Have om606.962 Rods - which pistons?
Have om606.962 Rods - which pistons?
05-08-2012, 03:55 PM
#1
What options do I have for pistons? I know that OM606 pistons are the best, but would pistons from a OM612/647 or OM648 work? (understanding that the block would need to be bored out)
1991 350SDL, burning oil and slow
1991 500SL, yet another project car
1984 190D, swapped 3.6 m104 with a megasquirt
Hi Guys, I got a great deal on a set of rods from an om606.962.
What options do I have for pistons? I know that OM606 pistons are the best, but would pistons from a OM612/647 or OM648 work? (understanding that the block would need to be bored out)
1991 350SDL, burning oil and slow
1991 500SL, yet another project car
1984 190D, swapped 3.6 m104 with a megasquirt
05-08-2012, 05:06 PM
#2
(05-08-2012, 03:55 PM)yatzee Hi Guys, I got a great deal on a set of rods from an om606.962.
What options do I have for pistons? I know that OM606 pistons are the best, but would pistons from a OM612/647 or OM648 work? (understanding that the block would need to be bored out)
i think the newer style cdi pistons have a combustion chamber in them, so they will not be a good match! The best is stock om606.962 pistons (they have 28mm upper pin vs 26mm on N/A om606 engines)
And if you manage do destroy the OM606.962 pistons, let me know
They are REALLY strong!
EDH_Performance
05-08-2012, 05:06 PM #2(05-08-2012, 03:55 PM)yatzee Hi Guys, I got a great deal on a set of rods from an om606.962.
What options do I have for pistons? I know that OM606 pistons are the best, but would pistons from a OM612/647 or OM648 work? (understanding that the block would need to be bored out)
i think the newer style cdi pistons have a combustion chamber in them, so they will not be a good match! The best is stock om606.962 pistons (they have 28mm upper pin vs 26mm on N/A om606 engines)
And if you manage do destroy the OM606.962 pistons, let me know
They are REALLY strong!
05-08-2012, 08:05 PM
#3
Any thoughts on these?
http://motors.shop.ebay.com/Pistons-Ring...06.c0.m282
1991 350SDL, burning oil and slow
1991 500SL, yet another project car
1984 190D, swapped 3.6 m104 with a megasquirt
those would be ideal, but hard to find.
Any thoughts on these?
http://motors.shop.ebay.com/Pistons-Ring...06.c0.m282
1991 350SDL, burning oil and slow
1991 500SL, yet another project car
1984 190D, swapped 3.6 m104 with a megasquirt
05-08-2012, 08:41 PM
#5
So the bowl in the middle is the combustion chamber and anything that has that is NFG for what I'm after?
1991 350SDL, burning oil and slow
1991 500SL, yet another project car
1984 190D, swapped 3.6 m104 with a megasquirt
right. my n00bness is shining through.
So the bowl in the middle is the combustion chamber and anything that has that is NFG for what I'm after?
1991 350SDL, burning oil and slow
1991 500SL, yet another project car
1984 190D, swapped 3.6 m104 with a megasquirt
Users browsing this thread:
7 Guest(s)
7 Guest(s)
Users browsing this thread:
7 Guest(s)
7 Guest(s)