606A with mechanical IP question..
606A with mechanical IP question..
02-14-2012, 03:20 PM
#1
i think my mechanic is trying to con me !!!
rgds hus.
huseyin55amg
02-14-2012, 03:20 PM #1hi there. i have question i was hoping to get an answer from you guys. i recently fitted a 606a to my g wagen . i had a mechanical IP fitted and was told that i had to change the toothed gear that adjusts the timing. it runs off the timing chain infront of the pump. is the original toothed gear for timing fitted to the 606a really different ?
i think my mechanic is trying to con me !!!
rgds hus.
02-14-2012, 05:58 PM
#2
(02-14-2012, 03:20 PM)huseyin55amg hi there. i have question i was hoping to get an answer from you guys. i recently fitted a 606a to my g wagen . i had a mechanical IP fitted and was told that i had to change the toothed gear that adjusts the timing. it runs off the timing chain infront of the pump. is the original toothed gear for timing fitted to the 606a really different ?
i think my mechanic is trying to con me !!!
rgds hus.
If the original pump was an turbo ip(electric), i don`t know. But the mechanical om603.910/962 and om606.910 has the same toothed gear in the front.
The only thing i can think of, is maybe the electrical IP doesn`t have the timing guveoner that is fitted to the that toothed gear.
I have a stock om606.910 (the same as om603) fitted to my 606 turbo
EDH_Performance
02-14-2012, 05:58 PM #2(02-14-2012, 03:20 PM)huseyin55amg hi there. i have question i was hoping to get an answer from you guys. i recently fitted a 606a to my g wagen . i had a mechanical IP fitted and was told that i had to change the toothed gear that adjusts the timing. it runs off the timing chain infront of the pump. is the original toothed gear for timing fitted to the 606a really different ?
i think my mechanic is trying to con me !!!
rgds hus.
If the original pump was an turbo ip(electric), i don`t know. But the mechanical om603.910/962 and om606.910 has the same toothed gear in the front.
The only thing i can think of, is maybe the electrical IP doesn`t have the timing guveoner that is fitted to the that toothed gear.
I have a stock om606.910 (the same as om603) fitted to my 606 turbo
02-14-2012, 11:39 PM
#3
(02-14-2012, 05:58 PM)EDH_Performance(02-14-2012, 03:20 PM)huseyin55amg hi there. i have question i was hoping to get an answer from you guys. i recently fitted a 606a to my g wagen . i had a mechanical IP fitted and was told that i had to change the toothed gear that adjusts the timing. it runs off the timing chain infront of the pump. is the original toothed gear for timing fitted to the 606a really different ?
i think my mechanic is trying to con me !!!
rgds hus.
If the original pump was an turbo ip(electric), i don`t know. But the mechanical om603.910/962 and om606.910 has the same toothed gear in the front.
The only thing i can think of, is maybe the electrical IP doesn`t have the timing guveoner that is fitted to the that toothed gear.
I have a stock om606.910 (the same as om603) fitted to my 606 turbo
thanks for the reply. iwill carry on investigating...
huseyin55amg
02-14-2012, 11:39 PM #3(02-14-2012, 05:58 PM)EDH_Performance(02-14-2012, 03:20 PM)huseyin55amg hi there. i have question i was hoping to get an answer from you guys. i recently fitted a 606a to my g wagen . i had a mechanical IP fitted and was told that i had to change the toothed gear that adjusts the timing. it runs off the timing chain infront of the pump. is the original toothed gear for timing fitted to the 606a really different ?
i think my mechanic is trying to con me !!!
rgds hus.
If the original pump was an turbo ip(electric), i don`t know. But the mechanical om603.910/962 and om606.910 has the same toothed gear in the front.
The only thing i can think of, is maybe the electrical IP doesn`t have the timing guveoner that is fitted to the that toothed gear.
I have a stock om606.910 (the same as om603) fitted to my 606 turbo
thanks for the reply. iwill carry on investigating...
02-15-2012, 04:03 AM
#4
I don't think they are different(I have not noticed any difference) and for sure you can use any of them. Remember that both the 606.962 and the 603 has mechanical pumps, it is just the rack that is electronically controlled on the 606, and that has nothing to do with timing.
02-15-2012, 09:57 AM
#5
(02-15-2012, 04:03 AM)erling66 I don't think they are different(I have not noticed any difference) and for sure you can use any of them. Remember that both the 606.962 and the 603 has mechanical pumps, it is just the rack that is electronically controlled on the 606, and that has nothing to do with timing.
hmm,,,i slowly seem to be seeing the light ....!
thx
rgds hus
huseyin55amg
02-15-2012, 09:57 AM #5(02-15-2012, 04:03 AM)erling66 I don't think they are different(I have not noticed any difference) and for sure you can use any of them. Remember that both the 606.962 and the 603 has mechanical pumps, it is just the rack that is electronically controlled on the 606, and that has nothing to do with timing.
hmm,,,i slowly seem to be seeing the light ....!
thx
rgds hus
02-17-2012, 06:57 AM
#6
Basically what I'm saying is that the gear will have to match the engine because of the vacuum pump drive. The gear will fit any of the pumps so no worries there.
1998 MB E300 - 194,000 miles. Current/future mods: 7.5mm pump elements, Holset HX40 Turbo feeding Eaton M90 supercharger through custom fabbed intake system. Aeroturbine muffler, scratch-built 4" stainless exhaust. EGR eliminated, ECM recalibrated, modified rack position feedback circuit. Porterfield RS brake pads, Bilstein sport shocks, VDO EGT, oil and boost gauges.
2000 Ford F250 - 150,000 miles. Current/future mods: DP Tuner 3 map chip, scratch-built high flow intake, high output IDM, open circuit fuel system, ball bearing turbo, South Bend full metal clutch, slotted and drilled rotors. Autometer Sport Comp EGT and boost gauges.
If the pump came and gear came from an OM603, the vacuum drive is different. Also, the original gear from your engine will be compatible with the older pump.
Basically what I'm saying is that the gear will have to match the engine because of the vacuum pump drive. The gear will fit any of the pumps so no worries there.
1998 MB E300 - 194,000 miles. Current/future mods: 7.5mm pump elements, Holset HX40 Turbo feeding Eaton M90 supercharger through custom fabbed intake system. Aeroturbine muffler, scratch-built 4" stainless exhaust. EGR eliminated, ECM recalibrated, modified rack position feedback circuit. Porterfield RS brake pads, Bilstein sport shocks, VDO EGT, oil and boost gauges.
2000 Ford F250 - 150,000 miles. Current/future mods: DP Tuner 3 map chip, scratch-built high flow intake, high output IDM, open circuit fuel system, ball bearing turbo, South Bend full metal clutch, slotted and drilled rotors. Autometer Sport Comp EGT and boost gauges.
02-17-2012, 03:08 PM
#7
(02-17-2012, 06:57 AM)E300TSC If the pump came and gear came from an OM603, the vacuum drive is different. Also, the original gear from your engine will be compatible with the older pump.
Basically what I'm saying is that the gear will have to match the engine because of the vacuum pump drive. The gear will fit any of the pumps so no worries there.
hi there. thanks for the reply. so what you mean to say is that the original gear on a 606a is compatible with the 603 mechanical IP right ? so there is no need to change it at all .
rgds hus
huseyin55amg
02-17-2012, 03:08 PM #7(02-17-2012, 06:57 AM)E300TSC If the pump came and gear came from an OM603, the vacuum drive is different. Also, the original gear from your engine will be compatible with the older pump.
Basically what I'm saying is that the gear will have to match the engine because of the vacuum pump drive. The gear will fit any of the pumps so no worries there.
hi there. thanks for the reply. so what you mean to say is that the original gear on a 606a is compatible with the 603 mechanical IP right ? so there is no need to change it at all .
rgds hus
02-17-2012, 07:07 PM
#8
Another way to say it is that the original injection pump gear stays with the engine regardless of which injection pump you use.
This post was last modified: 02-17-2012, 07:08 PM by E300TSC.
1998 MB E300 - 194,000 miles. Current/future mods: 7.5mm pump elements, Holset HX40 Turbo feeding Eaton M90 supercharger through custom fabbed intake system. Aeroturbine muffler, scratch-built 4" stainless exhaust. EGR eliminated, ECM recalibrated, modified rack position feedback circuit. Porterfield RS brake pads, Bilstein sport shocks, VDO EGT, oil and boost gauges.
2000 Ford F250 - 150,000 miles. Current/future mods: DP Tuner 3 map chip, scratch-built high flow intake, high output IDM, open circuit fuel system, ball bearing turbo, South Bend full metal clutch, slotted and drilled rotors. Autometer Sport Comp EGT and boost gauges.
Correct. The gears will interchange on OM601, OM602, OM603, OM604, OM605, OM606 injection pump. BUT, the gear must match the vacuum pump drive coupling for the particular engine.
Another way to say it is that the original injection pump gear stays with the engine regardless of which injection pump you use.
1998 MB E300 - 194,000 miles. Current/future mods: 7.5mm pump elements, Holset HX40 Turbo feeding Eaton M90 supercharger through custom fabbed intake system. Aeroturbine muffler, scratch-built 4" stainless exhaust. EGR eliminated, ECM recalibrated, modified rack position feedback circuit. Porterfield RS brake pads, Bilstein sport shocks, VDO EGT, oil and boost gauges.
2000 Ford F250 - 150,000 miles. Current/future mods: DP Tuner 3 map chip, scratch-built high flow intake, high output IDM, open circuit fuel system, ball bearing turbo, South Bend full metal clutch, slotted and drilled rotors. Autometer Sport Comp EGT and boost gauges.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)