Custom cup holder
Custom cup holder
03-07-2012, 09:43 PM
#1
http://www.ebay.com/itm/320862779441?ite...m=&vxp=mtr
Ill let you guys know how well it turns out when it arrives. Looks like it is going to be hand made.
Im taking a gamble here but i could really use a cup holder in my car and i dont want some cheap plastic holders bolted into the door.
Purplecomputer
03-07-2012, 09:43 PM #1Just bought this.
http://www.ebay.com/itm/320862779441?ite...m=&vxp=mtr
Ill let you guys know how well it turns out when it arrives. Looks like it is going to be hand made.
Im taking a gamble here but i could really use a cup holder in my car and i dont want some cheap plastic holders bolted into the door.
03-08-2012, 02:19 AM
#2
if it don’t blow black...take it back.
1982 300TDT 4 Speed 196K Standard Beige “VEGEWGN”. 300GD FW. Walbro FRC-8 Fuel Pump. ZadaTech LCD Boost, EGT, & Fuel Pressure gauge. Non-EGR Exhaust and Intake Manifold. 3/2 Valves gone. Soon to have Elsbett WVO conversion
1981 300D 314K Midnight Blue “The Blue Car”, Lovecrap system, owned 25 years+
1985 300TD White 198K “Betty White” Pure beauty
The VEGEWGN
I saw that a couple days ago also. Looks like he glued a newer Mercedes slatted privacy console cover together. Looking forward to the results.
if it don’t blow black...take it back.
1982 300TDT 4 Speed 196K Standard Beige “VEGEWGN”. 300GD FW. Walbro FRC-8 Fuel Pump. ZadaTech LCD Boost, EGT, & Fuel Pressure gauge. Non-EGR Exhaust and Intake Manifold. 3/2 Valves gone. Soon to have Elsbett WVO conversion
1981 300D 314K Midnight Blue “The Blue Car”, Lovecrap system, owned 25 years+
1985 300TD White 198K “Betty White” Pure beauty
The VEGEWGN
03-08-2012, 02:43 AM
#3
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
03-08-2012, 02:43 AM #3So it takes the place of that barely functional center console that gets filled up with useless junk 5 minutes after I clean it out? sounds good to me!
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
03-08-2012, 11:46 AM
#4
'84 300 SD w126 Race Car
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver
serverman777
03-08-2012, 11:46 AM #4I want one!!!
'84 300 SD w126 Race Car
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver
03-08-2012, 01:37 PM
#5
(03-08-2012, 11:46 AM)serverman777 I want one!!!
Ill post pictures in detail when i get it so we can see how good it is. Im pretty sure it will be just fine
Purplecomputer
03-08-2012, 01:37 PM #5(03-08-2012, 11:46 AM)serverman777 I want one!!!
Ill post pictures in detail when i get it so we can see how good it is. Im pretty sure it will be just fine
03-08-2012, 01:43 PM
#6
'84 300 SD w126 Race Car
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver
serverman777
03-08-2012, 01:43 PM #6It looks legit.
'84 300 SD w126 Race Car
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver
03-08-2012, 01:52 PM
#7
(03-08-2012, 01:43 PM)serverman777 It looks legit.
Looks like it came with the car when it left the factory. it didnt specify if the actual holders were a one size fits all deal
Purplecomputer
03-08-2012, 01:52 PM #7(03-08-2012, 01:43 PM)serverman777 It looks legit.
Looks like it came with the car when it left the factory. it didnt specify if the actual holders were a one size fits all deal
03-08-2012, 04:02 PM
#8
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
03-08-2012, 04:02 PM #8I think one could make these pretty easily, I might have to look into it
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
03-08-2012, 05:45 PM
#9
(03-08-2012, 04:02 PM)sassparilla_kid I think one could make these pretty easily, I might have to look into it
Im sure you could, but I am terrible with wood work so for $75 shipped I would rather save myself the hassle and pay someone else to do it.
Purplecomputer
03-08-2012, 05:45 PM #9(03-08-2012, 04:02 PM)sassparilla_kid I think one could make these pretty easily, I might have to look into it
Im sure you could, but I am terrible with wood work so for $75 shipped I would rather save myself the hassle and pay someone else to do it.
03-08-2012, 07:04 PM
#10
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
03-08-2012, 07:04 PM #10I am pretty good with wood work, definitely gonna have to try this out. I think the cup holders would be awesome with (I think it was a w126) armrest that opened up for storing stuff
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
03-08-2012, 11:42 PM
#11
(03-08-2012, 07:04 PM)sassparilla_kid I am pretty good with wood work, definitely gonna have to try this out. I think the cup holders would be awesome with (I think it was a w126) armrest that opened up for storing stuff
I would love to see what you turn up with. We can compare when everything arrives and you make yours.
Purplecomputer
03-08-2012, 11:42 PM #11(03-08-2012, 07:04 PM)sassparilla_kid I am pretty good with wood work, definitely gonna have to try this out. I think the cup holders would be awesome with (I think it was a w126) armrest that opened up for storing stuff
I would love to see what you turn up with. We can compare when everything arrives and you make yours.
03-09-2012, 02:33 AM
#12
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
03-09-2012, 02:33 AM #12I'll try making a mock up one in the next couple weeks, if it turns out alright I'll go the specialty wood place that's sort of near my house and try matching the stock paneling
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
03-14-2012, 04:00 PM
#13
![[Image: th_20120314_154052.jpg]](http://i42.photobucket.com/albums/e338/links156/20120314_154052.jpg)
![[Image: th_20120314_140933.jpg]](http://i42.photobucket.com/albums/e338/links156/20120314_140933.jpg)
![[Image: th_20120314_140925.jpg]](http://i42.photobucket.com/albums/e338/links156/20120314_140925.jpg)
![[Image: th_20120314_140914.jpg]](http://i42.photobucket.com/albums/e338/links156/20120314_140914.jpg)
![[Image: th_20120314_140908.jpg]](http://i42.photobucket.com/albums/e338/links156/20120314_140908.jpg)
![[Image: th_20120314_140945.jpg]](http://i42.photobucket.com/albums/e338/links156/20120314_140945.jpg)
![[Image: th_20120314_154046.jpg]](http://i42.photobucket.com/albums/e338/links156/20120314_154046.jpg)
![[Image: th_20120314_154058.jpg]](http://i42.photobucket.com/albums/e338/links156/20120314_154058.jpg)
Purplecomputer
03-14-2012, 04:00 PM #13check it out guys, got it in the mail today. Not a 100% perfect fit but it looks great in the car.
03-15-2012, 12:55 AM
#14
Question: Do you know what those cup holders are from? Like a brand at all?
if it don’t blow black...take it back.
1982 300TDT 4 Speed 196K Standard Beige “VEGEWGN”. 300GD FW. Walbro FRC-8 Fuel Pump. ZadaTech LCD Boost, EGT, & Fuel Pressure gauge. Non-EGR Exhaust and Intake Manifold. 3/2 Valves gone. Soon to have Elsbett WVO conversion
1981 300D 314K Midnight Blue “The Blue Car”, Lovecrap system, owned 25 years+
1985 300TD White 198K “Betty White” Pure beauty
The VEGEWGN
Looks very nice. Great brightwork.
Question: Do you know what those cup holders are from? Like a brand at all?
if it don’t blow black...take it back.
1982 300TDT 4 Speed 196K Standard Beige “VEGEWGN”. 300GD FW. Walbro FRC-8 Fuel Pump. ZadaTech LCD Boost, EGT, & Fuel Pressure gauge. Non-EGR Exhaust and Intake Manifold. 3/2 Valves gone. Soon to have Elsbett WVO conversion
1981 300D 314K Midnight Blue “The Blue Car”, Lovecrap system, owned 25 years+
1985 300TD White 198K “Betty White” Pure beauty
The VEGEWGN
03-15-2012, 02:54 AM
#15
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
03-15-2012, 02:54 AM #15Awesome, I might have to try making one this weekend, if I can find some unused wood at my house lol
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
03-15-2012, 10:47 AM
#16
(03-15-2012, 12:55 AM)w123love Looks very nice. Great brightwork.
Question: Do you know what those cup holders are from? Like a brand at all?
I checked this morning and there were no markings/numbers on them of any kind. They look to me like ones you pick up at an autopart to replace the ones in a car with cup holders
Purplecomputer
03-15-2012, 10:47 AM #16(03-15-2012, 12:55 AM)w123love Looks very nice. Great brightwork.
Question: Do you know what those cup holders are from? Like a brand at all?
I checked this morning and there were no markings/numbers on them of any kind. They look to me like ones you pick up at an autopart to replace the ones in a car with cup holders
03-15-2012, 01:18 PM
#17
if it don’t blow black...take it back.
1982 300TDT 4 Speed 196K Standard Beige “VEGEWGN”. 300GD FW. Walbro FRC-8 Fuel Pump. ZadaTech LCD Boost, EGT, & Fuel Pressure gauge. Non-EGR Exhaust and Intake Manifold. 3/2 Valves gone. Soon to have Elsbett WVO conversion
1981 300D 314K Midnight Blue “The Blue Car”, Lovecrap system, owned 25 years+
1985 300TD White 198K “Betty White” Pure beauty
The VEGEWGN
Saaaweet thats all I needed to know.
if it don’t blow black...take it back.
1982 300TDT 4 Speed 196K Standard Beige “VEGEWGN”. 300GD FW. Walbro FRC-8 Fuel Pump. ZadaTech LCD Boost, EGT, & Fuel Pressure gauge. Non-EGR Exhaust and Intake Manifold. 3/2 Valves gone. Soon to have Elsbett WVO conversion
1981 300D 314K Midnight Blue “The Blue Car”, Lovecrap system, owned 25 years+
1985 300TD White 198K “Betty White” Pure beauty
The VEGEWGN
03-16-2012, 11:55 PM
#18
vashionjohnson@yahoo.com
shoot him an email if you're interested
Purplecomputer
03-16-2012, 11:55 PM #18I spoke to the seller via eBay email and he gave me his email in case anyone wanted to buy one from him. He says he can do any kind of custom work to match the car and he is willing to resize the wood if it dosnt fit.
vashionjohnson@yahoo.com
shoot him an email if you're interested
Users browsing this thread:
8 Guest(s)
8 Guest(s)
Users browsing this thread:
8 Guest(s)
8 Guest(s)