300D 2.5 T parts
300D 2.5 T parts
I have some access right now. No head or block.
Nice body, interior (dark grey on light grey)
nice set of injection lines
good turbo with a little wiggle on the shaft, vacuum actuated (holds vac)
other misc.
totaldisaster
04-28-2011, 04:38 PM #1OM602 turbo parts.
I have some access right now. No head or block.
Nice body, interior (dark grey on light grey)
nice set of injection lines
good turbo with a little wiggle on the shaft, vacuum actuated (holds vac)
other misc.
you get speshow discownt.... website ownah, pay sheeppeeng onry.
PM your details I will get to you this weekend.
oh.... it was like '92 -ish. ya'know, vented passenger fender and vacuum controlled turbo WG. w124
totaldisaster
05-04-2011, 12:11 AM #3Very doo-able.
you get speshow discownt.... website ownah, pay sheeppeeng onry.
PM your details I will get to you this weekend.
oh.... it was like '92 -ish. ya'know, vented passenger fender and vacuum controlled turbo WG. w124
You are talking about the EDS pressure sensor, correct? not the overboost switch....
totaldisaster
05-04-2011, 01:23 AM #41990, will that work?
You are talking about the EDS pressure sensor, correct? not the overboost switch....
Cruise control amp, servo, and speed control sensor from behind the instrument cluster. I've seen something about an encoder but, I'm not sure where that is just yet (heck the encoder could be one of the parts I mentioned or part of one for all I know).
The rpm sensor at the flywheel would be another item I might find useful.
Anything you could help with would be great.
Thanks,
Wes
***********************************************
1993 300D 2.5L turbo. W124.128 2.5L 602.962
1991 350SD W126.134 Transplanted a 3.0L 603.961 into it.
Did the cruise control work? I could use any parts related to CC that might be good.
Cruise control amp, servo, and speed control sensor from behind the instrument cluster. I've seen something about an encoder but, I'm not sure where that is just yet (heck the encoder could be one of the parts I mentioned or part of one for all I know).
The rpm sensor at the flywheel would be another item I might find useful.
Anything you could help with would be great.
Thanks,
Wes
***********************************************
1993 300D 2.5L turbo. W124.128 2.5L 602.962
1991 350SD W126.134 Transplanted a 3.0L 603.961 into it.
Should look like
![[Image: full]](http://jeemu.kuvat.fi/kuvat/BMW%20E21%20%28diesel%29/IMG_2691.JPG/full)
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
I need the tube that come from the tstat housing to the aux water pump. Should be a horizontal U instead of a vertical snake.
Should look like
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
4 Guest(s)
4 Guest(s)