EBay Alert Thread
EBay Alert Thread
12-01-2010, 11:48 AM
#101
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
12-01-2010, 11:48 AM #101I had a 1969 280se with a 4speed and fuel injection I loved that car!
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
12-06-2010, 09:17 AM
#102
VERY good deal on a GT2359V
ForcedInduction
12-06-2010, 09:17 AM
#102
http://cgi.ebay.com/ebaymotors/2005-2006...0626383070
VERY good deal on a GT2359V
12-06-2010, 01:24 PM
#103
Thanks for the headsup on that one!
Also, I just noticed your post time... haha!
82 300SD aka The Flyin Pumpkin (Gone): 7.5mm super M-pump, T3 60 trim turbo, Coldish air intake, A/W intercooler, propane injection, SW Boost and EGT gauges, Monark 265 nozzles, ported/polished cylinder head.
84 Euro 300D 4 sp: White with black trunk and hood. Blue cloth interior. Manual everything. 300DT front swaybar. C320 17" wheels. Now with the Flyin Pumpkins engine!
Now SOLD... to me.
Thanks for the headsup on that one!
Also, I just noticed your post time... haha!
82 300SD aka The Flyin Pumpkin (Gone): 7.5mm super M-pump, T3 60 trim turbo, Coldish air intake, A/W intercooler, propane injection, SW Boost and EGT gauges, Monark 265 nozzles, ported/polished cylinder head.
84 Euro 300D 4 sp: White with black trunk and hood. Blue cloth interior. Manual everything. 300DT front swaybar. C320 17" wheels. Now with the Flyin Pumpkins engine!
12-06-2010, 09:13 PM
#104
http://cgi.ebay.com/ebaymotors/PERFORMAN...ccessories
Tell me whats wrong here bwah ha ha ha!
http://cgi.ebay.com/ebaymotors/GARRETT-T...ccessories
This post was last modified: 12-06-2010, 09:37 PM by willbhere4u.
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
12-06-2010, 09:13 PM #104performance turbo for 300sdl
http://cgi.ebay.com/ebaymotors/PERFORMAN...ccessories
Tell me whats wrong here bwah ha ha ha!
http://cgi.ebay.com/ebaymotors/GARRETT-T...ccessories
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
12-07-2010, 12:02 PM
#105
(12-06-2010, 09:13 PM)willbhere4u Tell me whats wrong here bwah ha ha ha!
http://cgi.ebay.com/ebaymotors/GARRETT-T...ccessories
Oh, jeez, where to start....
Hahahahaa!
82 300SD aka The Flyin Pumpkin (Gone): 7.5mm super M-pump, T3 60 trim turbo, Coldish air intake, A/W intercooler, propane injection, SW Boost and EGT gauges, Monark 265 nozzles, ported/polished cylinder head.
84 Euro 300D 4 sp: White with black trunk and hood. Blue cloth interior. Manual everything. 300DT front swaybar. C320 17" wheels. Now with the Flyin Pumpkins engine!
(12-06-2010, 09:13 PM)willbhere4u Tell me whats wrong here bwah ha ha ha!
http://cgi.ebay.com/ebaymotors/GARRETT-T...ccessories
Oh, jeez, where to start....
Hahahahaa!
82 300SD aka The Flyin Pumpkin (Gone): 7.5mm super M-pump, T3 60 trim turbo, Coldish air intake, A/W intercooler, propane injection, SW Boost and EGT gauges, Monark 265 nozzles, ported/polished cylinder head.
84 Euro 300D 4 sp: White with black trunk and hood. Blue cloth interior. Manual everything. 300DT front swaybar. C320 17" wheels. Now with the Flyin Pumpkins engine!
12-07-2010, 01:17 PM
#107
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
12-07-2010, 01:17 PM #107interesting turbo roto master t3/t4 http://cgi.ebay.com/ebaymotors/Garrett-R...ccessories
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
12-09-2010, 10:03 PM
#108
http://denver.craigslist.org/cto/2104789910.html
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
12-09-2010, 10:03 PM #108cheap G wagon!
http://denver.craigslist.org/cto/2104789910.html
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
12-17-2010, 07:40 PM
#109
http://cgi.ebay.com/ebaymotors/ws/eBayIS...NA:US:1123
Is it any good for a MB motor?
Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
here's a turbo off a 4bt. Get that jBidwatcher and you might win it for a song.
http://cgi.ebay.com/ebaymotors/ws/eBayIS...NA:US:1123
Is it any good for a MB motor?
Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
02-06-2011, 11:28 PM
#111
(02-05-2011, 07:45 AM)ForcedInduction http://cgi.ebay.com/ebaymotors/Holset-HX...0766782861Its already been relisted. I dont think it has a WG.
HX30
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
(02-05-2011, 07:45 AM)ForcedInduction http://cgi.ebay.com/ebaymotors/Holset-HX...0766782861Its already been relisted. I dont think it has a WG.
HX30
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
02-21-2011, 09:58 AM
#112
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
he341ve? Pricey. http://cgi.ebay.com/ebaymotors/ws/eBayIS...500wt_1182
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
02-21-2011, 02:42 PM
#113
(02-21-2011, 09:58 AM)winmutt he341ve? Pricey.
Extremely pricey, you can buy it NEW from cummins for $200 less!
ForcedInduction
02-21-2011, 02:42 PM
#113
(02-21-2011, 09:58 AM)winmutt he341ve? Pricey.
Extremely pricey, you can buy it NEW from cummins for $200 less!
03-26-2011, 08:26 AM
#115
http://cgi.ebay.com/ebaymotors/1979-Merc...221e#v4-37
Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
g wagon
http://cgi.ebay.com/ebaymotors/1979-Merc...221e#v4-37
Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
03-29-2011, 01:20 PM
#117
http://cgi.ebay.co.uk/NEW-Mercedes-Manua...500wt_1156
Local pickup only
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
NIB NWT 5 speed...........
http://cgi.ebay.co.uk/NEW-Mercedes-Manua...500wt_1156
Local pickup only
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
03-31-2011, 01:12 AM
#118
www.groupon.com/deals/ebay/?affiliate_id=EBAYDEAL&utm_source=EBAY&utm_medium=CPC&utm_campaign=OTHER7
Ich liebe meine Autos!
1981 Mercedes-Benz 300SD | 156K Miles | 2nd Owner | EGR Disabled [Removal Pending] | ALDA Removed | Straight Pipes | GT2256V??? | Laser Interceptor | Engine swap over summer, hopefully with GT2256V attached...
1981 Mercedes-Benz 300SD | Odo Stopped at 160K (at least 50K more) | EGR Disabled | ALDA All The Way Out | Straight pipes | FM-870 Remote Start Alarm System | B100 Biodiesel | AC Fixed x2 | Trunk crushed in
| Retired to garage.Excessive speeding? It ain't excessive till I redline!
not car related, but $15 ebay gift card for $7
www.groupon.com/deals/ebay/?affiliate_id=EBAYDEAL&utm_source=EBAY&utm_medium=CPC&utm_campaign=OTHER7
Ich liebe meine Autos!
1981 Mercedes-Benz 300SD | 156K Miles | 2nd Owner | EGR Disabled [Removal Pending] | ALDA Removed | Straight Pipes | GT2256V??? | Laser Interceptor | Engine swap over summer, hopefully with GT2256V attached...
1981 Mercedes-Benz 300SD | Odo Stopped at 160K (at least 50K more) | EGR Disabled | ALDA All The Way Out | Straight pipes | FM-870 Remote Start Alarm System | B100 Biodiesel | AC Fixed x2 | Trunk crushed in
| Retired to garage.Excessive speeding? It ain't excessive till I redline!
04-09-2011, 08:45 AM
#119
1982 300SD: 304,xxx Super M-pump with 7.5mm elements, 265 Nozzles, GT35 water cooled turbo, M90 Supercharger, A/W Intercooler, Serpentine drive belt, 3" SS exhaust with Magnaflow muffler, 240 breather, AEM dry Filter, Manual Boost Control, EGT / Boost / EMP gauges....Moved on to other projects
1995 F-350 7.3L PSD: 230,xxx 6.0 IC, DIY Stage 1 Injectors, 17* hpop, Tony Wildman Chip, John Wood Trans, 6.4L TC, 3" down pipe, 4" straight exhaust, 310 HP on wheel dyno - 8500# dually: 0-60 in 6.98
Suzuki Samurai: VW 1.9L TD, Trackick doubler transfer case (made by me) 5.8:1 transfer case gears, YJ springs front and rear with rear missing links, wheel base extended 14", diffs welded, some day a VNT.
Rudolf_Diesel
04-09-2011, 08:45 AM #119http://cgi.ebay.com/ebaymotors/ws/eBayIS...0589379415
1982 300SD: 304,xxx Super M-pump with 7.5mm elements, 265 Nozzles, GT35 water cooled turbo, M90 Supercharger, A/W Intercooler, Serpentine drive belt, 3" SS exhaust with Magnaflow muffler, 240 breather, AEM dry Filter, Manual Boost Control, EGT / Boost / EMP gauges....Moved on to other projects
1995 F-350 7.3L PSD: 230,xxx 6.0 IC, DIY Stage 1 Injectors, 17* hpop, Tony Wildman Chip, John Wood Trans, 6.4L TC, 3" down pipe, 4" straight exhaust, 310 HP on wheel dyno - 8500# dually: 0-60 in 6.98
Suzuki Samurai: VW 1.9L TD, Trackick doubler transfer case (made by me) 5.8:1 transfer case gears, YJ springs front and rear with rear missing links, wheel base extended 14", diffs welded, some day a VNT.
04-11-2011, 01:13 AM
#120
1981 Mercedes 300TD Lowered 4 speed manual Holset HX30
mike-81-240d
04-11-2011, 01:13 AM #120http://cgi.ebay.com/ebaymotors/ws/eBayIS...9290630864
1981 Mercedes 300TD Lowered 4 speed manual Holset HX30
04-15-2011, 11:35 AM
#121
Right nearby too
http://cgi.ebay.com/ebaymotors/ws/eBayIS...AUS%3A1123
Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Too bad I don't have any $. 600 for this w116
Right nearby too
http://cgi.ebay.com/ebaymotors/ws/eBayIS...AUS%3A1123
Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
04-24-2011, 11:09 AM
#122
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
04-24-2011, 11:09 AM #122sprinter 5spd http://cgi.ebay.com/ebaymotors/Non-US-Ma...ccessories
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
04-24-2011, 12:41 PM
#123
(04-24-2011, 11:09 AM)willbhere4u sprinter 5spd http://cgi.ebay.com/ebaymotors/Non-US-Ma...ccessories
an hour later its gone??
(04-24-2011, 11:09 AM)willbhere4u sprinter 5spd http://cgi.ebay.com/ebaymotors/Non-US-Ma...ccessories
an hour later its gone??
04-24-2011, 07:49 PM
#124
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
04-24-2011, 07:49 PM #124damn that was fast
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
05-04-2011, 05:06 PM
#125
http://cgi.ebay.com/ebaymotors/MERCEDES-...2eb4f8bb73
Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
too bad I am broke, man I gotta get the funds up. A manual limo would be even better than a wagon.
http://cgi.ebay.com/ebaymotors/MERCEDES-...2eb4f8bb73
Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
05-08-2011, 11:17 AM
#126
Found a 300GD 5 speed trans, on Germany ebay for lots of money plus more for shipping.
http://cgi.ebay.de/MERCEDES-G-300GD-5-GA...3a65bc44a2
82 300SD aka The Flyin Pumpkin (Gone): 7.5mm super M-pump, T3 60 trim turbo, Coldish air intake, A/W intercooler, propane injection, SW Boost and EGT gauges, Monark 265 nozzles, ported/polished cylinder head.
84 Euro 300D 4 sp: White with black trunk and hood. Blue cloth interior. Manual everything. 300DT front swaybar. C320 17" wheels. Now with the Flyin Pumpkins engine!
That is a sweeeet limo!! Already sold. I did't have the money for it anyways. LOL
Found a 300GD 5 speed trans, on Germany ebay for lots of money plus more for shipping.
http://cgi.ebay.de/MERCEDES-G-300GD-5-GA...3a65bc44a2
82 300SD aka The Flyin Pumpkin (Gone): 7.5mm super M-pump, T3 60 trim turbo, Coldish air intake, A/W intercooler, propane injection, SW Boost and EGT gauges, Monark 265 nozzles, ported/polished cylinder head.
84 Euro 300D 4 sp: White with black trunk and hood. Blue cloth interior. Manual everything. 300DT front swaybar. C320 17" wheels. Now with the Flyin Pumpkins engine!
05-09-2011, 09:56 PM
#127
http://cgi.ebay.com/ebaymotors/1976-Merc...27bae33d24
Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Does it seem like they missed a '0' on this gasser? as in $7750 not $775
http://cgi.ebay.com/ebaymotors/1976-Merc...27bae33d24
Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
05-11-2011, 08:54 AM
#129
Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
I couldn't tell. They quote what the value is of that model is and it is pretty old. Seems like a fun little car for $775 if it is close to mechanically sound.
Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
06-08-2011, 09:36 AM
#130
HE341VE core.
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
http://cgi.ebay.com/ebaymotors/ws/eBayIS...4&viewitem=
HE341VE core.
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
06-08-2011, 12:22 PM
#131
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
You can buy a good one for that.
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
07-22-2011, 10:04 AM
#132
HX30 needs a rebuild. This should be a very suitable t3 flanged mild upgrade.
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
http://cgi.ebay.com/ebaymotors/ws/eBayIS...6&viewitem=
HX30 needs a rebuild. This should be a very suitable t3 flanged mild upgrade.
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
08-03-2011, 07:56 AM
#133
Holset HE351VE
http://cgi.ebay.com/ebaymotors/Holset-Tu..._500wt_956
This post was last modified: 08-03-2011, 07:56 AM by iheartboost.
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
iheartboost
08-03-2011, 07:56 AM #133not sure if this is a common used turbo here or not but i dont think the price is bad
Holset HE351VE
http://cgi.ebay.com/ebaymotors/Holset-Tu..._500wt_956
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
08-03-2011, 09:55 AM
#135
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
iheartboost
08-03-2011, 09:55 AM #135oh :/ oh well.
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
08-27-2011, 04:34 AM
#136
Its not mine i just use it width great result.
http://cgi.ebay.com/ebaymotors/ws/eBayIS...500wt_1182
My messurement
0.3 bar at 2000 RPM (EGP 0,8)
1.0 bar at 2500 RPM (EGP 1,3)
1.5 bar at 2700 RPM (EGP 1,8)
1.8 bar at 3000 RPM (EGP 2,1)
2.0 bar at 3200 RPM (EGP 2,1)
holding 2.0 bar all the way to 5500 RPM (120,000 Turbo RPM)
I think around 350 - 370 HP
Ole
1996 MB SL320 Now OM606 7 mm pump elements (myna), KKD manifold, HE341VE, 3,5" downpipe, 3" exhaust, big IC, 722.6 gearbox controller, also controls (Turbo VNT, EGT, BOOST, EGP.)
Just if you need a good turbo for you OM603 or OM606
Its not mine i just use it width great result.
http://cgi.ebay.com/ebaymotors/ws/eBayIS...500wt_1182
My messurement
0.3 bar at 2000 RPM (EGP 0,8)
1.0 bar at 2500 RPM (EGP 1,3)
1.5 bar at 2700 RPM (EGP 1,8)
1.8 bar at 3000 RPM (EGP 2,1)
2.0 bar at 3200 RPM (EGP 2,1)
holding 2.0 bar all the way to 5500 RPM (120,000 Turbo RPM)
I think around 350 - 370 HP
Ole
1996 MB SL320 Now OM606 7 mm pump elements (myna), KKD manifold, HE341VE, 3,5" downpipe, 3" exhaust, big IC, 722.6 gearbox controller, also controls (Turbo VNT, EGT, BOOST, EGP.)
08-27-2011, 09:25 AM
#137
WHY DONT I HAVE MONEY!
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
iheartboost
08-27-2011, 09:25 AM #137omg.... want it so bad lol.
WHY DONT I HAVE MONEY!
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
08-29-2011, 01:34 AM
#140
(08-28-2011, 02:21 PM)winmutt Its basically the same size as a HE351...
ohh.... :/ man I dont know my holset turbos
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
iheartboost
08-29-2011, 01:34 AM #140(08-28-2011, 02:21 PM)winmutt Its basically the same size as a HE351...
ohh.... :/ man I dont know my holset turbos
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
08-29-2011, 11:58 AM
#141
(08-29-2011, 01:34 AM)iheartboostYes the physically overall size is almost the same,(08-28-2011, 02:21 PM)winmutt Its basically the same size as a HE351...
ohh.... :/ man I dont know my holset turbos
But the HE341VE has compressor wheel like HX35
the HE351VE has compressor wheel like HX40
The HE341 hit 1,5 bar 800 RPM before
Now width the HE341VE
0.3 bar at 2000 RPM (EGP 0,5)
0.5 bar at 2200 RPM (EGP 0,8)
1.0 bar at 2500 RPM (EGP 1,3)
1.5 bar at 2700 RPM (EGP 1,8)
1.8 bar at 3000 RPM (EGP 2,1)
2.0 bar at 3100 RPM (EGP 2,2)
holding 2.0 bar all the way to 5500 RPM (120,000 Turbo RPM)
Before width the HE351VE
0.5 bar at 2500 RPM (EGP 0,8)
1.0 bar at 3000 RPM (EGP 1,3)
1.5 bar at 3500 RPM (EGP 1,8)
1.8 bar at 3700 RPM (EGP 2,1)
1.8 bar at 5000 RPM (EGP 2,1) (95,000 Turbo RPM)
1996 MB SL320 Now OM606 7 mm pump elements (myna), KKD manifold, HE341VE, 3,5" downpipe, 3" exhaust, big IC, 722.6 gearbox controller, also controls (Turbo VNT, EGT, BOOST, EGP.)
(08-29-2011, 01:34 AM)iheartboostYes the physically overall size is almost the same,(08-28-2011, 02:21 PM)winmutt Its basically the same size as a HE351...
ohh.... :/ man I dont know my holset turbos
But the HE341VE has compressor wheel like HX35
the HE351VE has compressor wheel like HX40
The HE341 hit 1,5 bar 800 RPM before
Now width the HE341VE
0.3 bar at 2000 RPM (EGP 0,5)
0.5 bar at 2200 RPM (EGP 0,8)
1.0 bar at 2500 RPM (EGP 1,3)
1.5 bar at 2700 RPM (EGP 1,8)
1.8 bar at 3000 RPM (EGP 2,1)
2.0 bar at 3100 RPM (EGP 2,2)
holding 2.0 bar all the way to 5500 RPM (120,000 Turbo RPM)
Before width the HE351VE
0.5 bar at 2500 RPM (EGP 0,8)
1.0 bar at 3000 RPM (EGP 1,3)
1.5 bar at 3500 RPM (EGP 1,8)
1.8 bar at 3700 RPM (EGP 2,1)
1.8 bar at 5000 RPM (EGP 2,1) (95,000 Turbo RPM)
1996 MB SL320 Now OM606 7 mm pump elements (myna), KKD manifold, HE341VE, 3,5" downpipe, 3" exhaust, big IC, 722.6 gearbox controller, also controls (Turbo VNT, EGT, BOOST, EGP.)
08-30-2011, 02:42 AM
#143
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
I won another hy35 for 170$ lol.
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
08-30-2011, 11:59 AM
#145
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
No but my friend has one too. Are there different hy35s? All 3 have the 9cm housing.
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
08-30-2011, 12:21 PM
#146
(08-30-2011, 11:59 AM)dieselboy No but my friend has one too. Are there different hy35s? All 3 have the 9cm housing.Seems like most holsets came in a variety of sizes which is why I was asking you. What exactly is meant by 9cm hosuing? Is that the compressor or turbine? Just measuring diameter?
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
(08-30-2011, 11:59 AM)dieselboy No but my friend has one too. Are there different hy35s? All 3 have the 9cm housing.Seems like most holsets came in a variety of sizes which is why I was asking you. What exactly is meant by 9cm hosuing? Is that the compressor or turbine? Just measuring diameter?
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
08-30-2011, 02:19 PM
#147
I'll look into it more.
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
Iirc it's the area 9cm3 of the turbine inlet.
I'll look into it more.
-Jesse
80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon
10 mistsubishi fuso service truck.
09-02-2011, 03:30 AM
#148
http://www.ebay.com/itm/Bosch-Test-instr...2311efc848
This post was last modified: 09-02-2011, 03:30 AM by Kozuka.
Bosch M injection pump manual
http://www.ebay.com/itm/Bosch-Test-instr...2311efc848
09-02-2011, 02:15 PM
#149
http://cgi.ebay.com/ebaymotors/BOSCH-DIE...500wt_1182
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
OMG who says you need a 100k$ machine for bench testing? This one was $0.99!!!!
http://cgi.ebay.com/ebaymotors/BOSCH-DIE...500wt_1182
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
09-02-2011, 08:27 PM
#150
but they guy said it cost 2450.
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
iheartboost
09-02-2011, 08:27 PM #150lol it says it will end early if it sells. not sure if you were joking or what.
but they guy said it cost 2450.
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
Users browsing this thread:
49 Guest(s)
49 Guest(s)
Users browsing this thread:
49 Guest(s)
49 Guest(s)