Wade Performance Intake Kits
Wade Performance Intake Kits
08-16-2011, 01:50 PM
#1
This is the url to the company: http://wadeperformanceproducts.com/
So I was surfing the web for parts for my 1979 Mercedes-Benz 300SD, and I came across a company called "Wade Performance Products". They manufacture performance air intake kits for different diesel mercedes models. & I was wondering if anyone has ever heard of this company before? Is it true performance or just a bunch of money wasting crap? I'd like to hear y'alls opinions. Thanks guys.
This is the url to the company: http://wadeperformanceproducts.com/
08-16-2011, 04:41 PM
#3
ill probably just end up putting maybe a small amount of tubing to run pcv and vac lines. but other than that there will be almost no intake.
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
iheartboost
08-16-2011, 04:41 PM #3meh. on my cobalt yea. i forked over the money for an intake. on the merc with it being forced induction it dosent matter to much.
ill probably just end up putting maybe a small amount of tubing to run pcv and vac lines. but other than that there will be almost no intake.
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
08-16-2011, 04:51 PM
#4
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
08-16-2011, 04:51 PM #4Just like www.monstercraftsman.net
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
08-16-2011, 05:05 PM
#5
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
iheartboost
08-16-2011, 05:05 PM #5HOLY HELL! 160 for a fucking tube and filter. yeaa.... ill go make my own for 5 bucks and be happy.
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
08-18-2011, 07:04 AM
#7
The stock filter system flows almost 2x what the engine can.
Paper filters > gauze.
Don't use gauze filters on a diesel.
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
Where is ForcedInduction when you need him?
The stock filter system flows almost 2x what the engine can.
Paper filters > gauze.
Don't use gauze filters on a diesel.
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
08-18-2011, 09:24 AM
#8
(08-17-2011, 02:55 AM)98taco3 Fit one out of a Dodge Ram into my car lol. Fit perfectly, didnt even have to cut it.
What year dodge ram?
I've got a 240d oil separator waiting to go in the car... I'm just tired of the stock air box rattling in the engine compartment... I was going to do the tube/paper filter route pieced from one of those sceptre kits but if a stock dodge airbox fits that might work better haha...
'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
(08-17-2011, 02:55 AM)98taco3 Fit one out of a Dodge Ram into my car lol. Fit perfectly, didnt even have to cut it.
What year dodge ram?
I've got a 240d oil separator waiting to go in the car... I'm just tired of the stock air box rattling in the engine compartment... I was going to do the tube/paper filter route pieced from one of those sceptre kits but if a stock dodge airbox fits that might work better haha...
'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
08-18-2011, 09:59 AM
#10
your intake gets seriously dirty. my next mod before anything else is gonna be a dam catch can.
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
iheartboost
08-18-2011, 09:59 AM #10yea. and when you have a good amount of blow by like <-- this guy.
your intake gets seriously dirty. my next mod before anything else is gonna be a dam catch can.
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
08-18-2011, 04:36 PM
#11
I had A LOT of blowby and after running her hard almost ALL of it went away. You should be able to find the video in my projects thread. The cap used to try and jump off the VC and now it doesnt even move
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
08-18-2011, 04:36 PM #11Fuck the catch can. Dump the blowby to the ground and run her HARD!
I had A LOT of blowby and after running her hard almost ALL of it went away. You should be able to find the video in my projects thread. The cap used to try and jump off the VC and now it doesnt even move
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
08-18-2011, 06:08 PM
#12
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
iheartboost
08-18-2011, 06:08 PM #12Hmmmm... Ill think about it lol
1998 E300TD 7.5mm pump and hx35 to come!
00 Mustang gt drift car
08-18-2011, 06:11 PM
#13
08 Ram Cummins 6.7 Mega Cab 4wd Beauty & Towing Mods, 97 Ram Cummins 5.9 Extended Cab 4wd. Engine, Tansmission, and Funtional Mods, 90 Suburban 4wd Stock, 83 300D Pats Car, 80 300CD in Restoration and Fabrication Process( was non turbo...now Turbo
) 75 Ramcharger 4wd Someday Cummins Power Project
Oil Burner
08-18-2011, 06:11 PM #13If these kits had some kind of heat shield box that directed air right from the factory intake "Scoop" on the radiator support they would be nice other wise I agree it looks nice but not really worth it...however I did like the exhaust maniflod and turbo heat wrap thats nice!
08 Ram Cummins 6.7 Mega Cab 4wd Beauty & Towing Mods, 97 Ram Cummins 5.9 Extended Cab 4wd. Engine, Tansmission, and Funtional Mods, 90 Suburban 4wd Stock, 83 300D Pats Car, 80 300CD in Restoration and Fabrication Process( was non turbo...now Turbo
) 75 Ramcharger 4wd Someday Cummins Power Project
08-19-2011, 07:52 PM
#14
Once upon a time, an "old-timer" at a Rolex store looked astonished as a customer asked to have his Rolex watch upgraded with a better movement. "I get him now".
If you are doing it for the hobby and personal joy of tinkering around then do what suits you and disregard us all. There is always this HUGE part inside of me that wants to destroy and rearrange things. I am slowly moderating that urge. It has cost me too much money.
I elaborate further that what matters is the joy that u will get out of what you do. If you want a LOUD turbo whistle, then YES do it. No performance gained though.
This post was last modified: 08-19-2011, 07:56 PM by smoke026.
Enjoy the beauty of well engineered things. Leave it alone. Now, if you are planning on making a full on drag car then an air cleaner should be the last of your worries. Don't ask me how I know.
Once upon a time, an "old-timer" at a Rolex store looked astonished as a customer asked to have his Rolex watch upgraded with a better movement. "I get him now".
If you are doing it for the hobby and personal joy of tinkering around then do what suits you and disregard us all. There is always this HUGE part inside of me that wants to destroy and rearrange things. I am slowly moderating that urge. It has cost me too much money.
I elaborate further that what matters is the joy that u will get out of what you do. If you want a LOUD turbo whistle, then YES do it. No performance gained though.
08-20-2011, 01:39 AM
#15
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
08-20-2011, 01:39 AM #15Just remove the dam fog light for TRUE cold air induction
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
08-22-2011, 04:39 PM
#16
(08-20-2011, 01:39 AM)Captain America Just remove the dam fog light for TRUE cold air induction
Hard to do with euro's...
I did the fram 8038, and a spectre 3 to 2.5 reducer... I think I lost power on the low end, but made a little tiny bit above 3k.
The sound was worth it tho.
My blow by is routed directly into the intake pre turbo. I had it running to the ground, but it smelled disgusting, and gave me headaches.
1981 Mercedes 300TD Lowered 4 speed manual Holset HX30
mike-81-240d
08-22-2011, 04:39 PM #16(08-20-2011, 01:39 AM)Captain America Just remove the dam fog light for TRUE cold air induction
Hard to do with euro's...
I did the fram 8038, and a spectre 3 to 2.5 reducer... I think I lost power on the low end, but made a little tiny bit above 3k.
The sound was worth it tho.
My blow by is routed directly into the intake pre turbo. I had it running to the ground, but it smelled disgusting, and gave me headaches.
1981 Mercedes 300TD Lowered 4 speed manual Holset HX30
08-22-2011, 11:21 PM
#17
And to get the trash can out of the engine bay!
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
08-22-2011, 11:21 PM #17The sound alone is worth it to me also
And to get the trash can out of the engine bay!
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
08-23-2011, 04:08 PM
#18
(08-22-2011, 11:21 PM)Captain America The sound alone is worth it to me also
And to get the trash can out of the engine bay!
Funny.
Here is something i have been playing with:
Off an 87 Saab 900:
Paid $10.00
Supposedly a steal on this vehicles.
![[Image: 10h2i3d.jpg]](http://i53.tinypic.com/10h2i3d.jpg)
Her is my idea.
Will mod/cut the inlet duct of an old W116 (as can be seen on pic) as the feed to the turbo with a silicone coupler of course. It is amazing how snug it mounts into that unique Saab exit. This thing fits perfect behind the front light and it is concealed and will have true cold air from the OEM scoop!. The wix filter I plan on using is rated at 315 CFM's. The OM617 Turbo according to F.I should be minimum 274 cfm @ 4500rpm and 9psi boost at 0 altitude so hopefully it should be fine.
![[Image: 2jb9xf7.jpg]](http://i52.tinypic.com/2jb9xf7.jpg)
Im still in favor of the stock UFO (trash can), as far as COLD induction is concerned but dont like that the turbo is right underneath and not easily accessible. I will make both air cleaners work and rotate them around.
This post was last modified: 08-23-2011, 04:20 PM by smoke026.
(08-22-2011, 11:21 PM)Captain America The sound alone is worth it to me also
And to get the trash can out of the engine bay!
Funny.
Here is something i have been playing with:
Off an 87 Saab 900:
Paid $10.00
Supposedly a steal on this vehicles.
Her is my idea.
Will mod/cut the inlet duct of an old W116 (as can be seen on pic) as the feed to the turbo with a silicone coupler of course. It is amazing how snug it mounts into that unique Saab exit. This thing fits perfect behind the front light and it is concealed and will have true cold air from the OEM scoop!. The wix filter I plan on using is rated at 315 CFM's. The OM617 Turbo according to F.I should be minimum 274 cfm @ 4500rpm and 9psi boost at 0 altitude so hopefully it should be fine.
Im still in favor of the stock UFO (trash can), as far as COLD induction is concerned but dont like that the turbo is right underneath and not easily accessible. I will make both air cleaners work and rotate them around.
08-23-2011, 04:23 PM
#19
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
08-23-2011, 04:23 PM #19You could proby do a nice heat shield under the trash can to help a lot! just coat the whole damn thing in layers of aluminum foil hahahahahah
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
08-24-2011, 06:05 PM
#20
(08-19-2011, 07:52 PM)smoke026 Enjoy the beauty of well engineered things. Leave it alone. Now, if you are planning on making a full on drag car then an air cleaner should be the last of your worries. Don't ask me how I know.
Once upon a time, an "old-timer" at a Rolex store looked astonished as a customer asked to have his Rolex watch upgraded with a better movement. "I get him now".
If you are doing it for the hobby and personal joy of tinkering around then do what suits you and disregard us all. There is always this HUGE part inside of me that wants to destroy and rearrange things. I am slowly moderating that urge. It has cost me too much money.
I elaborate further that what matters is the joy that u will get out of what you do. If you want a LOUD turbo whistle, then YES do it. No performance gained though.
You're right, I highly agree with your point of view. Well said.
This post was last modified: 08-24-2011, 06:05 PM by CJP28.
(08-19-2011, 07:52 PM)smoke026 Enjoy the beauty of well engineered things. Leave it alone. Now, if you are planning on making a full on drag car then an air cleaner should be the last of your worries. Don't ask me how I know.
Once upon a time, an "old-timer" at a Rolex store looked astonished as a customer asked to have his Rolex watch upgraded with a better movement. "I get him now".
If you are doing it for the hobby and personal joy of tinkering around then do what suits you and disregard us all. There is always this HUGE part inside of me that wants to destroy and rearrange things. I am slowly moderating that urge. It has cost me too much money.
I elaborate further that what matters is the joy that u will get out of what you do. If you want a LOUD turbo whistle, then YES do it. No performance gained though.
You're right, I highly agree with your point of view. Well said.
08-25-2011, 12:06 AM
#21
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
08-25-2011, 12:06 AM #21Have fun stockers with your boring mercedes. I'll be flying by with a fat grin on my face, may even hit a sweet jump lol
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
08-26-2011, 09:18 AM
#22
...Modify, Break, Fix, Improve, Live Happy...My Philosophy
08 Ram Cummins 6.7 Mega Cab 4wd Beauty & Towing Mods, 97 Ram Cummins 5.9 Extended Cab 4wd. Engine, Tansmission, and Funtional Mods, 90 Suburban 4wd Stock, 83 300D Pats Car, 80 300CD in Restoration and Fabrication Process( was non turbo...now Turbo
) 75 Ramcharger 4wd Someday Cummins Power Project
Oil Burner
08-26-2011, 09:18 AM #22Where's the fun when you leave your car alone, untouched, virginized, BORING...Modify, Break, Fix, Improve, Live Happy...My Philosophy
08 Ram Cummins 6.7 Mega Cab 4wd Beauty & Towing Mods, 97 Ram Cummins 5.9 Extended Cab 4wd. Engine, Tansmission, and Funtional Mods, 90 Suburban 4wd Stock, 83 300D Pats Car, 80 300CD in Restoration and Fabrication Process( was non turbo...now Turbo
) 75 Ramcharger 4wd Someday Cummins Power Project
08-26-2011, 12:24 PM
#23
(08-26-2011, 09:18 AM)Oil Burner Modify, Break, Fix, Improve, Live Happy...My Philosophy
Yup!
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
08-26-2011, 12:24 PM #23(08-26-2011, 09:18 AM)Oil Burner Modify, Break, Fix, Improve, Live Happy...My Philosophy
Yup!
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
08-26-2011, 06:29 PM
#24
I'm not afraid to push limits or hack cars up. the 1st motor I ever blew up was that of an early Porsche 911, then of a 914! I was 17 then. I'm 31 now.
I'm on the wildside too, the OM617 just does not do that for me, so I will just dial her in propper and learn as much about diesels for when I upgrade to something bigger.
I have blown up a many motors! 8)
I'm not afraid to push limits or hack cars up. the 1st motor I ever blew up was that of an early Porsche 911, then of a 914! I was 17 then. I'm 31 now.
I'm on the wildside too, the OM617 just does not do that for me, so I will just dial her in propper and learn as much about diesels for when I upgrade to something bigger.
08-26-2011, 07:10 PM
#25
(08-26-2011, 09:18 AM)Oil Burner Where's the fun when you leave your car alone, untouched, virginized, BORING
Haa 10-4 copy that! I dig that
(08-26-2011, 06:29 PM)smoke026 I have blown up a many motors! 8)
I'm not afraid to push limits or hack cars up. the 1st motor I ever blew up was that of an early Porsche 911, then of a 914! I was 17 then. I'm 31 now.
I'm on the wildside too, the OM617 just does not do that for me, so I will just dial her in propper and learn as much about diesels for when I upgrade to something bigger.
LMFAO ahh what a life sounds fun
I'm currently 17 and I wanna have fun with my OM617! I wanna push her to the limit!
This post was last modified: 08-26-2011, 07:13 PM by CJP28.
(08-26-2011, 09:18 AM)Oil Burner Where's the fun when you leave your car alone, untouched, virginized, BORING
Haa 10-4 copy that! I dig that
(08-26-2011, 06:29 PM)smoke026 I have blown up a many motors! 8)
I'm not afraid to push limits or hack cars up. the 1st motor I ever blew up was that of an early Porsche 911, then of a 914! I was 17 then. I'm 31 now.
I'm on the wildside too, the OM617 just does not do that for me, so I will just dial her in propper and learn as much about diesels for when I upgrade to something bigger.
LMFAO ahh what a life sounds fun
I'm currently 17 and I wanna have fun with my OM617! I wanna push her to the limit!
Users browsing this thread:
17 Guest(s)
17 Guest(s)
Users browsing this thread:
17 Guest(s)
17 Guest(s)