Cylinder Head Gasket w124 300 turbo OM603 which one?
Cylinder Head Gasket w124 300 turbo OM603 which one?
02-21-2011, 08:26 PM
#1
I would like to experiment a little with the turbopressure so it might be wise to use another head gasket than original?
Anyone know which one? Any mods needed? Other tips to make this 603 faster, the cilinderhead has to come off so easy to do some mods.
This post was last modified: 08-23-2011, 10:30 AM by winmutt.
justcruisin
02-21-2011, 08:26 PM #1Ok, ready to replace the head gasket due to an oil leak to the timing chain.
I would like to experiment a little with the turbopressure so it might be wise to use another head gasket than original?
Anyone know which one? Any mods needed? Other tips to make this 603 faster, the cilinderhead has to come off so easy to do some mods.
02-22-2011, 12:23 AM
#2
If I recall correctly, a 606 head gasket is MLS which has metal in it and can bus used on a 603 but some drilling has to be done first. I too am wanting to get a game plan ready for when I replace mine :-)
jonbobshinigin
02-22-2011, 12:23 AM #2Someone else will chime in her with more details but...
If I recall correctly, a 606 head gasket is MLS which has metal in it and can bus used on a 603 but some drilling has to be done first. I too am wanting to get a game plan ready for when I replace mine :-)
02-23-2011, 05:08 PM
#3
OM605 600hp diesel drag car build with BMW E30 chassis
What is your engine setup and how much boost you use?
OM605 600hp diesel drag car build with BMW E30 chassis
02-23-2011, 10:32 PM
#4
Maybe later a bigger turbo?
Because the head hasket is broken it might be wise to mount a better/different one.
Thanks for helping out a newbie.
justcruisin
02-23-2011, 10:32 PM #4It's still stock, want to raise the pressure of the turbo and screw the ip for more diesel.
Maybe later a bigger turbo?
Because the head hasket is broken it might be wise to mount a better/different one.
Thanks for helping out a newbie.
02-24-2011, 07:49 AM
#5
OM605 600hp diesel drag car build with BMW E30 chassis
Read that http://hevosvoima.com/foorumi/viewtopic.php?f=33&t=125
OM605 600hp diesel drag car build with BMW E30 chassis
02-28-2011, 06:05 PM
#7
(02-28-2011, 12:28 PM)winmutt Somewhere I saw a thread that showed where the holes had to be placed. Anyone know what I am talking about?Not need any thread when you have old and new gasket.
OM605 600hp diesel drag car build with BMW E30 chassis
(02-28-2011, 12:28 PM)winmutt Somewhere I saw a thread that showed where the holes had to be placed. Anyone know what I am talking about?Not need any thread when you have old and new gasket.
OM605 600hp diesel drag car build with BMW E30 chassis
08-23-2011, 08:49 AM
#8
Where do you suggest placing it? Around the cylinders?
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
Jeemu, you said use VHT copper gasket in http://hevosvoima.com/foorumi/viewtopic.php?f=33&t=125
Where do you suggest placing it? Around the cylinders?
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
08-23-2011, 11:53 AM
#9
(08-23-2011, 08:49 AM)winmutt Jeemu, you said use VHT copper gasket in http://hevosvoima.com/foorumi/viewtopic.php?f=33&t=125Spay the gasket on it. I disassemble gasket and layers and spray all layers.
Where do you suggest placing it? Around the cylinders?
OM605 600hp diesel drag car build with BMW E30 chassis
(08-23-2011, 08:49 AM)winmutt Jeemu, you said use VHT copper gasket in http://hevosvoima.com/foorumi/viewtopic.php?f=33&t=125Spay the gasket on it. I disassemble gasket and layers and spray all layers.
Where do you suggest placing it? Around the cylinders?
OM605 600hp diesel drag car build with BMW E30 chassis
08-24-2011, 01:38 AM
#11
(08-23-2011, 12:04 PM)winmutt Interesting. do you have a link to what you use. Here copper sealant gasket is not sprayable.Hi. It is this what we use http://www.vhtpaint.com/coppergasketcement.html
Also Mopar has good spray gasket sealant. That i use now
OM605 600hp diesel drag car build with BMW E30 chassis
(08-23-2011, 12:04 PM)winmutt Interesting. do you have a link to what you use. Here copper sealant gasket is not sprayable.Hi. It is this what we use http://www.vhtpaint.com/coppergasketcement.html
Also Mopar has good spray gasket sealant. That i use now
OM605 600hp diesel drag car build with BMW E30 chassis
08-24-2011, 10:58 AM
#12
jonbobshinigin
08-24-2011, 10:58 AM #12So then we would take a 606 gasket and drill the appropriate hole out, and then spray it with this?
08-24-2011, 11:00 AM
#13
(08-24-2011, 10:58 AM)jonbobshinigin So then we would take a 606 gasket and drill the appropriate hole out, and then spray it with this?
He said he actually seperates the layers for the headgasket and then sprays this inbetween. I think that is a bit overkill for my needs.
Jeemu, do you also spray the mating faces of the gasket with this stuff?
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
(08-24-2011, 10:58 AM)jonbobshinigin So then we would take a 606 gasket and drill the appropriate hole out, and then spray it with this?
He said he actually seperates the layers for the headgasket and then sprays this inbetween. I think that is a bit overkill for my needs.
Jeemu, do you also spray the mating faces of the gasket with this stuff?
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
08-24-2011, 12:47 PM
#14
(08-24-2011, 11:00 AM)winmutt(08-24-2011, 10:58 AM)jonbobshinigin So then we would take a 606 gasket and drill the appropriate hole out, and then spray it with this?
He said he actually seperates the layers for the headgasket and then sprays this inbetween. I think that is a bit overkill for my needs.
Jeemu, do you also spray the mating faces of the gasket with this stuff?
At firs we sprayed only on top and bottom of gasket, but then we started to paint all layers.
Here is sprayed only top and bottom layer. It glue gasket on the block.
![[Image: img1655134.jpg]](http://kuva1.kuvablogi.com/iso/img1655134.jpg)
This post was last modified: 08-24-2011, 12:48 PM by jeemu.
OM605 600hp diesel drag car build with BMW E30 chassis
(08-24-2011, 11:00 AM)winmutt(08-24-2011, 10:58 AM)jonbobshinigin So then we would take a 606 gasket and drill the appropriate hole out, and then spray it with this?
He said he actually seperates the layers for the headgasket and then sprays this inbetween. I think that is a bit overkill for my needs.
Jeemu, do you also spray the mating faces of the gasket with this stuff?
At firs we sprayed only on top and bottom of gasket, but then we started to paint all layers.
Here is sprayed only top and bottom layer. It glue gasket on the block.
OM605 600hp diesel drag car build with BMW E30 chassis
![[Image: 322366d1280442778-om603-22-cylinder-head...g_0027.jpg]](http://www.benzworld.org/forums/attachments/sale-wanted-trade-giveaway/322366d1280442778-om603-22-cylinder-head-sold-img_0027.jpg)
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Users browsing this thread:
2 Guest(s)
2 Guest(s)