STD Tuning Drivetrain heavy "clunk" when going into 1st when slowing down.

heavy "clunk" when going into 1st when slowing down.

heavy "clunk" when going into 1st when slowing down.

 
  • 0 Vote(s) - 0 Average
 
randomdude
GT2256V

106
06-25-2011, 07:16 PM #1
when i slow down to a stop, when it downshifts into first, i get a fairly heavy "clunk". the car does generaly shift a bit hard into second, and has a slight flare into 3/4. all which seems to be standard fare for these trans when they get a few miles on them. correct assumption? would a filter/flush/fill help? im sure i need to get the Msource pressure/setup kit and adjust it.

man that spring kit from smokedog&kens looks real nice, and sounds like it alleviates most of these issues. do you have to take the trans apart to install that?

thanks in advance Big Grin

cars? what cars? WHERE???
randomdude
06-25-2011, 07:16 PM #1

when i slow down to a stop, when it downshifts into first, i get a fairly heavy "clunk". the car does generaly shift a bit hard into second, and has a slight flare into 3/4. all which seems to be standard fare for these trans when they get a few miles on them. correct assumption? would a filter/flush/fill help? im sure i need to get the Msource pressure/setup kit and adjust it.

man that spring kit from smokedog&kens looks real nice, and sounds like it alleviates most of these issues. do you have to take the trans apart to install that?

thanks in advance Big Grin


cars? what cars? WHERE???

larsalan
Superturbo

1,272
06-25-2011, 08:31 PM #2
vacuum line is connected to the trans and VCV?

Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
larsalan
06-25-2011, 08:31 PM #2

vacuum line is connected to the trans and VCV?


Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'

led-panzer
Holset

541
06-25-2011, 08:38 PM #3
The clunk is the driveshaft center support. Very good idea to replace it soon, if it breaks completely you won't be going anywhere over 15mph ask me how I know Big Grin

1984 300D 4-speed ~200,000 miles
7.5mm M-pump, GT3582 turbo, F-Tune Performance intake/exhaust manifolds, A/A intercooler, 315 nozzles, Enlarged prechambers, Bosch 044 feed pump, Custom lightweight flywheel with 240mm clutch, Lowered, 17" AMG rims - 300 hp OM617 project
1985 300D 280,000 miles RIP
2001 F350 7.3 DP tuner, 4"exhaust, S&B intake
led-panzer
06-25-2011, 08:38 PM #3

The clunk is the driveshaft center support. Very good idea to replace it soon, if it breaks completely you won't be going anywhere over 15mph ask me how I know Big Grin


1984 300D 4-speed ~200,000 miles
7.5mm M-pump, GT3582 turbo, F-Tune Performance intake/exhaust manifolds, A/A intercooler, 315 nozzles, Enlarged prechambers, Bosch 044 feed pump, Custom lightweight flywheel with 240mm clutch, Lowered, 17" AMG rims - 300 hp OM617 project
1985 300D 280,000 miles RIP
2001 F350 7.3 DP tuner, 4"exhaust, S&B intake

randomdude
GT2256V

106
06-25-2011, 10:43 PM #4
good info! thanks.

where is the vcv please? and where should it connect at the trans? (my first benz).

cars? what cars? WHERE???
randomdude
06-25-2011, 10:43 PM #4

good info! thanks.

where is the vcv please? and where should it connect at the trans? (my first benz).


cars? what cars? WHERE???

larsalan
Superturbo

1,272
06-25-2011, 11:23 PM #5
[Image: VCV_3044.jpg]
I believe the vacuum line going to the top tees and one leg goes to the trans modulator.

find a good picture of the modulator somewhere
http://www.google.com/search?q=w123+tran...24&bih=495

It's tight between the body and trans. On the driver's side where you can just barely reach up to it and slide on the vacuum line or make a pressure adjustment.

Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
larsalan
06-25-2011, 11:23 PM #5

[Image: VCV_3044.jpg]
I believe the vacuum line going to the top tees and one leg goes to the trans modulator.

find a good picture of the modulator somewhere
http://www.google.com/search?q=w123+tran...24&bih=495

It's tight between the body and trans. On the driver's side where you can just barely reach up to it and slide on the vacuum line or make a pressure adjustment.


Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'

randomdude
GT2256V

106
06-26-2011, 02:14 AM #6
hrmmm sounds VERY interesting. does ANYONE have experiece with the MSOURCE adjustment kit then?

cars? what cars? WHERE???
randomdude
06-26-2011, 02:14 AM #6

hrmmm sounds VERY interesting. does ANYONE have experiece with the MSOURCE adjustment kit then?


cars? what cars? WHERE???

randomdude
GT2256V

106
06-30-2011, 02:02 PM #7
is there any other things it could be? is my transmission going to blow up? lol

cars? what cars? WHERE???
randomdude
06-30-2011, 02:02 PM #7

is there any other things it could be? is my transmission going to blow up? lol


cars? what cars? WHERE???

led-panzer
Holset

541
06-30-2011, 04:38 PM #8
Did ya crawl under and look at the center mount?

1984 300D 4-speed ~200,000 miles
7.5mm M-pump, GT3582 turbo, F-Tune Performance intake/exhaust manifolds, A/A intercooler, 315 nozzles, Enlarged prechambers, Bosch 044 feed pump, Custom lightweight flywheel with 240mm clutch, Lowered, 17" AMG rims - 300 hp OM617 project
1985 300D 280,000 miles RIP
2001 F350 7.3 DP tuner, 4"exhaust, S&B intake
led-panzer
06-30-2011, 04:38 PM #8

Did ya crawl under and look at the center mount?


1984 300D 4-speed ~200,000 miles
7.5mm M-pump, GT3582 turbo, F-Tune Performance intake/exhaust manifolds, A/A intercooler, 315 nozzles, Enlarged prechambers, Bosch 044 feed pump, Custom lightweight flywheel with 240mm clutch, Lowered, 17" AMG rims - 300 hp OM617 project
1985 300D 280,000 miles RIP
2001 F350 7.3 DP tuner, 4"exhaust, S&B intake

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 5 Guest(s)
Users browsing this thread:
 5 Guest(s)