sassparilla_kid's 300D Turbodiesel
sassparilla_kid's 300D Turbodiesel
01-20-2012, 02:43 AM
#101
This post was last modified: 01-20-2012, 02:55 AM by sassparilla_kid.
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
01-20-2012, 02:43 AM #101ALSO!!!! Still can't decide about whether or not I wanna straight pipe the exhaust or fix the leak. My pop keeps nagging me about fixing the broken flex pipe, and I can't decide whether or not I want to fix it or just get some lenths of pipe and some pre-bent pieces and straight pipe it, although I would probably put a generic magnaflow muffler or something on it as well
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
01-25-2012, 01:35 AM
#102
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
01-25-2012, 01:35 AM #102Boost turned up, just needs a little fine tuning. Next, non-egr manifolds. After that, still cant decide between A/W intercooler or water/methanol injection, although IP work has made its way onto the list, along with possible propane injection. I have $150+/- left from my vegetable oil conversion grant, and if I can somehow remotely tie it in to to one of these mods I can get reimbursed.
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
01-25-2012, 10:44 AM
#103
***********************************************
1993 300D 2.5L turbo. W124.128 2.5L 602.962
1991 350SD W126.134 Transplanted a 3.0L 603.961 into it.
The water/methanol injetion can be tied to the veggie conversion. I've read that it keeps the veggie from gumming up things like the rings.
***********************************************
1993 300D 2.5L turbo. W124.128 2.5L 602.962
1991 350SD W126.134 Transplanted a 3.0L 603.961 into it.
01-25-2012, 01:11 PM
#104
I guess that means I should start researching the subject so I can order stuff!!! Haha
Also, turning up the boost did not help much since the turbo takes sooo long to spool that by the time it reaches about 12-13psi its time to shift gears
I guess that means more fuel is necessary
This post was last modified: 01-25-2012, 01:15 PM by sassparilla_kid.
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
01-25-2012, 01:11 PM #104Yeah I've read that also, probably gonna be the route I go... for now that is!!
I guess that means I should start researching the subject so I can order stuff!!! Haha
Also, turning up the boost did not help much since the turbo takes sooo long to spool that by the time it reaches about 12-13psi its time to shift gears
I guess that means more fuel is necessary
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
01-26-2012, 10:06 AM
#105
Back to way farther back in this thread: When I removed the stock intake system because it was rattling like a coffee can full of marbles I got a Specter 3"-2" reducer a 45 and a cone filter and ran a hose from the breather along the bowden cable down to the ground. I ran that setup for about 2 years also. I didn't notice any change in oil consumption, but it smelled horrible, like a burning clutch. It would have a curl of oil vapor coming out from under it whenever you weren't moving. It would generally blow into the window of any drive through restaurant I went to, so it had its moments
1984 300SD 296k
1983 300SD 327k - RIP 1/2012
Never attribute to malice that which can be adequately explained by stupidity.
Serial Crusher
01-26-2012, 10:06 AM #105On my '83 I ran straight exhaust for about 2 years, It isn't ridiculously loud if it isn't leaking. You can definitely hear the turbo, but the engine noise is a very low tone-drone, pretty pleasing to the ear. This is a straight pipe the entire length of the stock system though, standard 2". Due to rust I cut out the bimuffler and post muffler. The trick then is hanging the exhaust, since the bimuffler hangers are way out on the sides. I wasn't too wild about welding on the car with all the asphalt and interior in place to I tacked a piece of angle to the pipe to bridge between the bimuffler hangers. The shorter you go the louder the engine drone is, but it doesn't seem to change the volume of the turbo. My flexpipe broke too and I wound up removing the tailpipe completely until I could find a suitable replacement or solution. It was heinously loud then (of course) but you could hear the turbo singing all the way down to an idle.
Back to way farther back in this thread: When I removed the stock intake system because it was rattling like a coffee can full of marbles I got a Specter 3"-2" reducer a 45 and a cone filter and ran a hose from the breather along the bowden cable down to the ground. I ran that setup for about 2 years also. I didn't notice any change in oil consumption, but it smelled horrible, like a burning clutch. It would have a curl of oil vapor coming out from under it whenever you weren't moving. It would generally blow into the window of any drive through restaurant I went to, so it had its moments
1984 300SD 296k
1983 300SD 327k - RIP 1/2012
Never attribute to malice that which can be adequately explained by stupidity.
01-26-2012, 02:52 PM
#106
As for the exhaust I am planning on running a straight pipe instead of how the stock system is set up, although I will probably get a magnaflow muffler or something to keep it from getting too loud while still not impeding performance too much
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
01-26-2012, 02:52 PM #106Haha awesome, yeah I went went with a fram 8038 filter and did the same thing with the breather, although there is such little blow by that I rarely if ever notice any unpleasant smells, although when I was looking under the car about a week ago I noticed that directly behind it the car is nice and oiled up. I guess if we had snow in sunny california I wouldn't have to worry about salt!
As for the exhaust I am planning on running a straight pipe instead of how the stock system is set up, although I will probably get a magnaflow muffler or something to keep it from getting too loud while still not impeding performance too much
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
01-30-2012, 12:36 AM
#107
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
01-30-2012, 12:36 AM #107So after turning up the boost to about 12 psi or so, I have concluded due to the fact that I have stock fuel and since the turbo takes sooo long to spool, it has made no considerable difference... for now that is
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
01-30-2012, 02:41 AM
#109
Anybody know what size the ALDA nut is? I dont really feel like grinding down any of my good wrenches so I'll probably just end up buying one
On second thought I'll just check it with my fancy new digital micrometer I bought to use in my manufacturing processes class
This post was last modified: 01-30-2012, 02:42 AM by sassparilla_kid.
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
01-30-2012, 02:41 AM #109Not yet, I may try it during the week. I ended up spending my time trying to get the central door locking system working, to no avail. At least I discovered the actuators for the rear doors leak but there is still one more leak I can't pinpoint and it is irritating to say the least.
Anybody know what size the ALDA nut is? I dont really feel like grinding down any of my good wrenches so I'll probably just end up buying one
On second thought I'll just check it with my fancy new digital micrometer I bought to use in my manufacturing processes class
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
01-30-2012, 11:10 AM
#110
1984 300SD 296k
1983 300SD 327k - RIP 1/2012
Never attribute to malice that which can be adequately explained by stupidity.
Serial Crusher
01-30-2012, 11:10 AM #110Do you have the Garrett or the KKK? I've read on another thread here that the Garrett spools more slowly, and it definitely seems to be the case. Panz3r 2 spools a lot more slowly than Panz3r 1, which had the KKK. My new one also has stock exhaust and intake. I vaguely remember a slight increase in throttle response with the the changes I made to the intake and exhaust on my last one.
1984 300SD 296k
1983 300SD 327k - RIP 1/2012
Never attribute to malice that which can be adequately explained by stupidity.
01-30-2012, 01:38 PM
#112
As for the wrench, if I dont have/cant find one I'll just borrow one from the auto shop at school for a couple minutes next time Im in there
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
01-30-2012, 01:38 PM #112I have the garrett, maybe one day I'll be able to afford one of those fancy vnt's I see people talking about so frequently
As for the wrench, if I dont have/cant find one I'll just borrow one from the auto shop at school for a couple minutes next time Im in there
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
01-31-2012, 12:39 PM
#113
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
01-31-2012, 12:39 PM #113Just use a crescent wrench. Its not like your gonna put the alda back on anyway and dump the exhaust straight to the ground right where it starts to curve to go under the car. It will sound amazing and WILL NOT resonate at all. There. Problems solved haha
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
01-31-2012, 12:56 PM
#114
'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
I'm totally considering doing this... I want to get a turn down and bolt that where the exhaust has the connection so I can put the muffler and stuff back on. If anything, I'm taking this crap off so I can hear this thing breathe!
'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
01-31-2012, 02:01 PM
#115
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
01-31-2012, 02:01 PM #115Turbo/engine sounds sweet with only the downpipe and nothing else
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
01-31-2012, 02:59 PM
#116
I would bet a turn down faced off to the side might help with any in-car noise. But then again my stereo will help with that anyways haha
'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
You sealed the deal... it's comin' off! Turn-down or not... It's getting removed lol
I would bet a turn down faced off to the side might help with any in-car noise. But then again my stereo will help with that anyways haha
'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
01-31-2012, 03:44 PM
#117
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
01-31-2012, 03:44 PM #117I think I should just dump the exhaust out behind the passenger side front wheel, that way when I get a big fancy pump I can smoke out anybody to the right of me lolol
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
01-31-2012, 09:03 PM
#118
1984 300SD 296k
1983 300SD 327k - RIP 1/2012
Never attribute to malice that which can be adequately explained by stupidity.
Serial Crusher
01-31-2012, 09:03 PM #118If you have an open downpipe and any kind of aftermarket air filter you really need to keep up on filter maintenance. Idling it will dry out a cotton gauze filter in no time. Something to watch out for.
1984 300SD 296k
1983 300SD 327k - RIP 1/2012
Never attribute to malice that which can be adequately explained by stupidity.
01-31-2012, 11:29 PM
#119
(01-31-2012, 09:03 PM)Serial Crusher If you have an open downpipe and any kind of aftermarket air filter you really need to keep up on filter maintenance. Idling it will dry out a cotton gauze filter in no time. Something to watch out for.
Thats one reason why dry filters are far superior.
(01-31-2012, 02:59 PM)capflya You sealed the deal... it's comin' off! Turn-down or not... It's getting removed lol
I would bet a turn down faced off to the side might help with any in-car noise. But then again my stereo will help with that anyways haha
This is what mine looks like to give everyone an idea
(01-31-2012, 03:44 PM)sassparilla_kid I think I should just dump the exhaust out behind the passenger side front wheel, that way when I get a big fancy pump I can smoke out anybody to the right of me lolol
People at the bus stop dont particularly care for me exhaust.... haha It's not even pointed in their direction and I can still leave em in a cloud
This post was last modified: 01-31-2012, 11:35 PM by Captain America.
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
01-31-2012, 11:29 PM #119(01-31-2012, 09:03 PM)Serial Crusher If you have an open downpipe and any kind of aftermarket air filter you really need to keep up on filter maintenance. Idling it will dry out a cotton gauze filter in no time. Something to watch out for.
Thats one reason why dry filters are far superior.
(01-31-2012, 02:59 PM)capflya You sealed the deal... it's comin' off! Turn-down or not... It's getting removed lol
I would bet a turn down faced off to the side might help with any in-car noise. But then again my stereo will help with that anyways haha
This is what mine looks like to give everyone an idea
(01-31-2012, 03:44 PM)sassparilla_kid I think I should just dump the exhaust out behind the passenger side front wheel, that way when I get a big fancy pump I can smoke out anybody to the right of me lolol
People at the bus stop dont particularly care for me exhaust.... haha It's not even pointed in their direction and I can still leave em in a cloud
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
02-01-2012, 12:33 AM
#120
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
02-01-2012, 12:33 AM #120Im gonna try to get some pipe in the next couple days, then work on taking the exhaust out, cutting out the resonator and muffler, inserting pipe, and reattaching to car. Seems like the simplest option to me
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
02-14-2012, 04:55 PM
#121
However, it looks like intercooling has made its way onto the list of things to do lol
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
02-14-2012, 04:55 PM #121Have not done anything performance related to the car lately, just got the instrument panel all functional and did the 4 brake light mod yesterday since one of my classes was cancelled.
However, it looks like intercooling has made its way onto the list of things to do lol
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
02-15-2012, 09:07 AM
#122
? Shipping should only be like $400 out to cali haha
This post was last modified: 02-15-2012, 09:07 AM by Simpler=Better.
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
02-15-2012, 09:07 AM #122I hung a side-exit straight pipe behind the passenger rear door and in front of the rear tire. It wasn't too loud, but if I did it again I would have put a turn-down on the end. Want to buy my old side-exit exhaust ? Shipping should only be like $400 out to cali haha
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
02-15-2012, 03:55 PM
#123
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
02-15-2012, 03:55 PM #123Thanks for te offer but I think I can probably manage something a little cheaper lol
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
02-15-2012, 10:40 PM
#124
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
02-15-2012, 10:40 PM #124Does anybody know if a stock garrett can have the compressor housing rotated counter-clockwise or something to facilitate an IC, or does it need to be cut and re-welded
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
02-15-2012, 11:19 PM
#126
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
02-15-2012, 11:19 PM #126Awesome! That makes this project about 100 times easier lol, I guess I need to order an IC, amongst other things. Already have the w115 manifold thanks to Mr. DeliveryValve!
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
02-16-2012, 10:20 AM
#127
Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
beware those bolts are in a pretty tight space. I've made a shorty open wrench to get at them. Maybe not so tight once you pull off the manis or whatever.
Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
02-16-2012, 02:26 PM
#128
I don't really like having to work on anything more than once or twice, which is why I plan on getting it all ready outside of the car where it it will be a lot easier to work on. At least this is what my experience tell me I should do haha
Which of these two do y'all think will work best? I like the straight through design more than that other kind because it is smaller and eliminates turns
http://www.ebay.com/itm/140669237191?ssP...1438.l2649
http://www.ebay.com/itm/160607341114?ssP...1438.l2649
Btw I am also thinking about adding water/methanol injection at the same time, unless intercooling will present some sort of a problem with this?
This post was last modified: 02-16-2012, 02:32 PM by sassparilla_kid.
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
02-16-2012, 02:26 PM #128Yeah since I have a non-egr exhaust manifold and the w115 intake, and an extra garrett that will hopefully be getting rebuilt with a 60 trim comp wheel to handle a little more boost, I'm going to try to get everything all fabbed up before hand so when it comes time all I will have to do is take the old turbo and manifolds out, and then swap in all the new stuff.
I don't really like having to work on anything more than once or twice, which is why I plan on getting it all ready outside of the car where it it will be a lot easier to work on. At least this is what my experience tell me I should do haha
Which of these two do y'all think will work best? I like the straight through design more than that other kind because it is smaller and eliminates turns
http://www.ebay.com/itm/140669237191?ssP...1438.l2649
http://www.ebay.com/itm/160607341114?ssP...1438.l2649
Btw I am also thinking about adding water/methanol injection at the same time, unless intercooling will present some sort of a problem with this?
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
02-20-2012, 02:49 AM
#129
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
02-20-2012, 02:49 AM #129I would go with the CXRacing one if you can fit it
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
02-20-2012, 03:54 AM
#130
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
02-20-2012, 03:54 AM #130Yeah that's what I was thinking, I definitely think it will be large enough haha
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
04-02-2012, 10:31 PM
#131
So far I have straight piped the exhaust, it could use with an ALDA adjustment, lots of smoke when I press the accelerator in neutral. Hopefully it spools up nice. Also need to get a tip that's turned down, so I won't be go-go-gadget smoke-screening/deafening any officers of the law
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
04-02-2012, 10:31 PM #131Since I'm on spring break this week, I plan on getting as much stuff done on the car as I can.
So far I have straight piped the exhaust, it could use with an ALDA adjustment, lots of smoke when I press the accelerator in neutral. Hopefully it spools up nice. Also need to get a tip that's turned down, so I won't be go-go-gadget smoke-screening/deafening any officers of the law
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
04-03-2012, 02:47 PM
#132
(04-02-2012, 10:31 PM)sassparilla_kid Also need to get a tip that's turned down, so I won't be go-go-gadget smoke-screening/deafening any officers of the law
My exhaust is proly 3-3.5" down pipe back. The last 2 feet or so has this chrome trucker stack welded on. Pack o' smokes is 3.5" So i think I smoke screen out about a 4.5-5" pipe. Just don't press hard on the pedal when the fuzz are behind you.
My vanity plates coming say "SOOT" hopefully this does not increase my chances for pull over. (I know it does)
" straighten up that star on the grill, assholes."
lgreeley83
04-03-2012, 02:47 PM #132(04-02-2012, 10:31 PM)sassparilla_kid Also need to get a tip that's turned down, so I won't be go-go-gadget smoke-screening/deafening any officers of the law
My exhaust is proly 3-3.5" down pipe back. The last 2 feet or so has this chrome trucker stack welded on. Pack o' smokes is 3.5" So i think I smoke screen out about a 4.5-5" pipe. Just don't press hard on the pedal when the fuzz are behind you.
My vanity plates coming say "SOOT" hopefully this does not increase my chances for pull over. (I know it does)
" straighten up that star on the grill, assholes."
04-03-2012, 03:04 PM
#133
(04-03-2012, 02:47 PM)lgreeley83(04-02-2012, 10:31 PM)sassparilla_kid Also need to get a tip that's turned down, so I won't be go-go-gadget smoke-screening/deafening any officers of the law
My exhaust is proly 3-3.5" down pipe back. The last 2 feet or so has this chrome trucker stack welded on. Pack o' smokes is 3.5" So i think I smoke screen out about a 4.5-5" pipe. Just don't press hard on the pedal when the fuzz are behind you.
My vanity plates coming say "SOOT" hopefully this does not increase my chances for pull over. (I know it does)
I agree no fast take-offs when around the fuzz. And those vanity plates are gonna be awesome!! I just cut out the mufflers and welded in some 2.5" pipe in their place, so not as big as yours but it still spools much quicker now! I'll try to get a video of the exhaust in a little while, I need to have breakfast first and take a shower and all that stuff
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
04-03-2012, 03:04 PM #133(04-03-2012, 02:47 PM)lgreeley83(04-02-2012, 10:31 PM)sassparilla_kid Also need to get a tip that's turned down, so I won't be go-go-gadget smoke-screening/deafening any officers of the law
My exhaust is proly 3-3.5" down pipe back. The last 2 feet or so has this chrome trucker stack welded on. Pack o' smokes is 3.5" So i think I smoke screen out about a 4.5-5" pipe. Just don't press hard on the pedal when the fuzz are behind you.
My vanity plates coming say "SOOT" hopefully this does not increase my chances for pull over. (I know it does)
I agree no fast take-offs when around the fuzz. And those vanity plates are gonna be awesome!! I just cut out the mufflers and welded in some 2.5" pipe in their place, so not as big as yours but it still spools much quicker now! I'll try to get a video of the exhaust in a little while, I need to have breakfast first and take a shower and all that stuff
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
04-03-2012, 03:08 PM
#134
I just cut out the mufflers and welded in some 2.5" pipe in their place, so not as big as yours but it still spools much quicker now! I'll try to get a video of the exhaust in a little while, I need to have breakfast first and take a shower and all that stuff
[/quote]
Mine is unnecessarily big, but it was there when I bought it. SOOT BAZOOKA!
" straighten up that star on the grill, assholes."
lgreeley83
04-03-2012, 03:08 PM #134[/quote]
I just cut out the mufflers and welded in some 2.5" pipe in their place, so not as big as yours but it still spools much quicker now! I'll try to get a video of the exhaust in a little while, I need to have breakfast first and take a shower and all that stuff
[/quote]
Mine is unnecessarily big, but it was there when I bought it. SOOT BAZOOKA!
" straighten up that star on the grill, assholes."
04-03-2012, 03:10 PM
#135
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
04-03-2012, 03:10 PM #135At least yours is already big for when you win the lottery and swap in an OM606 with a dieselmeken pump and a big turbo
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
04-27-2012, 05:21 PM
#136
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
04-27-2012, 05:21 PM #136Got all of my water/methanol stuff, I plan on installing that along with my egr-less manifolds and egt stuff tomorrow
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
04-27-2012, 08:41 PM
#137
Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Should be nice. Run some of that booze and you'll for sure feel a nice smooth liveliness to your top end. Just kinda pricey to keep up on that stuff.
Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
04-28-2012, 01:30 AM
#138
(04-27-2012, 08:41 PM)larsalan Should be nice. Run some of that booze and you'll for sure feel a nice smooth liveliness to your top end. Just kinda pricey to keep up on that stuff.
Yeah I'll probably only run the methanol on special occasions, and just use water the rest of the time. It should still cool the charge air some I think
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
04-28-2012, 01:30 AM #138(04-27-2012, 08:41 PM)larsalan Should be nice. Run some of that booze and you'll for sure feel a nice smooth liveliness to your top end. Just kinda pricey to keep up on that stuff.
Yeah I'll probably only run the methanol on special occasions, and just use water the rest of the time. It should still cool the charge air some I think
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
04-28-2012, 06:09 AM
#139
Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'
04-28-2012, 06:12 PM
#140
When I get all my stuff in I'm gonna write "W.E.P." near the switch lol
This post was last modified: 04-28-2012, 06:13 PM by sassparilla_kid.
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
04-28-2012, 06:12 PM #140Well it will clean out the extra carbon from running wvo, at any rate, or whatever little there is in there after my very frequent italian tune ups
When I get all my stuff in I'm gonna write "W.E.P." near the switch lol
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
05-19-2012, 06:43 PM
#142
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
05-19-2012, 06:43 PM #142Half way through the manifolds and stuff, and holy shit are the turbo-to-exhaust manifold nuts a bitch to get off!! This is definitely going to be a two day project for me lol. ugh, why couldn't mercedes have made this easier to do
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
05-19-2012, 09:02 PM
#143
" straighten up that star on the grill, assholes."
lgreeley83
05-19-2012, 09:02 PM #143I read you were doing this. Me to proly in a few days or so. Ive been spraying all the manifold and turbo nuts once a day for 3 days now hoping it doesnt go.so.bad for me.. Hope you get em off.
" straighten up that star on the grill, assholes."
05-19-2012, 10:49 PM
#144
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
05-19-2012, 10:49 PM #144I decided to stop for the day and clean myself up and go get some fooood. I have the intake manifold off, but the turbo and exhaust are not wanting to come out as a single unit due to space and what not, so I only have one turbo to exhaust bolt left and then it should be smoooooth sailing from here on out!!
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
05-20-2012, 08:37 AM
#145
" straighten up that star on the grill, assholes."
lgreeley83
05-20-2012, 08:37 AM #145Hmmm. Just not enough room? It seemed others were able to get exhaust and turbo off together. Thanks for posting. Giving me the tips... what are you doing for manifold nuts? Did you buy new?
" straighten up that star on the grill, assholes."
05-20-2012, 12:17 PM
#146
Purplecomputer
05-20-2012, 12:17 PM #146I had the same issue, everything was rusted for when I had to take off the manifolds to change the gasket. I had to grind out the bolts!
05-20-2012, 02:01 PM
#147
(05-20-2012, 08:37 AM)lgreeley83 Hmmm. Just not enough room? It seemed others were able to get exhaust and turbo off together. Thanks for posting. Giving me the tips... what are you doing for manifold nuts? Did you buy new?
Yeah I'm just having some trouble with room and stuff. I think if I pulled extremely hard I could probably get the manifold and turbo off together, but the oil drain from the turbo doesn't want to bend far enough for them to both come off at once. Also, I'm just gonna re-use the manifold nuts, mostly because I don't feel like going out and buying more haha, I'll let you know how it turns out.
(05-20-2012, 12:17 PM)Purplecomputer I had the same issue, everything was rusted for when I had to take off the manifolds to change the gasket. I had to grind out the bolts!
Damn!! My manifold nuts weren't that tight, only the ones holding the turbo on. Everything else came off relatively easily, more or less.
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
05-20-2012, 02:01 PM #147(05-20-2012, 08:37 AM)lgreeley83 Hmmm. Just not enough room? It seemed others were able to get exhaust and turbo off together. Thanks for posting. Giving me the tips... what are you doing for manifold nuts? Did you buy new?
Yeah I'm just having some trouble with room and stuff. I think if I pulled extremely hard I could probably get the manifold and turbo off together, but the oil drain from the turbo doesn't want to bend far enough for them to both come off at once. Also, I'm just gonna re-use the manifold nuts, mostly because I don't feel like going out and buying more haha, I'll let you know how it turns out.
(05-20-2012, 12:17 PM)Purplecomputer I had the same issue, everything was rusted for when I had to take off the manifolds to change the gasket. I had to grind out the bolts!
Damn!! My manifold nuts weren't that tight, only the ones holding the turbo on. Everything else came off relatively easily, more or less.
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
05-20-2012, 03:13 PM
#148
(05-20-2012, 02:01 PM)sassparilla_kid(05-20-2012, 08:37 AM)lgreeley83 Hmmm. Just not enough room? It seemed others were able to get exhaust and turbo off together. Thanks for posting. Giving me the tips... what are you doing for manifold nuts? Did you buy new?
Yeah I'm just having some trouble with room and stuff. I think if I pulled extremely hard I could probably get the manifold and turbo off together, but the oil drain from the turbo doesn't want to bend far enough for them to both come off at once. Also, I'm just gonna re-use the manifold nuts, mostly because I don't feel like going out and buying more haha, I'll let you know how it turns out.
(05-20-2012, 12:17 PM)Purplecomputer I had the same issue, everything was rusted for when I had to take off the manifolds to change the gasket. I had to grind out the bolts!
Damn!! My manifold nuts weren't that tight, only the ones holding the turbo on. Everything else came off relatively easily, more or less.
Did you try taking a blow torch and heating them up? Works every time for me when i have a really stuck bolt/nut
Purplecomputer
05-20-2012, 03:13 PM #148(05-20-2012, 02:01 PM)sassparilla_kid(05-20-2012, 08:37 AM)lgreeley83 Hmmm. Just not enough room? It seemed others were able to get exhaust and turbo off together. Thanks for posting. Giving me the tips... what are you doing for manifold nuts? Did you buy new?
Yeah I'm just having some trouble with room and stuff. I think if I pulled extremely hard I could probably get the manifold and turbo off together, but the oil drain from the turbo doesn't want to bend far enough for them to both come off at once. Also, I'm just gonna re-use the manifold nuts, mostly because I don't feel like going out and buying more haha, I'll let you know how it turns out.
(05-20-2012, 12:17 PM)Purplecomputer I had the same issue, everything was rusted for when I had to take off the manifolds to change the gasket. I had to grind out the bolts!
Damn!! My manifold nuts weren't that tight, only the ones holding the turbo on. Everything else came off relatively easily, more or less.
Did you try taking a blow torch and heating them up? Works every time for me when i have a really stuck bolt/nut
05-20-2012, 05:32 PM
#149
FAAAAAAAACCCCKKKKKKK!!!!!!!!!!!!!!!!!!!!!!!!!!!! Tapping the hole for the egt probe and the fuckin' tap broke off!!!! WTF man!?!?!? Stupid ass "engineershandbook.com" gave me the wrong size hole, it told me to use a "Q" drill when it really should have been an "R" drill, bastards. I'm never gonna use them again to figure out hole-drill sizes
This post was last modified: 05-20-2012, 06:32 PM by sassparilla_kid.
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
05-20-2012, 05:32 PM #149Wow I am an idiot, I guess after working on the car for like 4 hours and only eating a bowl of cereal for breakfast and not drinking any liquids all day makes me overlook things. I got the last nut off in like 2 minutes when I started working on the car again today because I realised I was going about it all wrong lol. Now to drill/tap everything for egt probe & water/methanol stuff, and then paint and then back on the car, hopefully within a couple hours because I just want to be done with it all lol.
FAAAAAAAACCCCKKKKKKK!!!!!!!!!!!!!!!!!!!!!!!!!!!! Tapping the hole for the egt probe and the fuckin' tap broke off!!!! WTF man!?!?!? Stupid ass "engineershandbook.com" gave me the wrong size hole, it told me to use a "Q" drill when it really should have been an "R" drill, bastards. I'm never gonna use them again to figure out hole-drill sizes
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
Users browsing this thread:
6 Guest(s)
6 Guest(s)
Users browsing this thread:
6 Guest(s)
6 Guest(s)