2 Guest(s)
2 Guest(s)