Want to buy or measure rear bumper brackets
Want to buy or measure rear bumper brackets
05-20-2012, 09:50 AM
#1
Does anyone know how long the bracket is ? I could try to make one or does anyone have one for sale?. Need both sides. Also, looking for the wrap around piece that goes on the inside of the end. I also think there is some sort of tab that goes onto the rear quarter panel. I looked at the FSM and this is my best guess at this point. Who would think a bumper would be challenging. LOL
Thanks
Ninth Year Anniversary with STD on 1-9-2020
visit: www.dieselfuelinjector.guru
Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.
RED W123 - left Germany as 240D in 1982. Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
I have a Rear Euro Bumper, 3 piece. I think I need the bracket which connects the bumper to the body. It appears to be two bolts on the bumper and I assume 3 bolts to the car. It is for a W123.
Does anyone know how long the bracket is ? I could try to make one or does anyone have one for sale?. Need both sides. Also, looking for the wrap around piece that goes on the inside of the end. I also think there is some sort of tab that goes onto the rear quarter panel. I looked at the FSM and this is my best guess at this point. Who would think a bumper would be challenging. LOL
Thanks
Ninth Year Anniversary with STD on 1-9-2020
visit: www.dieselfuelinjector.guru
Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.
RED W123 - left Germany as 240D in 1982. Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
05-20-2012, 12:32 PM
#2
(05-20-2012, 09:50 AM)Greazzer I have a Rear Euro Bumper, 3 piece. I think I need the bracket which connects the bumper to the body. It appears to be two bolts on the bumper and I assume 3 bolts to the car. It is for a W123.
Does anyone know how long the bracket is ? I could try to make one or does anyone have one for sale?. Need both sides. Also, looking for the wrap around piece that goes on the inside of the end. I also think there is some sort of tab that goes onto the rear quarter panel. I looked at the FSM and this is my best guess at this point. Who would think a bumper would be challenging. LOL
Thanks
I was having the same issue, I had to take off the bumper because of how loose it was and it would scratch the paint everytime I hit a bump. Let me know what you come up with.
Purplecomputer
05-20-2012, 12:32 PM #2(05-20-2012, 09:50 AM)Greazzer I have a Rear Euro Bumper, 3 piece. I think I need the bracket which connects the bumper to the body. It appears to be two bolts on the bumper and I assume 3 bolts to the car. It is for a W123.
Does anyone know how long the bracket is ? I could try to make one or does anyone have one for sale?. Need both sides. Also, looking for the wrap around piece that goes on the inside of the end. I also think there is some sort of tab that goes onto the rear quarter panel. I looked at the FSM and this is my best guess at this point. Who would think a bumper would be challenging. LOL
Thanks
I was having the same issue, I had to take off the bumper because of how loose it was and it would scratch the paint everytime I hit a bump. Let me know what you come up with.
05-20-2012, 08:17 PM
#3
I fully know now what you were talking about regarding the bumper. Here is the part #A 123 880 00 14 BRACKET 002
This slips over the little arm inside the left and right side end pieces which permits one to bolt the end pieces to the rear quarter panel. If you type in the part # and google it, you will get a nice post on Benzworld.org. It lists every part. I am looking now for the part. Someone commented that they bought the entire set of brackets, fastners, et cet (a kit ???) for about $50.00. I will keep you posted.
Here is a picture of the "tang" that slips over the inner arm. It has a rubber / vinyl jacket and the arm itself has one too.
This post was last modified: 05-20-2012, 08:18 PM by Greazzer.
Attached Files
Image(s)Ninth Year Anniversary with STD on 1-9-2020
visit: www.dieselfuelinjector.guru
Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.
RED W123 - left Germany as 240D in 1982. Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
Hey,
I fully know now what you were talking about regarding the bumper. Here is the part #A 123 880 00 14 BRACKET 002
This slips over the little arm inside the left and right side end pieces which permits one to bolt the end pieces to the rear quarter panel. If you type in the part # and google it, you will get a nice post on Benzworld.org. It lists every part. I am looking now for the part. Someone commented that they bought the entire set of brackets, fastners, et cet (a kit ???) for about $50.00. I will keep you posted.
Here is a picture of the "tang" that slips over the inner arm. It has a rubber / vinyl jacket and the arm itself has one too.
Attached Files
Image(s)Ninth Year Anniversary with STD on 1-9-2020
visit: www.dieselfuelinjector.guru
Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.
RED W123 - left Germany as 240D in 1982. Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
05-21-2012, 06:34 PM
#4
(05-20-2012, 08:17 PM)Greazzer Hey,
I fully know now what you were talking about regarding the bumper. Here is the part #A 123 880 00 14 BRACKET 002
This slips over the little arm inside the left and right side end pieces which permits one to bolt the end pieces to the rear quarter panel. If you type in the part # and google it, you will get a nice post on Benzworld.org. It lists every part. I am looking now for the part. Someone commented that they bought the entire set of brackets, fastners, et cet (a kit ???) for about $50.00. I will keep you posted.
Here is a picture of the "tang" that slips over the inner arm. It has a rubber / vinyl jacket and the arm itself has one too.
Excellent! I was going to make one but I had no idea where to actually start, I would rather buy a set though due to the limited amount of time I actually have between working 50 to 60 hours a week
Purplecomputer
05-21-2012, 06:34 PM #4(05-20-2012, 08:17 PM)Greazzer Hey,
I fully know now what you were talking about regarding the bumper. Here is the part #A 123 880 00 14 BRACKET 002
This slips over the little arm inside the left and right side end pieces which permits one to bolt the end pieces to the rear quarter panel. If you type in the part # and google it, you will get a nice post on Benzworld.org. It lists every part. I am looking now for the part. Someone commented that they bought the entire set of brackets, fastners, et cet (a kit ???) for about $50.00. I will keep you posted.
Here is a picture of the "tang" that slips over the inner arm. It has a rubber / vinyl jacket and the arm itself has one too.
Excellent! I was going to make one but I had no idea where to actually start, I would rather buy a set though due to the limited amount of time I actually have between working 50 to 60 hours a week
05-21-2012, 06:48 PM
#5
I ordered enough for 2 sets. Do you want one .... Let me know.
Ninth Year Anniversary with STD on 1-9-2020
visit: www.dieselfuelinjector.guru
Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.
RED W123 - left Germany as 240D in 1982. Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
Ha Ha .... work sucks !!!!
I ordered enough for 2 sets. Do you want one .... Let me know.
Ninth Year Anniversary with STD on 1-9-2020
visit: www.dieselfuelinjector.guru
Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.
RED W123 - left Germany as 240D in 1982. Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
05-22-2012, 09:57 AM
#6
(05-21-2012, 06:48 PM)Greazzer Ha Ha .... work sucks !!!!
I ordered enough for 2 sets. Do you want one .... Let me know.
That would be great, PM sent
Purplecomputer
05-22-2012, 09:57 AM #6(05-21-2012, 06:48 PM)Greazzer Ha Ha .... work sucks !!!!
I ordered enough for 2 sets. Do you want one .... Let me know.
That would be great, PM sent
05-22-2012, 11:48 AM
#7
Ninth Year Anniversary with STD on 1-9-2020
visit: www.dieselfuelinjector.guru
Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.
RED W123 - left Germany as 240D in 1982. Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
PM sent back. I am waiting on some other parts from a fellow forum member. Once they arrive and I put this damm thing together, I will let you know.
Ninth Year Anniversary with STD on 1-9-2020
visit: www.dieselfuelinjector.guru
Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.
RED W123 - left Germany as 240D in 1982. Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
Users browsing this thread:
7 Guest(s)
7 Guest(s)
Users browsing this thread:
7 Guest(s)
7 Guest(s)