Will they fit?
Will they fit?
Thanks for reading this, and I hope someone has some input on the subject.
Found a set of what I believe are 8 hole rims and winter tires off a 2000 C230 for a couple hundred dollars, I have seen similar rims put on members W123s so before they come home with me I wonder what it takes to make them fit.
Thanks for reading this, and I hope someone has some input on the subject.
You will need a least a 10mm spacer and longer lug bolts to make it work.
10mm is pretty thick, so I suggest using a hubcentric type of spacer to minimize vibrations.
.
Gota love Mercedes Diesels!
.
DeliveryValve
05-23-2012, 11:15 AM #3I think the offset on those 8 hole wheels is ET37.
You will need a least a 10mm spacer and longer lug bolts to make it work.
10mm is pretty thick, so I suggest using a hubcentric type of spacer to minimize vibrations.
.
Gota love Mercedes Diesels!
.
http://lethbridge.kijiji.ca/c-cars-vehic...Z378575682
http://lethbridge.kijiji.ca/c-cars-vehic...Z376824001
not crazy about the blue but could always paint em
Ok next rim question - looking on kijiji and found these
http://lethbridge.kijiji.ca/c-cars-vehic...Z378575682
http://lethbridge.kijiji.ca/c-cars-vehic...Z376824001
not crazy about the blue but could always paint em
(05-29-2012, 03:46 AM)83300d Ok next rim question - looking on kijiji and found these
http://lethbridge.kijiji.ca/c-cars-vehic...Z378575682
http://lethbridge.kijiji.ca/c-cars-vehic...Z376824001
not crazy about the blue but could always paint em
Yuck
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
05-29-2012, 11:02 PM #5(05-29-2012, 03:46 AM)83300d Ok next rim question - looking on kijiji and found these
http://lethbridge.kijiji.ca/c-cars-vehic...Z378575682
http://lethbridge.kijiji.ca/c-cars-vehic...Z376824001
not crazy about the blue but could always paint em
Yuck
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
05-29-2012, 11:38 PM #6The latter set is definitely better
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
Just not a big fan of the 14" stockers and maybe too anxious to be done with them! Will 17" fit even?
Seems like the rims I really want keep slipping between my fingers - both sets were removed from ebay before the bidding ended. Not sure how I feel about them so will mull it over while away from home working.
Just not a big fan of the 14" stockers and maybe too anxious to be done with them! Will 17" fit even?
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
05-30-2012, 12:13 AM #8I'm gonna put some 16X6.5" (not sure of the offset) wheels on my car, as soon as I get enough money to get them sandblasted and powder coated, and buy new tires haha.
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
http://i914.photobucket.com/albums/ac347...rus172.jpg
Now from what I could see off the Mandrus website these are the Millenium rims with a 32mm offset, but the owner isnt 100% sure. I have asked him to take some pictures of the back of the rims in the hope that they will have some offset info stamped on them.
Heading up to take a look at them next week so any input on the company and or fitment is appreciated THANKS
ALSO why cant I get the HTML link from my Photobucket account to work?????
So still looking for a set of rims and tires to replace my Bundts, and came across a guy selling these Mandrus 17" off a 1999 CLK 320.
http://i914.photobucket.com/albums/ac347...rus172.jpg
Now from what I could see off the Mandrus website these are the Millenium rims with a 32mm offset, but the owner isnt 100% sure. I have asked him to take some pictures of the back of the rims in the hope that they will have some offset info stamped on them.
Heading up to take a look at them next week so any input on the company and or fitment is appreciated THANKS
ALSO why cant I get the HTML link from my Photobucket account to work?????
1984 300D 4-speed ~200,000 miles
7.5mm M-pump, GT3582 turbo, F-Tune Performance intake/exhaust manifolds, A/A intercooler, 315 nozzles, Enlarged prechambers, Bosch 044 feed pump, Custom lightweight flywheel with 240mm clutch, Lowered, 17" AMG rims - 300 hp OM617 project
1985 300D 280,000 miles RIP
2001 F350 7.3 DP tuner, 4"exhaust, S&B intake
led-panzer
06-22-2012, 12:15 PM #11My 17's are ET 37 and fit without spacers, just needed longer lug bolts. It's a rim by rim type thing, they all fit different
1984 300D 4-speed ~200,000 miles
7.5mm M-pump, GT3582 turbo, F-Tune Performance intake/exhaust manifolds, A/A intercooler, 315 nozzles, Enlarged prechambers, Bosch 044 feed pump, Custom lightweight flywheel with 240mm clutch, Lowered, 17" AMG rims - 300 hp OM617 project
1985 300D 280,000 miles RIP
2001 F350 7.3 DP tuner, 4"exhaust, S&B intake
pics located here with adapter info I found.
http://www.superturbodiesel.com/std/thread-3700.html
They are currently on Ebay for cheap. rims, mounted good tires, balanced....
and no one wants them.
http://www.ebay.com/itm/221057530875?ssP...1555.l2649
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
you could buy my bastardized VW ATF rims that look like ronals, and spend money making an adapter.......
pics located here with adapter info I found.
http://www.superturbodiesel.com/std/thread-3700.html
They are currently on Ebay for cheap. rims, mounted good tires, balanced....
and no one wants them.
http://www.ebay.com/itm/221057530875?ssP...1555.l2649
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
Carlsson 19inch with a 40 offset so I assume they will DEFINATELY need spacers?
![[Image: carlsson_zps7c4419fc.jpg]](http://i914.photobucket.com/albums/ac347/CChief1976/carlsson_zps7c4419fc.jpg)
Its still for a 1983 300d
WOW must yet another set found on the same day. Think these would fit alot easier.
![[Image: borbet_zps518c1a54.jpg]](http://i914.photobucket.com/albums/ac347/CChief1976/borbet_zps518c1a54.jpg)
Getting these painted flat black might be the way to go.
Found another set of rims that tweaked my interest.
Carlsson 19inch with a 40 offset so I assume they will DEFINATELY need spacers?
Its still for a 1983 300d
WOW must yet another set found on the same day. Think these would fit alot easier.
Getting these painted flat black might be the way to go.
(09-23-2012, 11:09 AM)83300d Found another set of rims that tweaked my interest.
Carlsson 19inch with a 40 offset so I assume they will DEFINATELY need spacers?
Its still for a 1983 300d
WOW must yet another set found on the same day. Think these would fit alot easier.
Getting these painted flat black might be the way to go.
personally, I like the carlsson ones better. they second set just remind me of rims you find on new toyotas.
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
(09-23-2012, 11:09 AM)83300d Found another set of rims that tweaked my interest.
Carlsson 19inch with a 40 offset so I assume they will DEFINATELY need spacers?
Its still for a 1983 300d
WOW must yet another set found on the same day. Think these would fit alot easier.
Getting these painted flat black might be the way to go.
personally, I like the carlsson ones better. they second set just remind me of rims you find on new toyotas.
1974 240D 617 turbo swap, W201 5-speed, in the works project
1983 240D 616 stock, DD
1989 Chevy Astro, 617 turbo swap, T5 5-speed, 4.56 diff, work van
15 Guest(s)
15 Guest(s)