1979 300SD Turbo Diesel ... rear CLUNK when turning
1979 300SD Turbo Diesel ... rear CLUNK when turning
This morning when driving around a bend/curve or turning at any speed, I hear a loud CLUNK CLUNK CLUNK ... sounds like the rear wheels would be coming off. But they are solid.
Nothing "hanging" or loose when I do a visual inspection.
Any help what went wrong much appreciated.
Christian
1979 Mercedes Benze 300SD Turbo Diesel
110,000 miles
Silver Exterior
Black Leather Interior
2 days ago, i ran over something in the driveway ... and I heard a "creak".
This morning when driving around a bend/curve or turning at any speed, I hear a loud CLUNK CLUNK CLUNK ... sounds like the rear wheels would be coming off. But they are solid.
Nothing "hanging" or loose when I do a visual inspection.
Any help what went wrong much appreciated.
Christian
1979 Mercedes Benze 300SD Turbo Diesel
110,000 miles
Silver Exterior
Black Leather Interior
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
06-04-2011, 10:52 AM #2sounds like a bad rear CV Axel
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
check the sway bar end links. I broke one and it would rub the axle on a turn. That and the cv joints
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
rear needs more rear sway bar and lower 2front 1 back minimum . or spacers and just those
nah it was lift , casing a rub on the top of the rim . it would contact above the bumpstop in the rear .when ever i get a rub thats not obvious i put a bunch of masking tape in the wells . this was with a set of 18x9 rears mandrus et was 42? fronts 18x8 et 37? never had probs in the front with these. the front spring contact was with a set of vw rim 17x7.5 et 32 i believe and just the edge of on of the wieghts that was on a bend . but the spring would settle past it after a day or 2. may car would sit on stand for at least a day at a time .springs scare the crap outta you when your banging a uturn. BIONG!BIONG! BIONG!
rear needs more rear sway bar and lower 2front 1 back minimum . or spacers and just those
3 Guest(s)
3 Guest(s)