road trip 2
road trip 2
![[Image: IMG00517-20110611-1245.jpg]](http://i88.photobucket.com/albums/k176/larsalan/IMG00517-20110611-1245.jpg)
![[Image: IMG_0387.jpg]](http://i88.photobucket.com/albums/k176/larsalan/IMG_0387.jpg)
![[Image: IMG_0390.jpg]](http://i88.photobucket.com/albums/k176/larsalan/IMG_0390.jpg)
![[Image: IMG_0392.jpg]](http://i88.photobucket.com/albums/k176/larsalan/IMG_0392.jpg)
![[Image: IMG_0391.jpg]](http://i88.photobucket.com/albums/k176/larsalan/IMG_0391.jpg)
![[Image: IMG_0388.jpg]](http://i88.photobucket.com/albums/k176/larsalan/IMG_0388.jpg)
![[Image: IMG_0396.jpg]](http://i88.photobucket.com/albums/k176/larsalan/IMG_0396.jpg)
![[Image: IMG_0393.jpg]](http://i88.photobucket.com/albums/k176/larsalan/IMG_0393.jpg)
![[Image: IMG_0394.jpg]](http://i88.photobucket.com/albums/k176/larsalan/IMG_0394.jpg)
![[Image: IMG_0395.jpg]](http://i88.photobucket.com/albums/k176/larsalan/IMG_0395.jpg)
First project, put those mufflers in storage and put on the ole four foot pipe.
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Yeah broken air cleaner mount. Maybe one day I can get rid of that ufo and have a long runner intake and exhaust header tied up to ball bearing turbo and a/w intercooler.
First project, put those mufflers in storage and put on the ole four foot pipe.
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
06-12-2011, 09:40 AM #5sweet new car looks nice!
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
(06-12-2011, 08:39 AM)larsalan ...
Supposed to be an '82 just like my last car but stuff is a little different.
Different tires, center console, turbo, etc.
It appears from the accessories/vacuum lines you have an 1985 motor installed your 1982. I can confirm if we have the engine serial number and perhaps the transmission.
Nice looking car though. You can SEM vinyl dye your dash blue so it will match your interior better. http://www.worlduph.com/vinylmbzlate.htm
.
Gota love Mercedes Diesels!
.
DeliveryValve
06-13-2011, 05:41 PM #6(06-12-2011, 08:39 AM)larsalan ...
Supposed to be an '82 just like my last car but stuff is a little different.
Different tires, center console, turbo, etc.
It appears from the accessories/vacuum lines you have an 1985 motor installed your 1982. I can confirm if we have the engine serial number and perhaps the transmission.
Nice looking car though. You can SEM vinyl dye your dash blue so it will match your interior better. http://www.worlduph.com/vinylmbzlate.htm
.
Gota love Mercedes Diesels!
.
It looks like it is from a smashed 85 then.
There is some weird vacuum thing on the turbo near the intake.
Also there is no air cond. and the hard line for it that crosses in front of the valve cover looks like it met a head-on collision.
Motor runs good and body looks nice. Title says it is a corrected/dup title.
Where is the engine serial? On the front of the block?
Will look for the trans # of the side by the pan.
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
That is quite a good guess.
It looks like it is from a smashed 85 then.
There is some weird vacuum thing on the turbo near the intake.
Also there is no air cond. and the hard line for it that crosses in front of the valve cover looks like it met a head-on collision.
Motor runs good and body looks nice. Title says it is a corrected/dup title.
Where is the engine serial? On the front of the block?
Will look for the trans # of the side by the pan.
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
(06-13-2011, 05:55 PM)larsalan ..
There is some weird vacuum thing on the turbo near the intake.
..
Yes that is the ARV - Air recirculating valve. Found on '84 cali and '85 cars. The accelerator linkages and Alda boost line makes it out as an '85.
.
Gota love Mercedes Diesels!
.
DeliveryValve
06-13-2011, 06:04 PM #8(06-13-2011, 05:55 PM)larsalan ..
There is some weird vacuum thing on the turbo near the intake.
..
Yes that is the ARV - Air recirculating valve. Found on '84 cali and '85 cars. The accelerator linkages and Alda boost line makes it out as an '85.
.
Gota love Mercedes Diesels!
.
huge mess and waste of $Also, there is some alignment crap that makes the car shake at about 60mph+
PO says it is track arm bushing or some such. l'll have to address that right away.
And, there is some knocking in the motor that didn't seem to be there before and it's only about half time. Tried to crack each injector but that didn't seem to locate the problem.
Oh, that knock was there before and after the valve adjustment. The noise is what prompted the procedure. And each valve was pinned to the cam so I guess it was good to let in a little gap.
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
First valve adjustment went well, they adjusted easily into place. But as I put those fuel return lines back onto the valve cover where there is a little clip, I tore one open and ended up spilling probably 5 gallons of fuel on a 350 mile trip huge mess and waste of $
Also, there is some alignment crap that makes the car shake at about 60mph+
PO says it is track arm bushing or some such. l'll have to address that right away.
And, there is some knocking in the motor that didn't seem to be there before and it's only about half time. Tried to crack each injector but that didn't seem to locate the problem.
Oh, that knock was there before and after the valve adjustment. The noise is what prompted the procedure. And each valve was pinned to the cam so I guess it was good to let in a little gap.
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
(06-24-2011, 10:04 PM)larsalan Also, there is some alignment crap that makes the car shake at about 60mph+
PO says it is track arm bushing or some such. l'll have to address that right away.
Yeah, ha.
Ive had 2 of these cars that shook like a MOFO from like 55-70ish, below or above that and they were fine. I never fixed the problem, and drove it like that for about a year. With no ill side effects besides scaring the crap out of passengers.
1987 300D: EGR Delete, ARV Delete, Cold Air Intake...
(06-24-2011, 10:04 PM)larsalan Also, there is some alignment crap that makes the car shake at about 60mph+
PO says it is track arm bushing or some such. l'll have to address that right away.
Yeah, ha.
Ive had 2 of these cars that shook like a MOFO from like 55-70ish, below or above that and they were fine. I never fixed the problem, and drove it like that for about a year. With no ill side effects besides scaring the crap out of passengers.
1987 300D: EGR Delete, ARV Delete, Cold Air Intake...
That knocking is the worst! I think I want to make one of those pop testers out of a bottle jack and have a try at tuning in the injectors. The motor for sure runs worst in just the few weeks I've had it
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
well of the bat, the front wheels were not at all balanced. I think now some replacement shocks and it will be quite nice. I was going just over 80 once the wheels were all balanced.
That knocking is the worst! I think I want to make one of those pop testers out of a bottle jack and have a try at tuning in the injectors. The motor for sure runs worst in just the few weeks I've had it
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Too stupid. I backed into a tree covered in brush today. Trying to park in the shade. Dented the trunk lid and had to replace the tail lens. Thankfully the body was sparred so all I need is the lid
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
ufo air filter housing is in the scrap pile. Got that fram 8037 and some abs pipe. Got a chance to feel the play on the turbo. This one is rock solid.
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Nothing infuriates me more. Driving about, stop at the atm, stop at the Chinese restaurant, stop at a friends house, get to the dog park and now she won't fucking stop!!
What seems to be the problem you bitch!
And it's raining and it's 95 degrees fuck it all.
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
This moody bitch won't shutoff now!!
Nothing infuriates me more. Driving about, stop at the atm, stop at the Chinese restaurant, stop at a friends house, get to the dog park and now she won't fucking stop!!
What seems to be the problem you bitch!
And it's raining and it's 95 degrees fuck it all.
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
07-07-2011, 08:36 PM #15Let her run!
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
If I can get a few spare $ I might want to plumb up a FMIC
So, power comes from more air and more fuel. If the fuel is just staying stock and the turbo is stock then what will the intercooler do?
It means more air, right? Cause it will be more dense. Anyway running the intercooler should be an performance upgrade, right?
And what is the best size? Not a itsy bitsy one for a civic and not a big boy from a powerstroke.
Is all that volume in the intercooler going to put in a bit more lag?
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Ok, I need some diesel 102 lessons.
If I can get a few spare $ I might want to plumb up a FMIC
So, power comes from more air and more fuel. If the fuel is just staying stock and the turbo is stock then what will the intercooler do?
It means more air, right? Cause it will be more dense. Anyway running the intercooler should be an performance upgrade, right?
And what is the best size? Not a itsy bitsy one for a civic and not a big boy from a powerstroke.
Is all that volume in the intercooler going to put in a bit more lag?
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
yankneck696
07-10-2011, 03:40 AM #18The intercooler should loower your intake temps, hence lower your EGTs, hence add longevity to your engine. Also, if you play with your pump, you will have that EGT buffer. It should not add much lag, as long as it is sized correctly. The only major issue is fitting it without hacking the bumper or looking stupid ;-)
looks like they are all about 25-31 in wide
then there are heights like 5, 7, 11in
and the thickness of like 3-5in.
Eventually I will have to ask how to plump it too. Is there any point in having a 3in inlet/outlet if the turbo is more like 2in.
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
So what is proper size? And what is that based on, engine displacement, turbo airflow?
looks like they are all about 25-31 in wide
then there are heights like 5, 7, 11in
and the thickness of like 3-5in.
Eventually I will have to ask how to plump it too. Is there any point in having a 3in inlet/outlet if the turbo is more like 2in.
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
maybe it needs a shim too?
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
For the intercooler, stay with a thinner model (2.5-3" thick), the thicker one looks cool but actually doesnt cool as well as the thin one. Also, if you can find a 2-2.5" in/out, that should be fine. If the in/out is 3", just neck it down to to fit a better size. With a stock pump, or even mildly tweaked stock pump, I don't think you are going to need a huge intercooler. Find the biggest one that will fit without having to hack stuff too bad. Just remember, the more air volume (IC size and tube size) the more it has to compress before getting boost. Even with a moderate IC, I doubt you will have too much lag.
82 300SD aka The Flyin Pumpkin (Gone): 7.5mm super M-pump, T3 60 trim turbo, Coldish air intake, A/W intercooler, propane injection, SW Boost and EGT gauges, Monark 265 nozzles, ported/polished cylinder head.
84 Euro 300D 4 sp: White with black trunk and hood. Blue cloth interior. Manual everything. 300DT front swaybar. C320 17" wheels. Now with the Flyin Pumpkins engine!
You can try just removing the ALDA from the injection pump, leaving the boost line connected. With no ALDA hooked up at all, see if you get any smoke. No black smoke currently could be as easy as you just have a clean intake manifold and the proper boost level already set.
For the intercooler, stay with a thinner model (2.5-3" thick), the thicker one looks cool but actually doesnt cool as well as the thin one. Also, if you can find a 2-2.5" in/out, that should be fine. If the in/out is 3", just neck it down to to fit a better size. With a stock pump, or even mildly tweaked stock pump, I don't think you are going to need a huge intercooler. Find the biggest one that will fit without having to hack stuff too bad. Just remember, the more air volume (IC size and tube size) the more it has to compress before getting boost. Even with a moderate IC, I doubt you will have too much lag.
82 300SD aka The Flyin Pumpkin (Gone): 7.5mm super M-pump, T3 60 trim turbo, Coldish air intake, A/W intercooler, propane injection, SW Boost and EGT gauges, Monark 265 nozzles, ported/polished cylinder head.
84 Euro 300D 4 sp: White with black trunk and hood. Blue cloth interior. Manual everything. 300DT front swaybar. C320 17" wheels. Now with the Flyin Pumpkins engine!
![[Image: photo-1.jpg]](http://i88.photobucket.com/albums/k176/larsalan/photo-1.jpg)
I thought I would crank up the max boost on the wastegate. What amount of boost can this stock turbo make? How much should I turn it up to?
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
With a FMIC on the way I am planning out the installation. I also have a new/old intake manifold all cleaned up.
I thought I would crank up the max boost on the wastegate. What amount of boost can this stock turbo make? How much should I turn it up to?
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Very nice looking car !!! Paint looks good ... congrats.
Ninth Year Anniversary with STD on 1-9-2020
visit: www.dieselfuelinjector.guru
Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.
RED W123 - left Germany as 240D in 1982. Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
Hey Larsalan,
Very nice looking car !!! Paint looks good ... congrats.
Ninth Year Anniversary with STD on 1-9-2020
visit: www.dieselfuelinjector.guru
Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.
RED W123 - left Germany as 240D in 1982. Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
It's not all that great but I have fun
So what about that boost? No egt gauge just trying not to have a melt down
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Oh, thanks. Was just doing some paint today too. Blacked out the head light bezels. And reblacked the grill.
It's not all that great but I have fun
So what about that boost? No egt gauge just trying not to have a melt down
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
10-23-2011, 11:27 PM #26Stock turbo? like 12lbs. 14 max
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
The FMIC installation is on hold because it's going to take some body cutting and needs some connectors and pipes that a beaucoup bucks.
![[Image: IMG_0692.jpg]](http://i88.photobucket.com/albums/k176/larsalan/IMG_0692.jpg)
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Custom skid plate? Found this old tractor panel in my forest. Think I should clean it up and see what it would take to fit it under the motor with a few bolts, cutting, brackets, repainting or whatever.
The FMIC installation is on hold because it's going to take some body cutting and needs some connectors and pipes that a beaucoup bucks.
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
![[Image: 0RoEi.jpg]](http://i.imgur.com/0RoEi.jpg)
[/img]there is that skid plate all mounted up and stuff
'84 300 SD w126 Race Car
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver
serverman777
11-12-2011, 03:19 PM #28[img][/img]
there is that skid plate all mounted up and stuff
'84 300 SD w126 Race Car
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
11-13-2011, 02:13 PM #29I want skid plates!!
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
'84 300 SD w126 Race Car
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver
serverman777
11-13-2011, 07:06 PM #30@larsalan You should drill a hole where the drain is for the oil pan. For you can just reach up there and take out the plug with out removing the plate. Then you can add a few more blots
'84 300 SD w126 Race Car
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
11-14-2011, 01:30 AM #31I plan to do a whole belly pan on mine. From front to rear diff. Should work out pretty easy
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
(11-06-2011, 07:52 AM)larsalan Custom skid plate? Found this old tractor panel in my forest. Think I should clean it up and see what it would take to fit it under the motor with a few bolts, cutting, brackets, repainting or whatever...
What are the dimensions of that plate?
Here is a shot of my w123 plate below. Dimensions of the plate itself (without the brackets are roughly 17inches front across, 13 inches rear across, 16.5 inches down the middle and 3.3mm thick.
.
(11-14-2011, 01:30 AM)Captain America I plan to do a whole belly pan on mine. From front to rear diff. Should work out pretty easy
You definitely need it. The pansy plate I have won't help you at all! LOL.
Be sure to post pics.
.
Gota love Mercedes Diesels!
.
DeliveryValve
11-14-2011, 04:07 PM #32(11-06-2011, 07:52 AM)larsalan Custom skid plate? Found this old tractor panel in my forest. Think I should clean it up and see what it would take to fit it under the motor with a few bolts, cutting, brackets, repainting or whatever...
What are the dimensions of that plate?
Here is a shot of my w123 plate below. Dimensions of the plate itself (without the brackets are roughly 17inches front across, 13 inches rear across, 16.5 inches down the middle and 3.3mm thick.
.
(11-14-2011, 01:30 AM)Captain America I plan to do a whole belly pan on mine. From front to rear diff. Should work out pretty easy
You definitely need it. The pansy plate I have won't help you at all! LOL.
Be sure to post pics.
.
Gota love Mercedes Diesels!
.
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
11-14-2011, 04:50 PM #33I have the same skid DV. But I am going to weld some plate to it for reinforcement, then continue it all the way to the back to protect the trans and rest of the drive train when I start off roading again haha
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
You can see it next to that shovel. We had to trim the back corners to let the steering shit move. Control arms or whatever they're called. I just have 2 bolts in it. One at the front and one at the rear. But, the leading edge is pretty well pinned into the body sheet metal.
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Dimensions? I dunno. It's not so much a skid plate as a aerodynamics plate in my mind. The steel is thin and doesn't have those reinforcing ribs like yours. It was just something to do.
You can see it next to that shovel. We had to trim the back corners to let the steering shit move. Control arms or whatever they're called. I just have 2 bolts in it. One at the front and one at the rear. But, the leading edge is pretty well pinned into the body sheet metal.
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
11-14-2011, 07:10 PM #35Are skid plates available commercially for w123's or are they a diy kind of thing??
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
'84 300 SD w126 Race Car
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver
serverman777
11-14-2011, 09:23 PM #37How much dose the stock ones cost?
'84 300 SD w126 Race Car
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver
(11-14-2011, 10:17 PM)aaa My off-the-wall guess would be 300 or something.
Not quite that much.
Prices came down recently from prices a few years ago.
$92 @ the Peach
http://catalog.peachparts.com/searchItem.epc
And at World Impex.
http://www.worldimpex.com/parts/mercedes...93945.html
If the radiator support is available (which is said to be NLA), plus the skid plate, then maybe $300 including shipping.
.
Gota love Mercedes Diesels!
.
DeliveryValve
11-14-2011, 10:44 PM #39(11-14-2011, 10:17 PM)aaa My off-the-wall guess would be 300 or something.
Not quite that much.
Prices came down recently from prices a few years ago.
$92 @ the Peach
http://catalog.peachparts.com/searchItem.epc
And at World Impex.
http://www.worldimpex.com/parts/mercedes...93945.html
If the radiator support is available (which is said to be NLA), plus the skid plate, then maybe $300 including shipping.
.
Gota love Mercedes Diesels!
.
(11-14-2011, 09:23 PM)serverman777 How much dose the stock ones cost?
The stock one they are talking about wont fit on your W126 though...
1981 Mercedes 300TD Lowered 4 speed manual Holset HX30
mike-81-240d
11-15-2011, 03:05 AM #40(11-14-2011, 09:23 PM)serverman777 How much dose the stock ones cost?
The stock one they are talking about wont fit on your W126 though...
1981 Mercedes 300TD Lowered 4 speed manual Holset HX30
(11-15-2011, 03:05 AM)mike-81-240dWell thats dumb.....(11-14-2011, 09:23 PM)serverman777 How much dose the stock ones cost?
The stock one they are talking about wont fit on your W126 though...
'84 300 SD w126 Race Car
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver
serverman777
11-15-2011, 08:46 AM #41(11-15-2011, 03:05 AM)mike-81-240dWell thats dumb.....(11-14-2011, 09:23 PM)serverman777 How much dose the stock ones cost?
The stock one they are talking about wont fit on your W126 though...
'84 300 SD w126 Race Car
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
11-15-2011, 04:57 PM #42Paid $90 for mine
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
11-16-2011, 01:08 AM #44So the Mercedes-built one just bolts right on? Or are there special brackets and stuff that are needed also
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
Part number 1265200442, was about $140.00.
Both w123 and w126 skid plates bolt on to existing mounting points on the body.
W123 oil pan plate with radiator plate that is NLA.
.
Gota love Mercedes Diesels!
.
DeliveryValve
11-16-2011, 04:00 AM #45The w126 plate is NLA.
Part number 1265200442, was about $140.00.
Both w123 and w126 skid plates bolt on to existing mounting points on the body.
W123 oil pan plate with radiator plate that is NLA.
.
Gota love Mercedes Diesels!
.
1981 Mercedes 300TD Lowered 4 speed manual Holset HX30
mike-81-240d
11-17-2011, 01:34 AM #46I have the oem W123 oil pan and radiator plates...
1981 Mercedes 300TD Lowered 4 speed manual Holset HX30
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Well shit, now my heater core is dumping coolant all over the floor. If I just don't run the heater do you think I can let it ride for a while?
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Just like cut the heater core out of the loop? Run some heater hose in place of that part of the loop?
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Sounds like a plan for now. Anyway you know anymore about that? Is the supply hose on the driver's side of the block right over the oil filter?
Just like cut the heater core out of the loop? Run some heater hose in place of that part of the loop?
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
04-08-2012, 03:36 AM #50I would just put a ball valve in the heater loop some place, I think that would be the simplest solution. Then after you get your heater core problem fixed, it would still be there for emergencies in case you ever had a problem again
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
31 Guest(s)
31 Guest(s)