320 cdi convert to m-tdi

STD Tuning Engine 320 cdi convert to m-tdi

View a Printable Version

0 Vote(s) - 0 Average

Rutiz

Naturally-aspirated

4

04-08-2012, 03:37 PM #1

Hi is it posible to use vw tdi injectors (adapter) and a mecanical pump on this engine or is the combustion chamber/piston design "spesial" for the hi pressure in crd engine design.

Regards
Rune

Rutiz

04-08-2012, 03:37 PM #1

Hi is it posible to use vw tdi injectors (adapter) and a mecanical pump on this engine or is the combustion chamber/piston design "spesial" for the hi pressure in crd engine design.

Regards
Rune

Rutiz

Naturally-aspirated

4

04-09-2012, 04:59 PM #2

Hi If you can mount a vw type 520 injektor or simular (same copper seal type) and made a custom bracket to clamp the injector to the cylinder head. And use a mecanical pump.
Are I missing some ? wold this work ?

Rutiz

04-09-2012, 04:59 PM #2

tomnik

Holset

587

04-09-2012, 11:28 PM #3

Hi Rune,

number and direction of injector spray holes is the smaller issue but how/where is the drive for the pump?

Tom

tomnik

04-09-2012, 11:28 PM #3

Hi Rune,

number and direction of injector spray holes is the smaller issue but how/where is the drive for the pump?

Tom

EDH_Performance

Holset

537

04-10-2012, 01:31 AM #4

(04-09-2012, 11:28 PM)tomnik Hi Rune,

number and direction of injector spray holes is the smaller issue but how/where is the drive for the pump?

Tom

Mount a m-series pump where the hi-pressure pump is, Both the om603/6 and the 320cdi has chain drive? Every thing can be done, but the hard things takes a bit more time Wink

EDH_Performance

04-10-2012, 01:31 AM #4

(04-09-2012, 11:28 PM)tomnik Hi Rune,

number and direction of injector spray holes is the smaller issue but how/where is the drive for the pump?

Tom

Mount a m-series pump where the hi-pressure pump is, Both the om603/6 and the 320cdi has chain drive? Every thing can be done, but the hard things takes a bit more time Wink

Rutiz

Naturally-aspirated

4

04-10-2012, 03:22 AM #5

I thaught aboute modefy cr pump (cut open and mount a belt drive) that way i can keep the seal to the engine.
I think this wold be the easyest way to use a belt to drive the pump (dry system no oil leaks.
Belt drives to. M-pump wold be easy also stock bosch parts (used vw belt drive sprocket).
sorry fore bad spelling.

Regard
Rune

Rutiz

04-10-2012, 03:22 AM #5

aaa

GT2256V

913

04-10-2012, 03:42 AM #6

The m pump's shaft has oil in it. Not sure if this is a primary supply of oil for the pump.

aaa

04-10-2012, 03:42 AM #6

The m pump's shaft has oil in it. Not sure if this is a primary supply of oil for the pump.

EDH_Performance

Holset

537

04-10-2012, 04:26 AM #7

(04-10-2012, 03:42 AM)aaa The m pump's shaft has oil in it. Not sure if this is a primary supply of oil for the pump.

You can drill and mount banjos for oil feeding and return on the m pump i think...But this is a really cool project! Where in Norway are you from?

EDH_Performance

04-10-2012, 04:26 AM #7

(04-10-2012, 03:42 AM)aaa The m pump's shaft has oil in it. Not sure if this is a primary supply of oil for the pump.

You can drill and mount banjos for oil feeding and return on the m pump i think...But this is a really cool project! Where in Norway are you from?

Rutiz

Naturally-aspirated

4

04-10-2012, 04:32 AM #8

Hi. I'm from Karmøy. I'm thinkig om building a 320 cdi boat engine and dont want to play whit al the electronik canbus (to complicaded) in a boat.

Rutiz

04-10-2012, 04:32 AM #8

Hi. I'm from Karmøy. I'm thinkig om building a 320 cdi boat engine and dont want to play whit al the electronik canbus (to complicaded) in a boat.

Boatbuilder

MSc

40

04-25-2012, 04:51 AM #9

(04-10-2012, 04:32 AM)Rutiz Hi. I'm from Karmøy. I'm thinkig om building a 320 cdi boat engine and dont want to play whit al the electronik canbus (to complicaded) in a boat.

Hi, if you want the engine to run properly, use the stock injectors, use the stock high pressure pump and modify the electronics by a real expert, somebody knowledgable of how to change the software.

Are you planning of using a sterndrive ?

Boatbuilder

04-25-2012, 04:51 AM #9

(04-10-2012, 04:32 AM)Rutiz Hi. I'm from Karmøy. I'm thinkig om building a 320 cdi boat engine and dont want to play whit al the electronik canbus (to complicaded) in a boat.

willbhere4u

Six in a row make her go!

2,507

04-25-2012, 09:38 AM #10

Wouldn't it need a prechamber to use a low pressur mechanical pump?

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

willbhere4u

04-25-2012, 09:38 AM #10

Wouldn't it need a prechamber to use a low pressur mechanical pump?

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

View a Printable Version

0 Vote(s) - 0 Average

Users browsing this thread:
8 Guest(s)