Junkyard Finds
Junkyard Finds
10-23-2010, 01:05 AM
#51
(10-17-2010, 11:05 AM)ForcedInduction Just the SLS, fanfare horns and amber corner lights.
Fanfare horns...
How do this differ from US horns??
"Molly" Jan. '84 black/tan 300d 180k miles, two owner car
Silberpfeil
10-23-2010, 01:05 AM #51(10-17-2010, 11:05 AM)ForcedInduction Just the SLS, fanfare horns and amber corner lights.
Fanfare horns...
How do this differ from US horns??
"Molly" Jan. '84 black/tan 300d 180k miles, two owner car
10-23-2010, 12:43 PM
#53
I figured I would just make my own relay to switch between the two horns I also grabbed the fanfair horn switch for the dash so I figured I'd use that to activate the relay any thoughts?
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
10-23-2010, 12:43 PM #53How did you wire it up? I noticed on the car I got the horns out of there was a big relay box wired in to the harness near the fan fair horn
I figured I would just make my own relay to switch between the two horns I also grabbed the fanfair horn switch for the dash so I figured I'd use that to activate the relay any thoughts?
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
10-23-2010, 11:40 PM
#54
I have two of the switches, and section of harness, if anybody needs one.
This post was last modified: 10-23-2010, 11:41 PM by ForcedInduction.
ForcedInduction
10-23-2010, 11:40 PM
#54
Thats not my video. The switch for it is just a simple SPDT on-on type that sends power to either horn type from the same circuit.
I have two of the switches, and section of harness, if anybody needs one.
10-26-2010, 03:01 AM
#55
(10-17-2010, 11:05 AM)ForcedInduction Just the SLS, fanfare horns and amber corner lights.
FI if the fanfare horns are still there the next time you go I'd probably be interested if you don't mind. How much ($$) do you think you'd need for them (+s/h)?
BTW any ideas on where to find a 600 series horn?? Sounds like a darned ocean going liner or tugboat. Pretty awesome.
"Molly" Jan. '84 black/tan 300d 180k miles, two owner car
Silberpfeil
10-26-2010, 03:01 AM #55(10-17-2010, 11:05 AM)ForcedInduction Just the SLS, fanfare horns and amber corner lights.
FI if the fanfare horns are still there the next time you go I'd probably be interested if you don't mind. How much ($$) do you think you'd need for them (+s/h)?
BTW any ideas on where to find a 600 series horn?? Sounds like a darned ocean going liner or tugboat. Pretty awesome.
"Molly" Jan. '84 black/tan 300d 180k miles, two owner car
11-28-2010, 11:47 AM
#56
Now I have to wait for a long wheel base w126 to come in to the yards to grab the rear carpet and rear door panels I also really need to find a pair of good gray sun visors!
my car had a tan interior witch was a disaster area and completely useless!
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
11-28-2010, 11:47 AM #56I got front and back nearly perfect gray leather seats and both front door panels and front carpets for my 300sdl out of a really nice 1990 300se at the you pull and pay fro $180 including a good passenger mirror and headliner front panel!
Now I have to wait for a long wheel base w126 to come in to the yards to grab the rear carpet and rear door panels I also really need to find a pair of good gray sun visors!
my car had a tan interior witch was a disaster area and completely useless!
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
11-28-2010, 11:36 PM
#57
Now the cruise works but it surges acceleration and deceleration back and forth by like 10mph yikes
And the door locks work! well sort of now they will all unlock just fine!
But only the front doors and the trunk lock the back doors try but wont go down all the way they must have a leak? also the gas door lock is broken!
The line on the pump its self was a little loose so I will start by replacing the rubber connector line!
and score I got a nearly perfect dash with no cracks! It was a lot easier than I thought it only took me about 20min to get it out!
This post was last modified: 11-28-2010, 11:38 PM by willbhere4u.
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
11-28-2010, 11:36 PM #57I got and installed a factory leather steering wheel today! F#@* that stupid knee absorber thing under the dash it sucks to remove! and I replaced my broken cruise control switch and also replace my vacuum locking pump!
Now the cruise works but it surges acceleration and deceleration back and forth by like 10mph yikes
And the door locks work! well sort of now they will all unlock just fine!
But only the front doors and the trunk lock the back doors try but wont go down all the way they must have a leak? also the gas door lock is broken!
The line on the pump its self was a little loose so I will start by replacing the rubber connector line!
and score I got a nearly perfect dash with no cracks! It was a lot easier than I thought it only took me about 20min to get it out!
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
03-07-2011, 01:45 AM
#59
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
Your 80 Sd should have alumn hood and trunk. Mine does..
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
03-07-2011, 04:03 PM
#60
(02-28-2011, 03:49 PM)garage I FOUND-out that a 1981 w126SD trunk lid is aluminum, and a 1983 w126SD trunk lid is steel.
And the rest of the car is made of lead hahaha
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
03-07-2011, 04:03 PM #60(02-28-2011, 03:49 PM)garage I FOUND-out that a 1981 w126SD trunk lid is aluminum, and a 1983 w126SD trunk lid is steel.
And the rest of the car is made of lead hahaha
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
03-07-2011, 10:11 PM
#61
1990 Power Ram 50 V6 SOHC 24V 6g72
I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.
Due to their tank-like nature, I'd think depleted uranium would be used instead of lead. :p
1990 Power Ram 50 V6 SOHC 24V 6g72
I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.
04-05-2011, 05:56 PM
#63
![[Image: 857960b7.jpg]](http://i136.photobucket.com/albums/q179/dieselboy740/857960b7.jpg)
But I did get this lol.
![[Image: 1027a587.jpg]](http://i136.photobucket.com/albums/q179/dieselboy740/1027a587.jpg)
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
I was bummed to see this at the jy today.
But I did get this lol.
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
04-06-2011, 04:00 PM
#65
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
04-06-2011, 04:00 PM #65Yeah! I got one off a black one of those things...
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
04-07-2011, 05:27 PM
#66
(04-05-2011, 05:56 PM)dieselboy ...
But I did get this lol.
..
That's an easy one to get. You didn't have to deal with that dreaded York A/C compressor.
.
Gota love Mercedes Diesels!
.
DeliveryValve
04-07-2011, 05:27 PM #66(04-05-2011, 05:56 PM)dieselboy ...
But I did get this lol.
..
That's an easy one to get. You didn't have to deal with that dreaded York A/C compressor.
.
Gota love Mercedes Diesels!
.
04-07-2011, 09:26 PM
#67
what if we made a list of parts we are looking for in the junkyards. i usually am able to make it out to the ones near me every week or two, but i have to pick one to go to, so i often don't hit the same one up more than every month or two - i probably miss a lot of stuff. we would all keep tabs on the list, and if we find something in the junkyard, buy and pull it for the person who needs it and they pay the picker back + shipping / etc. i think that even just amongst the few of us in socal, we could really expand our abilities to hunt down junkyard parts. i for one would have no problem grabbing odds and ends for the core group of people on here. obviously we would have to limit it to members who we all know and can vouch for so nobody gets stuck with a $75 IP they dont need.
example: i need a proper 240D throttle linkage setup. it's $8 from ecology, but i can't find any so far.
i just had an idea:
what if we made a list of parts we are looking for in the junkyards. i usually am able to make it out to the ones near me every week or two, but i have to pick one to go to, so i often don't hit the same one up more than every month or two - i probably miss a lot of stuff. we would all keep tabs on the list, and if we find something in the junkyard, buy and pull it for the person who needs it and they pay the picker back + shipping / etc. i think that even just amongst the few of us in socal, we could really expand our abilities to hunt down junkyard parts. i for one would have no problem grabbing odds and ends for the core group of people on here. obviously we would have to limit it to members who we all know and can vouch for so nobody gets stuck with a $75 IP they dont need.
example: i need a proper 240D throttle linkage setup. it's $8 from ecology, but i can't find any so far.
04-10-2011, 02:10 PM
#70
(04-10-2011, 01:50 PM)garage Found a w115 intake today
I get paid tomorrow, so ill be picking it up then.
Unfortunately the darn AC compressor is still in the way.
Nice. My friend really wants one for his wagon.
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
(04-10-2011, 01:50 PM)garage Found a w115 intake today
I get paid tomorrow, so ill be picking it up then.
Unfortunately the darn AC compressor is still in the way.
Nice. My friend really wants one for his wagon.
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
04-10-2011, 02:15 PM
#71
Totaldisaster has one for sale.
I think DeliveryValve has one for sale too..
This post was last modified: 04-10-2011, 02:24 PM by garage.
1987 300D: EGR Delete, ARV Delete, Cold Air Intake...
http://www.superturbodiesel.com/std/thre...o-egr-less
Totaldisaster has one for sale.
I think DeliveryValve has one for sale too..
1987 300D: EGR Delete, ARV Delete, Cold Air Intake...
04-10-2011, 07:28 PM
#72
(03-07-2011, 04:03 PM)Captain America(02-28-2011, 03:49 PM)garage I FOUND-out that a 1981 w126SD trunk lid is aluminum, and a 1983 w126SD trunk lid is steel.
And the rest of the car is made of lead hahaha
Does anyone actually have a list of what cars has aluminum/steel? Both my 81s have aluminum, and I checked an 82 and 83 at the yards and they were aluminum too. I want a steel trunk lid so I can use mag mount antennas and magnetic bumper stickers...
Ich liebe meine Autos!
1981 Mercedes-Benz 300SD | 156K Miles | 2nd Owner | EGR Disabled [Removal Pending] | ALDA Removed | Straight Pipes | GT2256V??? | Laser Interceptor | Engine swap over summer, hopefully with GT2256V attached...
1981 Mercedes-Benz 300SD | Odo Stopped at 160K (at least 50K more) | EGR Disabled | ALDA All The Way Out | Straight pipes | FM-870 Remote Start Alarm System | B100 Biodiesel | AC Fixed x2 | Trunk crushed in
| Retired to garage.Excessive speeding? It ain't excessive till I redline!
(03-07-2011, 04:03 PM)Captain America(02-28-2011, 03:49 PM)garage I FOUND-out that a 1981 w126SD trunk lid is aluminum, and a 1983 w126SD trunk lid is steel.
And the rest of the car is made of lead hahaha
Does anyone actually have a list of what cars has aluminum/steel? Both my 81s have aluminum, and I checked an 82 and 83 at the yards and they were aluminum too. I want a steel trunk lid so I can use mag mount antennas and magnetic bumper stickers...
Ich liebe meine Autos!
1981 Mercedes-Benz 300SD | 156K Miles | 2nd Owner | EGR Disabled [Removal Pending] | ALDA Removed | Straight Pipes | GT2256V??? | Laser Interceptor | Engine swap over summer, hopefully with GT2256V attached...
1981 Mercedes-Benz 300SD | Odo Stopped at 160K (at least 50K more) | EGR Disabled | ALDA All The Way Out | Straight pipes | FM-870 Remote Start Alarm System | B100 Biodiesel | AC Fixed x2 | Trunk crushed in
| Retired to garage.Excessive speeding? It ain't excessive till I redline!
04-10-2011, 08:39 PM
#74
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
Put another magnet in under the trunk? Glue a small peice of steel in?
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
04-17-2011, 06:02 AM
#76
Ed
yankneck696
04-17-2011, 06:02 AM #76We used to do a rebuild on every M90 that came into the yard. Once you get all the correct #'s it's about $28.00 for the parts from the local bearing shop.
Ed
04-17-2011, 08:10 AM
#77
It's being pulled.
1990 Power Ram 50 V6 SOHC 24V 6g72
I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.
06-04-2011, 10:33 PM
#78
![[Image: c0f2082a.jpg]](http://i136.photobucket.com/albums/q179/dieselboy740/c0f2082a.jpg)
![[Image: 7d4a4fff.jpg]](http://i136.photobucket.com/albums/q179/dieselboy740/7d4a4fff.jpg)
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
todays 50% off score
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
06-06-2011, 12:09 AM
#79
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
06-06-2011, 12:09 AM #79Mmmmm Lucky. I like those! What is that stuff from?
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
06-06-2011, 02:11 AM
#80
I found a 2.47:1 diff but I was out of money by the time I found it.
This post was last modified: 06-06-2011, 02:13 AM by dieselboy.
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
I tried the wheels on my Sd and I don't really care for them. I got them off a w126sd. They at 16x 7.5 with 70% kumhos ast 225 tires. I got the 160mph speedo from a 79 v8 w116 with STD gauges too. I'm going to sell the wheels and tires for about 300$.
I found a 2.47:1 diff but I was out of money by the time I found it.
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
06-13-2011, 10:59 AM
#82
(06-11-2011, 03:22 AM)RonB You guys dont know how lucky you are! . To get parts i often have to buy a whole car ,remove the bits i need then scrap the rest.
We do that too! I did haha
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
06-13-2011, 10:59 AM #82(06-11-2011, 03:22 AM)RonB You guys dont know how lucky you are! . To get parts i often have to buy a whole car ,remove the bits i need then scrap the rest.
We do that too! I did haha
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
06-23-2011, 08:18 AM
#83
The yard price list says 27 each with core charge.
1990 Power Ram 50 V6 SOHC 24V 6g72
I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.
Found a W123 with an ok set of alloy bundts, anyone want em? I'll be at the yard latter today.
The yard price list says 27 each with core charge.
1990 Power Ram 50 V6 SOHC 24V 6g72
I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.
06-25-2011, 04:10 PM
#84
Uhhh did some research and I might go back tomorrow to make sure that the car I got it from isn't a 6.9. If it is then........
This post was last modified: 06-26-2011, 12:50 AM by dieselboy.
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
Got a 2.65 diff out of a w116 today!!! And rear bilstiens.
Uhhh did some research and I might go back tomorrow to make sure that the car I got it from isn't a 6.9. If it is then........
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
06-27-2011, 11:12 AM
#85
82 300SD aka The Flyin Pumpkin (Gone): 7.5mm super M-pump, T3 60 trim turbo, Coldish air intake, A/W intercooler, propane injection, SW Boost and EGT gauges, Monark 265 nozzles, ported/polished cylinder head.
84 Euro 300D 4 sp: White with black trunk and hood. Blue cloth interior. Manual everything. 300DT front swaybar. C320 17" wheels. Now with the Flyin Pumpkins engine!
If it is a 6.9 then it should be a LSD unit also! I've had my 2.65 from the same car in my 82 300SD. I've also test fit it into my 77 240D. It fits in both cars, but you will have to swap the input flange for the smaller one on your stock diff. You may have to flip the rear diff mount 180 degrees to make it fit correct, but other than that it should fit right in!
82 300SD aka The Flyin Pumpkin (Gone): 7.5mm super M-pump, T3 60 trim turbo, Coldish air intake, A/W intercooler, propane injection, SW Boost and EGT gauges, Monark 265 nozzles, ported/polished cylinder head.
84 Euro 300D 4 sp: White with black trunk and hood. Blue cloth interior. Manual everything. 300DT front swaybar. C320 17" wheels. Now with the Flyin Pumpkins engine!
06-27-2011, 11:49 AM
#86
.
Gota love Mercedes Diesels!
.
DeliveryValve
06-27-2011, 11:49 AM #86Just open it up. If it has clutches, it's an LSD and most likely came from a 6.9.
.
Gota love Mercedes Diesels!
.
06-27-2011, 02:22 PM
#87
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
No LSD unless it's really worn. But the car didn't have hydraulic suspension so it wasn't a 6.9.
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
06-27-2011, 06:54 PM
#88
82 300SD aka The Flyin Pumpkin (Gone): 7.5mm super M-pump, T3 60 trim turbo, Coldish air intake, A/W intercooler, propane injection, SW Boost and EGT gauges, Monark 265 nozzles, ported/polished cylinder head.
84 Euro 300D 4 sp: White with black trunk and hood. Blue cloth interior. Manual everything. 300DT front swaybar. C320 17" wheels. Now with the Flyin Pumpkins engine!
It should have the gear ratio stamped on the lower left corner of the diff, next to the rear diff cover. If it is an LSD unit, it should have a metal tag on one of the output flange bolts also. I have no idea if the clutches are any good in mine or not, I don't have enough power to test that yet! LOL
82 300SD aka The Flyin Pumpkin (Gone): 7.5mm super M-pump, T3 60 trim turbo, Coldish air intake, A/W intercooler, propane injection, SW Boost and EGT gauges, Monark 265 nozzles, ported/polished cylinder head.
84 Euro 300D 4 sp: White with black trunk and hood. Blue cloth interior. Manual everything. 300DT front swaybar. C320 17" wheels. Now with the Flyin Pumpkins engine!
10-07-2011, 03:29 PM
#89
An hour later, I am in possession of a smooth rotating 717.400, driveshaft, shifter and pedal assembly.
Not sure what I am going to do with it. For now it's going into storage with all my other Mercedes crap to collect dust.
.
Attached Files
Image(s)Gota love Mercedes Diesels!
.
DeliveryValve
10-07-2011, 03:29 PM #89Was walking with a buddy in the yard today and noticed this 1982 280ce with Euro bumpers. Checked it out. It's a Grey Market Car with 87,415 on the ODO (not sure if that's accurate), M110 engine and has a numbers matching 717.400 5 speed!
An hour later, I am in possession of a smooth rotating 717.400, driveshaft, shifter and pedal assembly.
Not sure what I am going to do with it. For now it's going into storage with all my other Mercedes crap to collect dust.
.
Attached Files
Image(s)Gota love Mercedes Diesels!
.
10-07-2011, 04:22 PM
#90
(10-07-2011, 03:29 PM)DeliveryValve Was walking with a buddy in the yard today and noticed this 1982 280ce with Euro bumpers. Checked it out. It's a Grey Market Car with 87,415 on the ODO (not sure if that's accurate), M110 engine and has a numbers matching 717.400 5 speed!
An hour later, I am in possession of a smooth rotating 717.400, driveshaft, shifter and pedal assembly.
Not sure what I am going to do with it. For now it's going into storage with all my other Mercedes crap to collect dust.
.
who junks a car like that? amazing. Thats a career find, you lucky dog!
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
(10-07-2011, 03:29 PM)DeliveryValve Was walking with a buddy in the yard today and noticed this 1982 280ce with Euro bumpers. Checked it out. It's a Grey Market Car with 87,415 on the ODO (not sure if that's accurate), M110 engine and has a numbers matching 717.400 5 speed!
An hour later, I am in possession of a smooth rotating 717.400, driveshaft, shifter and pedal assembly.
Not sure what I am going to do with it. For now it's going into storage with all my other Mercedes crap to collect dust.
.
who junks a car like that? amazing. Thats a career find, you lucky dog!
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
10-07-2011, 04:36 PM
#91
(10-07-2011, 04:22 PM)dropnosky ...
who junks a car like that? amazing. Thats a career find, you lucky dog!
Exactly! I was just sad laying under that thing. Amazingly straight and rust free car. Only issue was the the left part of the Euro three piece bumper was crumpled and a cracked dash. The interior was not faded or worn at all, apart from a rip in the driver's side seat. I was temped to pull the motor which had a great Sanden compressor A/C setup. But probably in another day.
.
Gota love Mercedes Diesels!
.
DeliveryValve
10-07-2011, 04:36 PM #91(10-07-2011, 04:22 PM)dropnosky ...
who junks a car like that? amazing. Thats a career find, you lucky dog!
Exactly! I was just sad laying under that thing. Amazingly straight and rust free car. Only issue was the the left part of the Euro three piece bumper was crumpled and a cracked dash. The interior was not faded or worn at all, apart from a rip in the driver's side seat. I was temped to pull the motor which had a great Sanden compressor A/C setup. But probably in another day.
.
Gota love Mercedes Diesels!
.
mike-81-240d
10-07-2011, 06:00 PM #92Ughh you suck...
1981 Mercedes 300TD Lowered 4 speed manual Holset HX30
10-07-2011, 08:27 PM
#93
(10-07-2011, 06:00 PM)mike-81-240d Ughh you suck...
Im telling you, deliveryvalve owns pick & pull or ecology. Its his company, thats the only way he keeps finding crazy shit in the yards. When he says "I was walking with a buddy", he means that he authorized a national search in his chain of yards for that specific part.
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
(10-07-2011, 06:00 PM)mike-81-240d Ughh you suck...
Im telling you, deliveryvalve owns pick & pull or ecology. Its his company, thats the only way he keeps finding crazy shit in the yards. When he says "I was walking with a buddy", he means that he authorized a national search in his chain of yards for that specific part.
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
10-08-2011, 01:29 AM
#94
(10-07-2011, 06:00 PM)mike-81-240d Ughh you suck...
My words exactly, when I learned you got that wagon front sway bar pulled for you...
Pulled a 120-amp W123 alternator the other day.
Also pulled an MW-pump. Under thirty bucks. Including the lines. The injectors too. However, I must say, whoever put that lower front attachment bolt on, must be the same Teufel as designed how the cruise control amp is fastened-on...
DeliveryValve's buddy's other walks are, of course, on water...
This post was last modified: 10-08-2011, 11:42 AM by JustPassinThru.
Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).
JustPassinThru
10-08-2011, 01:29 AM #94(10-07-2011, 06:00 PM)mike-81-240d Ughh you suck...
My words exactly, when I learned you got that wagon front sway bar pulled for you...
Pulled a 120-amp W123 alternator the other day.
Also pulled an MW-pump. Under thirty bucks. Including the lines. The injectors too. However, I must say, whoever put that lower front attachment bolt on, must be the same Teufel as designed how the cruise control amp is fastened-on...
DeliveryValve's buddy's other walks are, of course, on water...
Gone but not forgotten: two W123 sedans and two W124 wagons.
W124 1987 300TD wagon, for sale, $1000 (some assembly required).
10-08-2011, 11:02 PM
#95
(10-07-2011, 08:27 PM)dropnosky(10-07-2011, 06:00 PM)mike-81-240d Ughh you suck...
Im telling you, deliveryvalve owns pick & pull or ecology. Its his company, thats the only way he keeps finding crazy shit in the yards. When he says "I was walking with a buddy", he means that he authorized a national search in his chain of yards for that specific part.
Bwaaaaaahhhaaahhh!! I wish! LOL!!!!
It be free parts and extreme discounts for all STD members if that was true!
.
Gota love Mercedes Diesels!
.
DeliveryValve
10-08-2011, 11:02 PM #95(10-07-2011, 08:27 PM)dropnosky(10-07-2011, 06:00 PM)mike-81-240d Ughh you suck...
Im telling you, deliveryvalve owns pick & pull or ecology. Its his company, thats the only way he keeps finding crazy shit in the yards. When he says "I was walking with a buddy", he means that he authorized a national search in his chain of yards for that specific part.
Bwaaaaaahhhaaahhh!! I wish! LOL!!!!
It be free parts and extreme discounts for all STD members if that was true!
.
Gota love Mercedes Diesels!
.
![[Image: FalkonSig.png]](http://i160.photobucket.com/albums/t162/DanielWGK2/designs/FalkonSig.png)
10-12-2011, 10:55 PM
#97
It's slightly different that the damaged one on my euro wagon the chrome wraps further around the side of the car I should have grabbed the rubber fillers but I didn't have the time or tools so I will modify the ones I have to fit it!
I also got a RH front fender for my 1963 220s
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
10-12-2011, 10:55 PM #97I got a w123 euro front bumper off a 280e
It's slightly different that the damaged one on my euro wagon the chrome wraps further around the side of the car I should have grabbed the rubber fillers but I didn't have the time or tools so I will modify the ones I have to fit it!
I also got a RH front fender for my 1963 220s
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
10-18-2011, 12:20 AM
#98
-> 280E (No rubber flaps) - http://upload.wikimedia.org/wikipedia/co...erugia.jpg
-> w123 (rubber flaps on the side) - http://images.paultan.org/images/W123_White.jpg
1982 s123 300TD TurboDiesel (US Spec) in France
Indeed, the 280 (both saloon and coupe) bumpers were all chrome / metal with no rubber flaps on the side. That was standard for the Euro spec.
-> 280E (No rubber flaps) - http://upload.wikimedia.org/wikipedia/co...erugia.jpg
-> w123 (rubber flaps on the side) - http://images.paultan.org/images/W123_White.jpg
1982 s123 300TD TurboDiesel (US Spec) in France
10-18-2011, 09:15 AM
#99
I'll have to modify the ones I have to fit the new bumper
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
10-18-2011, 09:15 AM #99I wish I had known that! I would have grabbed the rubber moldings to
I'll have to modify the ones I have to fit the new bumper
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
11-14-2011, 01:12 AM
#100
This post was last modified: 11-14-2011, 01:12 AM by Captain America.
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
11-14-2011, 01:12 AM #100Found some of the Early (low spec) euro lights! When I was looking for some Jeeps parts on Saturday.. The 240 also had the Aluminum wheels, but I didn't grab those. They're in pretty good shape, need a little polish job, some seals and they will be good to go.
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Users browsing this thread:
29 Guest(s)
29 Guest(s)
Users browsing this thread:
29 Guest(s)
29 Guest(s)