WTB: Euro bumpers
WTB: Euro bumpers
02-18-2012, 10:04 PM
#1
but i want me a pair of those damn bumpers
Three piece preferred but i know the one piece are a little more common.
I know there's a set out there waiting for me!
Purplecomputer
02-18-2012, 10:04 PM #1This is a long shot considering how rare they are.
but i want me a pair of those damn bumpers
Three piece preferred but i know the one piece are a little more common.
I know there's a set out there waiting for me!
02-19-2012, 02:01 AM
#2
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
02-19-2012, 02:01 AM #2Everybody wants these! lol you should just settle for euro lights
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
02-19-2012, 12:57 PM
#3
I will also get the euro headligts and maybe
Get me a body kit spray paint it, lower the car put in pink headlights.
Oh yeah and a friggin sweat ass spoiler. I also forgot rhe neon lights....
Lol i would never
Purplecomputer
02-19-2012, 12:57 PM #3I will not give up until i have me those beuties in my hands.
I will also get the euro headligts and maybe
Get me a body kit spray paint it, lower the car put in pink headlights.
Oh yeah and a friggin sweat ass spoiler. I also forgot rhe neon lights....
Lol i would never
02-19-2012, 09:24 PM
#4
'84 300 SD w126 Race Car
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver
serverman777
02-19-2012, 09:24 PM #4I can order them for you. I got a connection with the Mercedes-Benz of Norway parts Dept.
'84 300 SD w126 Race Car
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver
02-19-2012, 11:33 PM
#5
(02-19-2012, 09:24 PM)serverman777 I can order them for you. I got a connection with the Mercedes-Benz of Norway parts Dept.
if its not to much, would you be able to get a price quote for both style bumpers?
Purplecomputer
02-19-2012, 11:33 PM #5(02-19-2012, 09:24 PM)serverman777 I can order them for you. I got a connection with the Mercedes-Benz of Norway parts Dept.
if its not to much, would you be able to get a price quote for both style bumpers?
02-20-2012, 12:15 AM
#6
Spend*
This post was last modified: 02-20-2012, 12:15 AM by serverman777.
'84 300 SD w126 Race Car
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver
serverman777
02-20-2012, 12:15 AM #6Do you have up 1,000 USD to spent?
Spend*
'84 300 SD w126 Race Car
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver
02-20-2012, 12:34 AM
#7
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
02-20-2012, 12:34 AM #7I've though about seeing if my friend could get some for me, he's an exchange student from Romania and he claims to know someone who owns a junkyard there, but Idk he could just be pulling my leg haha
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
02-20-2012, 12:46 PM
#8
(02-20-2012, 12:15 AM)serverman777 Do you have up 1,000 USD to spent?
Spend*
Not for bumpers....thanks though
Purplecomputer
02-20-2012, 12:46 PM #8(02-20-2012, 12:15 AM)serverman777 Do you have up 1,000 USD to spent?
Spend*
Not for bumpers....thanks though
02-20-2012, 02:37 PM
#9
'84 300 SD w126 Race Car
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver
serverman777
02-20-2012, 02:37 PM #9Its just the international shipping. I ordered some lights a few days ago for a 560 SEC, Shipping costed more than the lights
'84 300 SD w126 Race Car
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver
02-20-2012, 02:45 PM
#10
(02-20-2012, 02:37 PM)serverman777 Its just the international shipping. I ordered some lights a few days ago for a 560 SEC, Shipping costed more than the lights
Sometimes it dosnt make sense to buy overseas with this type of stuff
Im gonna be buying a rear three piecd bumper from greazzer so ill just look around for the front now
Purplecomputer
02-20-2012, 02:45 PM #10(02-20-2012, 02:37 PM)serverman777 Its just the international shipping. I ordered some lights a few days ago for a 560 SEC, Shipping costed more than the lights
Sometimes it dosnt make sense to buy overseas with this type of stuff
Im gonna be buying a rear three piecd bumper from greazzer so ill just look around for the front now
02-20-2012, 03:23 PM
#11
The w123 euro light knock offs are pretty good on ebay and super cheap compared to the originals
This post was last modified: 02-20-2012, 03:24 PM by willbhere4u.
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
02-20-2012, 03:23 PM #11I have an 500SEC/w126 and 560sl/r107 euro front bumper
The w123 euro light knock offs are pretty good on ebay and super cheap compared to the originals
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
02-20-2012, 03:55 PM
#12
(02-20-2012, 03:23 PM)willbhere4u I have an 500SEC/w126 and 560sl/r107 euro front bumper
The w123 euro light knock offs are pretty good on ebay and super cheap compared to the originals
Three piece?
I was actually going to place an order for them but they tool the listing off!
This post was last modified: 02-20-2012, 03:55 PM by Purplecomputer.
Purplecomputer
02-20-2012, 03:55 PM #12(02-20-2012, 03:23 PM)willbhere4u I have an 500SEC/w126 and 560sl/r107 euro front bumper
The w123 euro light knock offs are pretty good on ebay and super cheap compared to the originals
Three piece?
I was actually going to place an order for them but they tool the listing off!
02-20-2012, 04:34 PM
#13
If you're talking about the Depo ones, I just sent the seller a message asking if they're gonna be getting any more, I'll let you know if/when I hear back
This post was last modified: 02-20-2012, 04:43 PM by sassparilla_kid.
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
02-20-2012, 04:34 PM #13Wow that's dumb, they'll probably re-list them in the next couple days I'm guessing
If you're talking about the Depo ones, I just sent the seller a message asking if they're gonna be getting any more, I'll let you know if/when I hear back
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
02-20-2012, 06:05 PM
#14
(02-20-2012, 04:34 PM)sassparilla_kid Wow that's dumb, they'll probably re-list them in the next couple days I'm guessing
If you're talking about the Depo ones, I just sent the seller a message asking if they're gonna be getting any more, I'll let you know if/when I hear back
Yes I was talking about the depo's
I know they're are not bosch quality but im sure they will be more then fine.
Purplecomputer
02-20-2012, 06:05 PM #14(02-20-2012, 04:34 PM)sassparilla_kid Wow that's dumb, they'll probably re-list them in the next couple days I'm guessing
If you're talking about the Depo ones, I just sent the seller a message asking if they're gonna be getting any more, I'll let you know if/when I hear back
Yes I was talking about the depo's
I know they're are not bosch quality but im sure they will be more then fine.
02-20-2012, 06:41 PM
#15
The euro w126 coupe front bumper is plastic and one piece of chrome on top
This post was last modified: 02-20-2012, 06:41 PM by willbhere4u.
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
02-20-2012, 06:41 PM #15Ive got the euro depo's on my turbo w123 240d and they look nice
The euro w126 coupe front bumper is plastic and one piece of chrome on top
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
02-20-2012, 07:10 PM
#16
(02-20-2012, 06:41 PM)willbhere4u Ive got the euro depo's on my turbo w123 240d and they look nice
The euro w126 coupe front bumper is plastic and one piece of chrome on top
oh that wont fit my car, need matching bumpers
Edit: The euro headlights are back up again
http://www.ebay.com/itm/MERCEDES-BENZ-W1...5069wt_905
This post was last modified: 02-20-2012, 07:10 PM by Purplecomputer.
Purplecomputer
02-20-2012, 07:10 PM #16(02-20-2012, 06:41 PM)willbhere4u Ive got the euro depo's on my turbo w123 240d and they look nice
The euro w126 coupe front bumper is plastic and one piece of chrome on top
oh that wont fit my car, need matching bumpers
Edit: The euro headlights are back up again
http://www.ebay.com/itm/MERCEDES-BENZ-W1...5069wt_905
02-20-2012, 10:59 PM
#17
(02-20-2012, 02:45 PM)Purplecomputer(02-20-2012, 02:37 PM)serverman777 Its just the international shipping. I ordered some lights a few days ago for a 560 SEC, Shipping costed more than the lights
Sometimes it dosnt make sense to buy overseas with this type of stuff
Im gonna be buying a rear three piecd bumper from greazzer so ill just look around for the front now
'84 300 SD w126 Race Car
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver
serverman777
02-20-2012, 10:59 PM #17Clear AMG (China Star) Light Conners for a w126 560 SEC. Only one new set on ebay, and they were the over seas. Didnt really have a choice
(02-20-2012, 02:45 PM)Purplecomputer(02-20-2012, 02:37 PM)serverman777 Its just the international shipping. I ordered some lights a few days ago for a 560 SEC, Shipping costed more than the lights
Sometimes it dosnt make sense to buy overseas with this type of stuff
Im gonna be buying a rear three piecd bumper from greazzer so ill just look around for the front now
'84 300 SD w126 Race Car
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver
02-20-2012, 11:58 PM
#18
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
02-20-2012, 11:58 PM #18I'm debating spending the rest of my tax refund on euro lamps or not, how do they look on the cream colored cars? I just got round H4 lamps like 3 or 4 months ago, I'm thinking now I should have gone for a set of euros since they're only like $50 more haha
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
02-21-2012, 01:01 AM
#19
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
02-21-2012, 01:01 AM #19The ad says the lamps have city lights? So is that like daytime running lights, and if so is there an extra bulb in there orrr how does that work??
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
02-21-2012, 06:11 PM
#20
I haven't wired mine up yet... might be installing HID's so I may need to re-think all the headlight wiring... we'll see how this turns out
This post was last modified: 02-21-2012, 06:12 PM by capflya.
'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
Yep... extra bulb... you have to splice in to the headlight wires and add another wire to get them to work. Easy enough to do, you will need 6 pin "plastic" plugs to replace the 4 pin ones the US cars came with. They can be found on other connections in the car or I think there is a "kit" on ebay to wire them up easily.
I haven't wired mine up yet... might be installing HID's so I may need to re-think all the headlight wiring... we'll see how this turns out
'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
02-21-2012, 11:01 PM
#21
(02-21-2012, 06:11 PM)capflya Yep... extra bulb... you have to splice in to the headlight wires and add another wire to get them to work. Easy enough to do, you will need 6 pin "plastic" plugs to replace the 4 pin ones the US cars came with. They can be found on other connections in the car or I think there is a "kit" on ebay to wire them up easily.
I haven't wired mine up yet... might be installing HID's so I may need to re-think all the headlight wiring... we'll see how this turns out
Let me know how you turn out with the HID and if you cam, make a thread on it
Purplecomputer
02-21-2012, 11:01 PM #21(02-21-2012, 06:11 PM)capflya Yep... extra bulb... you have to splice in to the headlight wires and add another wire to get them to work. Easy enough to do, you will need 6 pin "plastic" plugs to replace the 4 pin ones the US cars came with. They can be found on other connections in the car or I think there is a "kit" on ebay to wire them up easily.
I haven't wired mine up yet... might be installing HID's so I may need to re-think all the headlight wiring... we'll see how this turns out
Let me know how you turn out with the HID and if you cam, make a thread on it
03-03-2012, 01:54 AM
#22
if it don’t blow black...take it back.
1982 300TDT 4 Speed 196K Standard Beige “VEGEWGN”. 300GD FW. Walbro FRC-8 Fuel Pump. ZadaTech LCD Boost, EGT, & Fuel Pressure gauge. Non-EGR Exhaust and Intake Manifold. 3/2 Valves gone. Soon to have Elsbett WVO conversion
1981 300D 314K Midnight Blue “The Blue Car”, Lovecrap system, owned 25 years+
1985 300TD White 198K “Betty White” Pure beauty
The VEGEWGN
You want some Euro Bumpers still? Some just showed up at my local PaP. I’ve already got the front in my possession and the back is stashed to get later. They have been modded to fit a US W123.
if it don’t blow black...take it back.
1982 300TDT 4 Speed 196K Standard Beige “VEGEWGN”. 300GD FW. Walbro FRC-8 Fuel Pump. ZadaTech LCD Boost, EGT, & Fuel Pressure gauge. Non-EGR Exhaust and Intake Manifold. 3/2 Valves gone. Soon to have Elsbett WVO conversion
1981 300D 314K Midnight Blue “The Blue Car”, Lovecrap system, owned 25 years+
1985 300TD White 198K “Betty White” Pure beauty
The VEGEWGN
03-05-2012, 01:35 AM
#23
(03-03-2012, 01:54 AM)w123love You want some Euro Bumpers still? Some just showed up at my local PaP. I’ve already got the front in my possession and the back is stashed to get later. They have been modded to fit a US W123.
I already have the rear three piece. All i need is the front. Would you be willing to sell the one you have?
Purplecomputer
03-05-2012, 01:35 AM #23(03-03-2012, 01:54 AM)w123love You want some Euro Bumpers still? Some just showed up at my local PaP. I’ve already got the front in my possession and the back is stashed to get later. They have been modded to fit a US W123.
I already have the rear three piece. All i need is the front. Would you be willing to sell the one you have?
03-05-2012, 11:07 PM
#24
(03-05-2012, 01:35 AM)Purplecomputer(03-03-2012, 01:54 AM)w123love You want some Euro Bumpers still? Some just showed up at my local PaP. I’ve already got the front in my possession and the back is stashed to get later. They have been modded to fit a US W123.
I already have the rear three piece. All i need is the front. Would you be willing to sell the one you have?
Yes I am willing to sell it. I’m polishing it up tonight and can send you pictures. There is one dent that can be bumped out, two other little bends that need to be made. The bumper looks really nice.
if it don’t blow black...take it back.
1982 300TDT 4 Speed 196K Standard Beige “VEGEWGN”. 300GD FW. Walbro FRC-8 Fuel Pump. ZadaTech LCD Boost, EGT, & Fuel Pressure gauge. Non-EGR Exhaust and Intake Manifold. 3/2 Valves gone. Soon to have Elsbett WVO conversion
1981 300D 314K Midnight Blue “The Blue Car”, Lovecrap system, owned 25 years+
1985 300TD White 198K “Betty White” Pure beauty
The VEGEWGN
(03-05-2012, 01:35 AM)Purplecomputer(03-03-2012, 01:54 AM)w123love You want some Euro Bumpers still? Some just showed up at my local PaP. I’ve already got the front in my possession and the back is stashed to get later. They have been modded to fit a US W123.
I already have the rear three piece. All i need is the front. Would you be willing to sell the one you have?
Yes I am willing to sell it. I’m polishing it up tonight and can send you pictures. There is one dent that can be bumped out, two other little bends that need to be made. The bumper looks really nice.
if it don’t blow black...take it back.
1982 300TDT 4 Speed 196K Standard Beige “VEGEWGN”. 300GD FW. Walbro FRC-8 Fuel Pump. ZadaTech LCD Boost, EGT, & Fuel Pressure gauge. Non-EGR Exhaust and Intake Manifold. 3/2 Valves gone. Soon to have Elsbett WVO conversion
1981 300D 314K Midnight Blue “The Blue Car”, Lovecrap system, owned 25 years+
1985 300TD White 198K “Betty White” Pure beauty
The VEGEWGN
Users browsing this thread:
6 Guest(s)
6 Guest(s)
Users browsing this thread:
6 Guest(s)
6 Guest(s)