STD Tuning Engine OM602 Engine swap

OM602 Engine swap

OM602 Engine swap

 View a Printable Version
 
  • 0 Vote(s) - 0 Average
 
cover240sx
Find
Naturally-aspirated

10
05-12-2012, 06:39 AM #1
Reply
Reply
I'm currently swapping my 190e with a OM602 Turbo.

I found the engine in a scrap yard but on the engine they only have the glow plug harness. I also have the ECU.

I was wondering what harness do i need to get to plug on the ECU to make the car start and roll?

I'm also converting it to 5 speed manual so I guess no need for wiring on the transmission.

Thanks in advance!
cover240sx
05-12-2012, 06:39 AM #1

I'm currently swapping my 190e with a OM602 Turbo.

I found the engine in a scrap yard but on the engine they only have the glow plug harness. I also have the ECU.

I was wondering what harness do i need to get to plug on the ECU to make the car start and roll?

I'm also converting it to 5 speed manual so I guess no need for wiring on the transmission.

Thanks in advance!

Reply
Reply
aaa
Find
GT2256V

913
05-12-2012, 06:50 AM #2
Reply
Reply
You only need the glow plug harness to start.

If its a 90 or later 602, the ECU controls the vacuum operated wastegate. If you switch to a pressure-operated wastegate then you do not need the ECU at all.
aaa
05-12-2012, 06:50 AM #2

You only need the glow plug harness to start.

If its a 90 or later 602, the ECU controls the vacuum operated wastegate. If you switch to a pressure-operated wastegate then you do not need the ECU at all.

Reply
Reply
cover240sx
Find
Naturally-aspirated

10
05-12-2012, 07:07 AM #3
Reply
Reply
Well that's a good new.

But if i'm not running a ECU the engine performance will be the same? Cause i'm planning to boost a little bit my engine for racing use. So if I understand enven if I change my IP and the turbo I doesn't need to tune the ECU right?

I'm alway been with gas and slowing going to diesel so I'm kind newb here sorry.
cover240sx
05-12-2012, 07:07 AM #3

Well that's a good new.

But if i'm not running a ECU the engine performance will be the same? Cause i'm planning to boost a little bit my engine for racing use. So if I understand enven if I change my IP and the turbo I doesn't need to tune the ECU right?

I'm alway been with gas and slowing going to diesel so I'm kind newb here sorry.

Reply
Reply
aaa
Find
GT2256V

913
05-12-2012, 07:58 AM #4
Reply
Reply
The ECU is for the EGR and wastegate. The rest is totally mechanical.
aaa
05-12-2012, 07:58 AM #4

The ECU is for the EGR and wastegate. The rest is totally mechanical.

Reply
Reply
 View a Printable Version
 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)